SOURCES SOUGHT
M -- Regional Hydraulic Dredging Activities
- Notice Date
- 11/18/2019 4:31:04 AM
- Notice Type
- Sources Sought
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- US ARMY ENGINEER DISTRICT LOUISVILL LOUISVILLE KY 40202-2230 USA
- ZIP Code
- 40202-2230
- Solicitation Number
- W912QR-RegionalDredge
- Response Due
- 12/3/2019 7:00:00 AM
- Archive Date
- 12/31/2019
- Point of Contact
- Heather Bauer, Phone: 5023156192
- E-Mail Address
-
heather.d.bauer@usace.army.mil
(heather.d.bauer@usace.army.mil)
- Description
- 1. Project Title: Regional Hydraulic Dredging Activities2. Project Location: Ohio River and Tributaries3. Project NAICS Code: 2379904. Response Date: 03 December 2019 at 10:00 am Eastern Standard Time 5. Short Project Description: A market survey is being conducted to determine if there are a reasonable number of interested small business concerns to set this future project aside for them. If your firm is a Small Business (SB), certified HUBZone, 8a, Woman-Owned Small Business (WOSB), or Service Disabled Veteran Owned Small Business (SDVOSB) and you are interested in this project please respond appropriately. The U.S. Army Corps of Engineers - Louisville District has been tasked to solicit for and award a Single Award Task Order Contract (SATOC) Indefinite Delivery/Indefinite Quantity (IDIQ) to furnish, transport, and operate one cutterhead pipeline dredge with attendant plant for Maintenance Dredging in support of Navigation of the Ohio River and its principal tributaries. This will be a regional SATOC IDIQ to include the following Districts: Louisville District (LRL-Lakes Rivers Louisville), Huntington District (LRH-Lakes Rivers Huntington), Nashville District (LRN-Lakes Rivers Huntington), Pittsburgh District (LRP-Lakes Rivers Pittsburgh, and St. Louis District (MVS-Mississippi Valley St. Louis).Projects will be awarded by individual task orders. The maximum cumulative value of the contract is $45,000,000.00. Contract duration is estimated at five years. The estimated cost range for each task order is between $5,000,000 and $10,000,000.00. NAICS code is 237990 (size standard: $39.5 million). All interested SB, certified HUBZone, 8a, WOSB, and SDVOSB contractors should respond to this survey by email by 03 December 2019 by 10:00 am Eastern Standard Time.6. Type of Action: SATOC IDIQ7. Estimated Advertisement Date: 15 Feb 20208. Estimated Award Date: 1st week of Apr 20209. Estimated Performance Period: Estimated 1 June to 1 Oct on a yearly basis for 5 Years10. Estimated Cost: $45,000,00011. Criteria: a. Projects similar in scope to this project include:The Government is seeking qualified, experienced sources capable of performing construction services consisting of dredging and disposal of an estimated 1,200,000 cubic yards per year of sediment material from the federal navigation channels on the Ohio River (RM 0 - 981.0) and tributaries. The sediments consist of primarily medium to coarse grained sands with a d50 of 0.03 inch. Dredging will occur in depths up to 33 feet (10 meters) below the water surface and in currents up to 5 knots. The dredge shall meet the following criteria: Maximum draft of 7.5 ft; Minimum 20 inches inside diameter pump discharge; Minimum of 1700 horsepower on the main pump shaft; minimum 300 horsepower on the cutterhead shaft which produces a minimum output through a pontoon pipeline of 200 feet to 3200 feet in length and a lift up to 16.5 feet as indicated in the table below; Dredge up to and including 24 inch inside diameter pump discharge, which meet the minimum requirements listed in the following table, will be considered. Minimum dredge outputs are based upon bid production conditions and do not consider bank height and dredge efficiency reduction factors. The dredge shall be capable of dredging efficiently a 200 foot to 360 foot wide cut to a depth of 33 feet. While making a 300 foot wide cut, the dredge shall be of sufficient length that the swing angle to either side of the centerline of the cut shall not exceed 55 degrees. The dredge shall have a hauling engine with minimum cable speed of 70 ft/min in currents up to 5 knots; at least two spare interchangeable pump impellers and cutterheads.Size of Dredge pump Discharge Inside Diameter20 in (508 mm)22 in (559 mm)24 in (610 mm)Minimum Continuous Power Connected Dredge Pump1700 hp (1268 kW)1800 hp (1342 kW)1800 hp (1342 kW)Minimum Continuous Power Connected Cuttershaft300 hp (224 kW)330 hp (246 kW)360 hp (268 kW)Minimum Dredge Output1084 CY/hr1172 CY/hr1229 CY/hrThe contractor shall be required to supply but not be limited to, the following equipment, fleet, and personnel in association with contract dredging contained herein, spill barge, fuel flats, auxiliary floating discharge pipe, derricks, anchor “skidder Barges, work flats, 3200 ft of pontoon mounted or floating discharge pipeline, dredge tender vessels equipped with hydraulic cranes, inspection/survey vessel with associated survey equipment, computer(s) loaded with hydrographic database and dredging software, Global Positioning System, Gyrocompass, Communications, landline disposal pipe, land pipe placing equipment, baffle plate, lighting, shallow draft pipeline equipment, supervisory and crew personnel for efficient operation, tankerman, etc., and any other required equipment necessary to efficiently dredge, dispose and verify sediment removal of sediments from the navigation channel as specified.All vessels and equipment must be certified by the U.S. Coast Guard. b. Projects similar in size to this project include: Dredging and disposal of an estimated 1,200,000 cubic yards per year of sediment material from the federal navigation channels.12. Based on the definitions above, for each project submitted, include:a. Current percentage of construction complete and the date when it was or will be completed.b. Scope of the project.c. Size of the project.d. Dollar value of the project.e. The portion and percentage of the project that was self-preformed.f. Identify the number of subcontractors by construction trade utilized for each project.13. Small Businesses are reminded under FAR 52.219-14, Limitations on Subcontract; they must perform at least 15% of the cost of the contract, no including the cost of materials, with the firm’s own employees for general construction-type procurement. Include the percentage of work that will be self-performed on this project, and how it will be accomplished.NOTE: Total submittal package shall be no longer than 8 pages. Please only include a narrative of the requested information; additional information will not be reviewed. Email responses to Heather Bauer at heather.d.bauer@usace.army.mil. If you have questions, please contact Heather Bauer at heather.d.bauer@usace.army.mil. This is NOT a Request for Proposal and does not constitute any commitment by the Government. Responses to this sources sought notice will be used by the Government to make appropriate acquisition decisions. All interested sources must respond to the future solicitation announcements separately from responses to this market survey.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/8bdeebce87b64f6388139ff66c348011/view)
- Place of Performance
- Address: 48000, KY 40202, USA
- Zip Code: 40202
- Country: USA
- Zip Code: 40202
- Record
- SN05498098-F 20191120/191120064127 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |