SOURCES SOUGHT
C -- C--DESIGN RENOVATE REHABILITATION MEDICINE - BROOKLYN, NY Project # 630A4-17-407
- Notice Date
- 11/25/2019 1:10:25 PM
- Notice Type
- Sources Sought
- NAICS
- 541330
— Engineering Services
- Contracting Office
- 242-NETWORK CONTRACT OFFICE 02 (36C242) ALBANY NY 12208 USA
- ZIP Code
- 12208
- Solicitation Number
- 36C24220R0009
- Response Due
- 11/29/2019 1:00:00 PM
- Archive Date
- 02/27/2020
- Point of Contact
- Julie Provenzano
- E-Mail Address
-
Julie.Provenzano@va.gov
(Julie.Provenzano@va.gov)
- Small Business Set-Aside
- SDVOSBC Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)
- Description
- THIS ANNOUNCEMENT IS NOT A REQUEST FOR PROPOSAL. THE GOVERNMENT WILL NOT PAY NOR REIMBURSE ANY COSTS ASSOCIATED WITH RESPONDING TO THIS REQUEST. THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT The Department of Veterans Affairs is seeking a qualified Architect-Engineering (AE) firm to provide Schematics, Investigative Services/Study, Design Development, Construction Documents, Technical Specifications, Construction Period Services, Site Visits, Cost Estimates, Shop Drawing Review, and all other related information for Project No. 630A4-17-407, Design Renovate Rehabilitation Medicine Suite and Assembly Room located at VA NEW YORK HARBOR HEALTHCARE SYSTEM, BROOKLYN CAMPUS, 800 POLY PLACE., BROOKLYN, NY 11209. This procurement is restricted to Service Disabled Veteran Owned Small Business (SDVOSB). This is a Sources Sought Notice and this requirement is being procured in accordance with the Brooks Act as implemented in FAR Subpart 36.6. Applicable NAICS code is 541330 and small business size standard of $15 Million. Magnitude of Construction is between $2,500,000.00 and $5,000,000.00. Potential contractors must be registered in SAM (www.sam.gov) at time of submission of their qualifications in order to be considered for an award. The design will be completed in a manner such that the estimated construction cost is within the VA budget. It is not expected that any new space will be added to the existing building footprint. EXISTING CONDITIONS: This requirement is necessary to correct deficiencies, upgrade obsolete mechanicals and the overall function and appearance of the Rehabilitation Medicine Suite and Assembly Room specified below for Department of Veteran Affairs, New York Harbor Healthcare System, Brooklyn Campus, Brooklyn, NY 11209. SCOPE OF SERVICE REQUIRED: The general scope of this project is to renovate and modernize the Rehabilitation Medicine Suite and Assembly Room which includes investigative site survey and design services for OSHA, JACHO, NFPA and ADA compliancy for Building #1, Second Floor North West at the New York Harbor Healthcare System, Brooklyn Campus. Design work shall address architectural, structural, mechanical, plumbing, electrical, HVAC and fire protection concerns. The design services operations flow study to maximize utilization of the existing space. All designs will follow, but are not limited to, VA Space Planning Specifications, in conjunction with the VA Master Specifications as outlined in the VA Handbook 7610. The design will also be done to ensure that it meets all the requirements / specifications for local, state, and federal codes. The estimated construction cost for the design must fall within the VA budget. Final design submission shall include phased drawings of all demolition, and construction work as required to allow the continuous use all of the floors and areas associated around each construction area. The A/E shall consider the impact to the other areas and floors of the facility that the renovations may cause. The A/E shall develop construction phasing plans to minimize the disruption to the facility and other spaces. I. A/E SCOPE OF SERVICES 1. The A/E shall provide all A/E services necessary for preparation of complete construction documents and construction period services. Work includes verification of existing As-Built drawings, preparation of contract drawings & specifications, and detailed cost estimate. The design shall provide Certified Industrial Hygienist (CIH) services for preparation of asbestos drawings and specifications and asbestos air monitoring. 2. Project completion of construction documents, including final design, contract drawings, specifications, and cost estimate is to be 400 calendar days from award of contract. 3. Provide a detailed material/labor cost estimate for construction of this project at the 100% review stage. 4. Attend pre-bid job walkthrough and provide all engineering responses to questions asked by potential bidders and issue an addendum, if necessary. Attend pre-construction meeting and will be required to answer any technical project related questions and provide meeting minutes. 5. Provide a technical review of all project submittals/shop drawings related to the project and provide all required responses to any design/conflict questions encountered in these areas during construction in an expeditious manner, (two- week turnaround on all submittals) maximum. 6. Provide expeditious responses to all design/conflict questions encountered during the construction term. 7. Upon completion of the project, the A/E will do a complete walkthrough and review (punch list) of the completed project work and verification of the contractual obligations and prepare a written report by close of business the following day. 8. Upon completion of the project, provide a set of stamped Architectural E1 (30 x42 ) as-built drawings, as well as complete electronic sets in PDF and AutoCAD formats (including reference files/drawings/specifications). 