Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF NOVEMBER 20, 2019 SAM #6565
SOURCES SOUGHT

J -- Maintenance, Preservation and Repair of UF-128 & 2 Paint Floats; Paint Float 3-Tier and Paint Float 4-Tier

Notice Date

11/18/2019 1:55:21 PM
 

Notice Type

Presolicitation
 

NAICS

336611 — Ship Building and Repairing
 

Contracting Office

PUGET SOUND NAVAL SHIPYARD IMF BREMERTON WA 98314-5001 USA
 

ZIP Code

98314-5001
 

Solicitation Number

N4523A20R1053
 

Response Due

12/3/2019 11:00:00 AM
 

Archive Date

12/18/2019
 

Point of Contact

Melissa N. Oser, Contract Specialist, Phone: 3604764238, Gary Binder, Contracting Officer, Phone: 360-476-5706
 

E-Mail Address

melissa.oser@navy.mil, gary.binder@navy.mil
(melissa.oser@navy.mil, gary.binder@navy.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

INFORMATION FOR POTENTIAL OFFERORS:The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed Price (FFP) contract to accomplish maintenance, repair, and preservation of Utility Float (UF)-128 and two Paint Floats; Paint Float 3-Tier and Paint Float 4-Tier.UF-128 and Paint Floats 3-Tier and 4-Tier have the following specifications:Utility Float (UF-128) Paint Float 3-Tier Paint Float 4-TierLength: 60 FT Length: 28 FT Length: 38 FTWidth: 15 FT Width: 25 FT - 0 IN Width: 25 FT - 0 INAge: 30 YRS Age: 30 YRS Age: 30 YRSDraft: 2 FT Draft: 3 FT Draft: 4 FTLight Load: 40 Tons Light Load: 16 Tons Light Load: 17 TonsHull Type: Steel Hull Type: Steel Hull Type: SteelThe Contractor’s facility must possess the capability of accommodating the UF-128 and two Paint Floats with the dimensions as stated above.Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessels to the Contractor’s facility. Upon docking vessels, wash and clean the exterior surfaces. Blast and preserve all exterior surfaces and required interior surfaces of each vessel. Replace zinc anodes. Remove existing rubber fendering and associated hardware. Sweet-blast clean rubber material and install new fasteners and associated hardware to each vessel after reinstallation of rubber material. Straighten bent/damaged fender brackets where applicable. Replace zinc anodes on each vessel. Remove existing manhole covers and install new fasteners and associated hardware to each vessel. Install new gasket material to each tank/void access. Blast and preserve interior and exterior tank lid surfaces. Perform Ultrasonic Testing to the underwater body, hull, and freeboard surfaces to each vessel for plating thickness. Perform Ultrasonic Testing to the main-deck of each vessel for plating thickness. Perform visual inspections to the hull, main-deck, and tanks/voids to each vessel for plating and framing damage and deterioration. Apply new non-skid system to the main-deck of each vessel. Open, clean, inspect, and test all tanks and voids of each vessel. Undock the vessels. Arrange and coordinate the delivery of the vessels back to the Government with the Contracting Officer via the COR.The expected Period of Performance is scheduled to be: 10 March 2020 to 12 May 2020.The Government is contemplating a 100% small business set-aside under the North American Industry Classification System (NAICS) 336611, size 1,250 employees. The Government intends to post a request for proposals in December 2019 and anticipates award of the Firm-Fixed Price, stand-alone contract in February 2020 to the responsible contractor on a lowest price, technically acceptable basis in accordance with, but not limited to, the Federal Acquisition Regulation (FAR) 15.101-2. Offerors can view and/or download the draft notional work specifications for review at https://beta.sam.gov/.All offerors must be registered with the System for Award Management (SAM) system to receive award for Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.Notice Regarding Pre-Solicitation Synopsis:Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS & IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. This pre-solicitation announcement is released in accordance with FAR 5.2. Information provided in response to this pre-solicitation announcement is for informational and planning purposes only, will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract.Contracting Officer Address:Code 440Puget Sound Naval Shipyard and IMF1400 Farragut Ave STOP 2026Bremerton, WA 98314-2026Place of Contract Performance is at the Contractor’s Facility.
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/f7f1acfbf42640af9bc37b20facb2d5e/view)
 

Place of Performance

Address: WA, USA

Country: USA
 

Record

SN05498095-F 20191120/191120064127 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |