Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF NOVEMBER 20, 2019 SAM #6565
SOURCES SOUGHT

Z -- ROCK REMOVAL-BOSTON HARBOR FEDERAL NAVIGATION PROJECT, BOSTON, MA

Notice Date
11/18/2019 9:20:56 AM
 
Notice Type
Special Notice
 
NAICS
237990 — Other Heavy and Civil Engineering Construction
 
Contracting Office
W2SD ENDIST NEW ENGLAND CONCORD MA 01742-2751 USA
 
ZIP Code
01742-2751
 
Solicitation Number
W912WJ19X0038
 
Response Due
12/9/2019 11:00:00 AM
 
Archive Date
12/24/2019
 
Point of Contact
Elizabeth K. Glasgow, Contract Specialist, Phone: 9783188671
 
E-Mail Address
elizabeth.k.glasgow@usace.army.mil
(elizabeth.k.glasgow@usace.army.mil)
 
Description
Description(s):The Corps of Engineers New England District is soliciting comments from the construction community addressing the potential use of a Project Labor Agreement (PLA) for the following large scale construction project:Rock Removal-Boston Harbor Federal Navigation Project, Boston, MaApproximately 250,000 to 450, 000 CY of rock will be removed in the Boston Harbor Federal Navigation Project as part of the larger Boston Harbor Deepening Project.Construction cost magnitude is between $75,000,000.00 and $150,000,000.00.Rock removal will occur in the Broad Sound North Channel to -53 feet Mean Lower, Low Water (MLLW), Main Ship Channel (MSC) to the Conley Terminal including the turning basin or "MSC Notch" to - 49 feet MLLW, deepening the President Roads Anchorage and deepening the lower Reserved Channel to -49 feet MLLW.Rock removed will be placed at the Massachusetts Bay Disposal Site (MBDS) approximately 20 miles offshore.It should be noted that the mean tide in Boston Harbor is 9.5 feet and portions of the project will have been dredged to a depth of -53 feet MLLW by the start of this project, so the contractor will need to be able to operate in a channel where the water depth may be up to 60.5 feet.Period of Performance: The project is expected to take approximately 2 years to complete.A PLA is defined as a pre-hire collective bargaining agreement with one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S.C. 158(f).Federal Acquisition Regulation (FAR) Policy: Project Labor Agreement (PLA) is a tool that agencies may use to promote economy and efficiency in Federal procurement. Pursuant to Executive Order 13502, agencies are encouraged to consider requiring the use of project labor agreements in connection with large-scale construction projects. An agency may, if appropriate, require that every contractor and subcontractor engaged in construction on the project agree, for that project, to negotiate or become a party to a project labor agreement with one or more labor organizations if the agency decides that the use of project labor agreements will Advance the Federal Governments interest in achieving economy and efficiency in Federal procurement, producing labor-management stability, and ensuring compliance with laws and regulations governing safety and health, equal employment opportunity, labor and employment standards, and other matters; and Be consistent with law. Reference: Provision: 52.222-33 Notice of Requirement for Project Labor Agreement Clause 52.222-34 Project Labor Agreement. Some of the factors that may be considered regarding PLA use are: The involvement of multiple contractors and/or subcontractors working in multiple crafts or trades. The complexity of the project. Shortage of skilled labor in the region. Completion of the project will require an extended period of time. The use of PLA's on other comparable projects in this geographic area. The promotion of the Governments long term programs interests such as training of skilled workforce for future projects. The possibility of labor disputes that threaten timely completion. Additional costs from use of PLAs may be cost prohibitive. In consideration of the above factors, and any others which may be deemed appropriate, the construction community is invited to comment on the use of PLAs. Of particular interest to the Government are responses to the following questions: Should a PLA be executed on the above described Construction Project? What benefits do you believe a PLA could achieve? What other factors should the Corps consider before deciding to include PLA provisions for the construction project? Will the use of a PLA be effective in achieving economy and efficiency? If so, how? What is the estimated relative cost impact, or any other economies or efficiencies derived by the Federal Government, if using a PLA? Will a PLA impact the cost of submitting an offer? Are there any concerns regarding labor-management stability related to this project? Will the use of a PLA produce labor-management stability on this project? Have labor disputes or other labor issues contributed to project delays in the local area? Are you aware of examples of labor-management conflicts in the area which could impact the efficiency of this project, which a PLA could positively impact/resolve? What market share does union labor in construction trades have in the geographic area? Which existing Collective Bargaining Agreements will expire during construction of this project? Will use of a PLA be conducive to ensuring compliance with laws and regulations governing safety and health, equal employment opportunity, labor and employment standards, and other relevant matters on this project? Are there instances where these standards have not been met on Federal contracts in the local area? Were PLAs used for those specific contracts? This project will require construction contractors and/or subcontractors employing workers in multiple crafts or trades; do you foresee any work on this project that may result in both the prime contractor and at least one subcontractor, or two or more subcontractors, employing the same trade? Are there concerns by prime contractors on the availability of skilled construction labor? Are there large scale construction projects in the area (over $25M, within 50 miles) which could impact availability of skilled labor for this project? What is the anticipated volatility in the labor market for the trades required for the execution of the project? Are existing apprentice programs providing sufficient numbers of skilled workers for future requirements? Is the proposed schedule/completion time one which would benefit from a PLA - if so, how? Will a PLA impact the completion time? Would a PLA benefit a project which contains a unique and compelling mission-critical schedule? Have comparable projects been undertaken by Federal, State, municipal, or private entities in the geographic area of this project? For each project, please indicate if a PLA was used, the initial and final cost, number of trades on the project, if the project was completed on time, and if there were any challenges such as labor shortages, labor related delays, safety issues, etc .. Will the use of PLAs impact the ability of potential Offerors and subcontractors to meet small-business utilization goals?Please provide your responses to these questions and any comments via email to Elizabeth Glasgow, Contract Specialist, at Elizabeth.k.glasgow@usace.army.mil no later than 2pm EST on December 9, 2019. Government Agency URL: www.nae.usace.army.milGovernment Agency URL Description: New England District, Corps of Engineers
 
Web Link
SAM.gov Permalink
(https://beta.sam.gov/opp/87e3fb2ae2e94bad935005b4b17455aa/view)
 
Place of Performance
Address: 7000, MA, USA
Country: USA
 
Record
SN05498127-F 20191120/191120064127 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.