9. The A/E is responsible for performing a site survey and investigative study of assembly room and Rehabilitation Medicine Suites and prepare design options to the VA. This is to include interviewing personnel in Rehabilitation Medicine and Engineering Services to design a new state of the art rehabilitation suite that meets Commission on Accreditation of Rehabilitation Facilities (CARF) requirements and the latest hospital standards and codes such as OSHA, JACAHO, NFPA and VA design guidelines and the needs of the staff. Upon approval, the A/E shall design a full functional set of drawings and specifications to correct deficiencies found in survey. 10. The A/E is responsible for project design relocating and re-constructing the existing Assembly Room to create more space for the new Rehab Medicine Suite, performing a gut renovation of the Assembly Room and Rehabilitation Suites on the Second Floor North West of Building #1 that produces the desired results for a new Rehabilitation Medicine Suite. 11. The A/E is responsible for design to include, but is not limited to demolition, architectural, structural, mechanical, electrical, plumbing, fire protections system, CCTV, security and information technology. The project design includes a phasing plan and design and reconfiguration of the swing space to accommodate the Rehabilitation Suite during construction. 12. The A/E is responsible for project design includes installing a new air handling unit (AHU) and installing variable air volume boxes with Direct Digital Controls (DDC) serving the 2nd floor north west Rehabilitation Suite and corridor. Unit replacement shall consider all components associated with HVAC, such as, supply, return, exhaust, VFD, steam, chill water, secondary chill or hot water, reheat coil, louver, ductwork, diffusers, control, etc. 13. The A/E is responsible for project design which includes investigation of the current electrical systems and the demands that the new spaces may pose on the existing panels. Also determine if the correct power types are located in or near the space and if more power is needed to meet current VA standards determine where it can come from. Security and Information Technology, Telephone, CCTV, Speaker systems, Fire Alarm systems, etc. shall be evaluated and recommendations made regarding life cycle and adaptability to the new spaces. 14. The A/E is responsible for design to include installing new finishes throughout the Rehabilitation Medicine suite and corridor. The new finishes include new ceiling system, flooring, lighting, painting, hand rails, corner guards, cove base, electrical panel covers, electrical receptacles, switches, sprinkler heads, supply and return air registers, doors, frames, hardware, signage etc. 15. The A/E shall provide complete contract drawings & specifications including but not limited to: Demolition, Asbestos Abatement, Architectural, Architectural Signage, Interior Design, Finishes and Colors, Fixtures and Equipment, Structural, Plumbing, HVAC, Electrical, Fire Suppression, Phasing Requirements, Infection Control, Commissioning specs for all appropriate trades. 16. The A/E is responsible for retaining the services of a Certified Industrial Hygienist (CIH) to survey the existing 2nd floor Rehabilitation Medicine work area to determine the quantities of asbestos containing material required to be removed and to conduct asbestos air monitoring during the asbestos abatement phase of the project. 17. The A/E shall provide complete contract drawings & specifications including but not limited to: Demolition, Asbestos Abatement, Architectural, Structural, Mechanical, Plumbing, Electrical, Fire Protection, HVAC, Phasing Requirements, Infection Control, Commissioning specifications for all appropriate trades. 18. The A/E shall provide competent design and construction period services utilizing those adequately knowledgeable of the various subordinate design disciplines including, but not limited to the engineering of architectural, structural, mechanical, electrical and special systems as required by the project. 19. The A/E shall provide construction period services to include submittal review; shall also provide response to RFI review, site visits/inspections and prepare As-Built drawings from contractor mark-up and prepare a final Punch List . 20. The A/E shall be required to provide 30%, 60%, 90% and 100% design drawings and specifications for review. The A/E shall follow the submission instructions outlined in VA Program Guide PG 18-15 Volume C. 21. The A/E shall be responsible for development of the construction phasing plan, infection control risk assessment plan and the interim life safety measures plan. 22. The A/E shall provide a share point or FTP site that the VA does not have restricted access to for drawing transfer, submittal submission and review during the project. 23. The Architect/Engineer is responsible for completing the VA Privacy and Information Security Awareness training. 24. The Architect/Engineer is responsible for completing the VA Privacy Training for Personnel without Access to VA Computer Systems or Direct Access or Use to VA Sensitive Information. Contractors must provide a copy of the signed training to the COR prior to starting work and annually thereafter. Training expires 365 days after the training is taken. This requirement is in addition to any other training that may be required of the contractor and subcontractor(s). II. Industrial Hygienist: The following tasks shall be performed in accordance with VA Design Requirements: 1. Schematic Design a. Task 1 Inspect project area. b. Task 2 Sample suspect materials. c. Task 3 Review sample analysis. d. Task 4 Submit laboratory analysis. e. Task 5 Design and specify appropriate technique and approaches to asbestos abatement. f. Task 6 Review asbestos submittals and provide construction period services during construction. g. Task 7 Provide air monitoring service during asbestos abatement removal process. II. All designs shall conform to NFPA 101 Life Safety Code, NFPA 99 Healthcare Facilities, NEC, ASHRAE 90.1 and VA Standards & Criteria and all applicable NFPA Codes. III. The following must be incorporated into the A/E design: 1. Meet with VA Engineering Staff to determine the exact functional requirements to be used for the design. 2. Recommend various options for the VA engineers to evaluate. Options should include: design options, completion time, phasing, noise, dust, infection control, construction cost, impact, feasibility and compliance with overall VA objectives. 3. Provide all necessary site survey work to verify As-Built drawings and field conditions. 4. Provide construction period services and site visits. VI. The A/E shall have all available As-Built drawings (it is the A/E s responsibility to verify the accuracy of said drawings): 1. Mechanical 2. Electrical 3. Architectural 4. Structural 5. Fire Suppression 6. Plumbing 7. HVAC VII. Document reviews: The A/E shall furnish and provide three (3) sets of drawings and specifications and detailed cost estimates at completion stages of 30%, 60%, 90% and 100%. Provide three (3) sets of completed contract drawing and specifications for bidding purpose and three (3) copies of 100% detailed cost estimate. A licensed New York State professional engineer and /or architect shall stamp the contract drawings. VIII. Contract Originals and As-Built drawings: Contract originals shall be prepared on standard VA drawing sheets using AutoCad (most recent edition). The A/E shall provide one (1) set of drawings to the VA for record plans at the completion of design. Provide an electronic set and one (1) set of drawings stamped and signed by an Engineer and / or Architect licensed in the State of New York, specifications, and cost estimates at final design submission. Electronic set at 100% final stage is to be provided in both PDF and AutoCAD formats. The A/E shall incorporate all the construction changes to the As-Built drawings at the completion of the construction and the A/E shall turn over the changes in the As-Built drawings to the VA. All work shall be done at the NEW YORK HARBOR HEALTHCARE SYSTEM, BROOKLYN CAMPUS, 800 POLY PLACE, BROOKLYN, NY 11425 in accordance with the work described above and/or tasks described in this contract. COST RANGE Estimated Construction Cost Range: $2,500,000.00 and $5,000,000.00 TYPE OF CONTRACT CONTEMPLATED The Department of Veterans Affairs is contemplating awarding a firm fixed price contract. The following evaluation criteria will be used during the A/E selection process: Firms submitting SF330 data for consideration must address each of the following factors in SF330. Professional qualifications necessary for satisfactory performance of required services. Offerors will be evaluated in terms of the qualifications, competence and experience of the key personnel and technical team proposed to accomplish this work. Key personnel are individuals who will have major contract or project management responsibilities and/or will provide unusual or unique expertise. Provide a balanced licensed and or certified workforce in the following disciplines Engineering (Civil, Structural, Mechanical, Electrical, Interior Design, Fire Protection) and Architecture Submission requirements: Provide resumes for all proposed key personnel. Resumes are limited to one page each and should cite project specific experience and indicate proposed role in this contract. Provide professional registration, certification, licensure and/or accreditation. Indicate participation of key personnel in example projects in the SF-330 Part 1 Section G. Specialized experience and technical competence in the type of work required, including, where appropriate, experience in energy conservation, pollution prevention, waste reduction, and the use of recovered materials. . Offerors will be evaluated on specialized experience and technical competence in the performance of services similar to those anticipated under this contract with regard to: o Experience with design services to renovate and redesign patient facilities and medical centers. o Experience in providing post construction award services (shop drawing review, as-built drawing and Quality Assurance Plan (QAP) preparation and construction inspection services) Submission requirements: Provide up to five (5) projects completed or substantially completed within the past five (5) years that best illustrate specialized experience of the proposed team including any subcontractors in the areas outlined above. (3) Capacity to accomplish the work in the required time. This factor evaluates the ability of the firm, given their current projected workload and the availability of their key personnel, to accomplish the possible myriad of design projects in the required time. Submission requirements: The general workload and staffing capacity of the design office will be evaluated. List current projects with a design fee of greater than $20,000 being designed in the firms office. ii. Indicate the firms present workload and the availability of the project team (including sub-consultants) for the specified contract performance period; iii. Describe experience in successfully delivering projects per performance schedule, providing timely construction support, and successfully completing multiple projects with similar delivery dates Past performance. Offerors will be evaluated on past performance with Government agencies (emphasis on VA work) and private industry in terms of work quality, compliance with schedules, cost control, and stakeholder/customer satisfaction. i. Recent is defined as performance occurring within 5 years of the date of this Sources Sought, except that ongoing projects must have begun no less than one (1) year prior to the issuance of this Sources Sought. ii. Relevancy is defined as performance of work on projects that are similar in scope to the types of projects anticipated under the resultant contracts. Respondents with no previous past performance shall state this when addressing the selection criteria. Where there is no record of past performance, the proposal will be evaluated neither favorably nor unfavorably. Superior performance ratings on relevant projects may be considered more favorably in the evaluation. Submission Requirements: i. Submit a minimal of three (3) references; any of the following evaluations are acceptable: a. Contractor Performance Assessment Report System (CPARS), b. Past Performance Questionnaire (PPQ) evaluation for each project submitted under Criterion 2. ii. If a completed CPARS evaluation is available, it shall be submitted with the completed SF330 package. If there is not a completed ACASS/CPARS evaluation, the PPQ included with this notice (attachment #1) is provided for the Offeror or its team members to submit for each project included in criterion (2). If a PPQ is submitted, but an official ACASS/CPARS evaluation is found for that project in government databases, the official evaluation will take precedence. If an ACASS/CPARS evaluation is not available, ensure correct phone numbers and email addresses are provided for each contract customer/reference. If the A-E is unable to obtain a completed PPQ from a contract customer/reference for a project before the response date set forth in this notice, the A-E should complete and submit with their response the first page of the PPQ (Attachment #1), including contract and point of contact information for the respective projects. iii. A-Es should follow-up with references to ensure timely submittal of questionnaires. At the reference s request, questionnaires may be submitted directly to the Governments point of contact, Julie Provenzano via email at julie.provenzano@va.gov, prior to the response date. A-Es shall not incorporate by references into their response CPARS or PPQ evaluations previously submitted in response to other A-E services procurements. However, this does not preclude the Government from utilizing previously submitted PPQ information in the past performance evaluation. Submitted CPARS and PPQ evaluations will not be counted as part of any page limitation and shall be attached to the SF330, behind the SF330 Part II document (5) Location within a 300-mile radius to the design site (Brooklyn, NY) and knowledge of the location (Brooklyn, NY); provided that the application of this criterion leaves an appropriate number of qualified firms, given the nature and size of the contract, firms/teams will be evaluated on the locations of their office or offices that will be performing the work under this contract. Submission requirements: i. The A/E Firm proximity to the NY Harbor Healthcare System, Brooklyn Campus, 800 Poly Place, Brooklyn, NY 11209. ii. This distance is determined according to http://maps.google.com/ iii. This factor evaluates the distance the AE firm's design office or offices from the location of work. Please provide the address (es) and distance of your closest office to the address listed (6) Proposed design approach for this project minimizing impact to various functions of VA Submission requirements: The firm shall provide a project schedule that demonstrates the understanding of the project scope, restrictions which must be considered in the schedule, understanding of events associated with coordinating design submittals and incorporating review comments, and the capability to schedule the complete design effort within the proposed contract duration. Firms will be evaluated based on the understanding of the project scope, restrictions which must be considered in the schedule, understanding of events associated with coordinating design submittals and incorporating review comments, and the capability to schedule the complete design effort within the proposed contract duration. (7) Reputation and standing of the firm and its principal officials with respect to professional performance, general management, and cooperativeness. Submission requirements: Offerors shall provide documentation (awards, certificates, publications, commendations from within the community) as evidence of reputation and standing of its firm (8) Record of significant claims against the firm because of improper or incomplete architectural and engineering services. Offerors with substantiated claims against the firm as a result of improper architectural and engineering services provided in the last three (3) years. Submission requirements: Records and any other documentation of substantiated claims highlighting improper or incomplete architectural engineering services against the firm within the last three (3) years. The SF-330 shall contain a statement affirming that there are no records of significant claims because of improper or incomplete architectural and engineering services. (9) Specific experience and qualifications of personnel proposed for assignment to the project and their record of working together as a team. Submission requirements: Offerors shall submit evidence of individuals experience and qualifications in their respective fields. Additionally, documentation must be provided to show these individuals have worked together as a team on previous projects and their role. (Completing Sections E, F, and G, on the SF-330 meets the documentation requirement). Furthermore, offerors shall describe the ability of the firm to manage, coordinate and work effectively with team members, both internal staff and consultants. Discuss the history of working relationships with team members, including joint venture partners where applicable Evaluation Scoring Evaluation factors will be evaluated using the following adjectival ratings as follows: Outstanding: Proposal meets requirements and indicates an exceptional approach and understanding of the requirements. Strengths far outweigh any weaknesses. Risk of unsuccessful performance is very low. Good: Proposal meets requirements and indicates a thorough approach and understanding of the requirements. Proposal contains strengths which outweigh any weaknesses. Risk of unsuccessful performance is low. Acceptable: Proposal meets requirements and indicates an adequate approach and understanding of the requirements. Strengths and weaknesses are offsetting or will have little or no impact on contract performance. Risk of unsuccessful performance is moderate. Marginal: Proposal does not clearly meet requirements and has not demonstrated an adequate approach and understanding of the requirements. The proposal has one or more weaknesses which are not offset by strengths. Risk of unsuccessful performance is high. Unacceptable: Proposal does not meet requirements and contains one or more deficiencies. Proposal is not awardable. The firm s proposal demonstrates a misunderstanding of the requirement and the approach fails to meet performance standards. The firm s proposal has major omissions and inadequate details to assure evaluators that the offeror has an understanding of requirement. The ratings identified below were used in the evaluation of Past Performance (Criterion 4): Substantial Confidence: Based on the offeror s recent/relevant performance record, the Government has a high expectation that the offeror will successfully perform the required effort. No doubt exists based on the offeror s past performance that they can satisfy the requirements of the contract. Satisfactory Confidence: Based on the offeror s recent/relevant performance record, the Government has a reasonable expectation that the offeror will successfully perform the required effort. Little doubt exists based on the offeror s past performance that they could satisfy the requirements of the contract. Unknown Confidence (Neutral): No recent/relevant performance record is available or the offeror s performance record is so sparse that no meaningful confidence assessment rating can be reasonably assigned. Limited Confidence: Based on the offeror s recent/relevant performance record, the Government has little expectation that the offeror will be able to successfully perform the required effort. Some doubt exists based on past performance that they could satisfy the terms and conditions of the contract. No Confidence: Based on the offeror s recent/relevant performance record, the Government has little expectations that the offeror will be able to successfully perform the required effort. Significant doubt exists based on the offeror s past performance that they can satisfy the requirements of the contract. SELECTION INTERVIEW: Interviews shall be scheduled with firms slated as the most highly qualified. Firms slated for interviews may be asked to explain or expand on information contained in the SF-330 submittal through a formal interview or a discussion questionnaire as determined by the Contracting Officer. ESTIMATED START AND COMPLETION DATES The Department of Veterans Affairs requires design and contract support services. The estimated start and end dates for the design and start and end dates for the construction are as follows: Design: Upon Award: Completion (CDs) Start preliminary survey & study 45 Days after Notice of Award Deliver Concept Schematics 75 Days after Notice of award Select and Sign off Concept Schematic 120 Days after Notice of award Deliver 1st review material (30%) 180 Days after Notice of award Review 1st review material (30%) 195 Days after Notice of award Deliver 2nd review material (60%) 240 Days after Notice of award Review 2nd review material (60%) 255 Days after Notice of award Deliver 3rd review material (95%) 300 Days after Notice of award Review 3rd review material (95%) 315 Days after Notice of award Deliver 4th review material (100%) 360 Days after Notice of award Review 4th review material (100%) 375 Days after Notice of award Deliver Final 100% CDs issued for bid 400 Days after Notice of award Total number of days for entire design is 400 calendar days from award of contract. NOTE: The Consultant is responsible for the development of a project estimate. The project estimate shall be all inclusive (construction, engineering, legal, administrative, etc). The Consultant shall advise the Contracting Officer in writing if at any time the cost of the project is perceived to exceed the established budget. The Consultant will notify the Contracting Officer at the time it is recognized, not after the fact. LIMITATIONS VA NOTICE OF TOTAL SERVICE DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (DEC 2009) (a) Definition. For the Department of Veterans Affairs, Service Disabled Veteran-owned small business concern (1) Means a small business concern (i) Not less than 51 percent of which is owned by one or more veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; (ii) The management and daily business operations of which are controlled by one or more veterans; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; and (iv) The business has been verified for ownership and control and is so listed in the Vendor Information Pages database, (http://www.VetBiz.gov). (2) Veteran is defined in 38 U.S.C. 101(2). (b) General. (1) Offers are solicited only from veteran-owned small business concerns. All service-disabled veteran-owned small businesses are also determined to be veteran owned small businesses if they meet the criteria identified in paragraph (a)(1) of this section. Offers received from concerns that are not veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a veteran-owned small business concern. (c) Agreement. A veteran-owned small business concern agrees that in the performance of the contract, in the case of a contract for (1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other eligible veteran-owned small business concerns; (2) Supplies (other than acquisition from a non-manufacturer of the supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other eligible veteran-owned small business concerns; (3) General construction, at least 15 percent of the cost of the contract performance incurred for personnel will be spent on the concern s employees or the employees of other eligible veteran-owned small business concerns; or (4) Construction by special trade contractors, at least 25 percent of the cost of the contract performance incurred for personnel will be spent on the concern s employees or the employees of other eligible veteran-owned small business concerns. (d) A joint venture may be considered a veteran-owned small business concern if: (1) At least one member of the joint venture is a veteran-owned small business concern, and makes the following representations: That it is a veteran-owned small business concern, and that it is a small business concern under the NAICS code assigned to the procurement; (2) Each other concern is small under the size standard corresponding to the NAICS code assigned to the procurement; (3) The joint venture meets the requirements of paragraph 7 of the explanation of Affiliates in 19.101 of the Federal Acquisition Regulation; and (4) The joint venture meets the requirements of 13 CFR 125.15(b), except that the principal company may be a veteran-owned small business concern or a service-disabled veteran-owned small business concern. (e) Any veteran-owned small business concern (non-manufacturer) must meet the requirements in 19.102(f) of the Federal Acquisition Regulation to receive a benefit under. SUBMISSION REQUIREMENTS The applicable NAICS code is 541330 and the small business size is $15 Million. This acquisition for design services will be a 100% set aside for service disabled veteran owned small business concern (SDVOSB). All SDVOSBs must be verified by the Office of Small and Disadvantaged Business Utilizations Center for Veterans Enterprise (CVE) through www.vetbiz.gov before award. SDVOSB firms desiring consideration must have a working office located within 300 miles of the Brooklyn, New York city limits and be licensed in New York State. All interested SDVOSB A/E firms are invited to submit Standard Form 330, Architect Engineer Qualifications and for any consultants, on SF 330 Extra Sections E and F. Standard form 330 can be obtained at the following web site: http://www.gsa.gov/portal/forms/download/21DBF5BF7E860FC185256E13005C6AA6 . Qualified Service Disabled Veteran Owned Small Business (SDVOSB) firms responses must be received no later than 4:00 PM, EST on Friday, 11/29/2019. Electronic submission of SF330 s is preferred. The overall size of the file cannot exceed 7MB; if additional space is required, divide the file into segments with each file size less than 7MB. No more than 2 files at 7MB each will be considered. Email completed SF330 s to Julie.provenzano@va.gov Subject Line: Design Renovate Rehab Medicine, 36C242-20-R-0009 SF330. NONCOMPLIANCE WITH THIS REQUIREMENT RISKS YOUR PACKAGES AS BEING NONRESPONSIVE NOTE: Any request for assistance with submission or other procedural matters shall be submitted via email only (Julie.Provenzano@va.gov ); telephone inquiries will not be honored. THIS ANNOUNCEMENT IS NOT A REQUEST FOR PROPOSAL. THE GOVERNMENT WILL NOT PAY NOR REIMBURSE ANY COSTS ASSOCIATED WITH RESPONDING TO THIS REQUEST. THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/cc31fd97920d46f8add2d2fbf03ba040/view)
- Place of Performance
- Address: New York Harbor Healthcare System;VAMC Brooklyn;800 Poly Place;Brooklyn, NY11209USA
- Record
- SN05503380-F 20191127/191125230300 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |