Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF NOVEMBER 29, 2019 SAM #6574
SOLICITATION NOTICE

96 -- COMBINED SYNOPSIS/SOLICITATION Purchase Scrap Railroad Wheels with Shafts

Notice Date

11/27/2019 6:36:19 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

331511 — Iron Foundries
 

Contracting Office

DEPT OF COMMERCE NOAA KANSAS CITY MO 64106 USA
 

ZIP Code

64106
 

Solicitation Number

PMEL-20-00124
 

Response Due

12/4/2019 3:00:00 PM
 

Archive Date

12/05/2019
 

Point of Contact

Ben Carlson, Phone: 2065264321, Fax: 2065266815
 

E-Mail Address

ben.carlson@noaa.gov
(ben.carlson@noaa.gov)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

COMBINED SYNOPSIS/SOLICITATIONPurchase Scrap Railroad Wheels with Shafts(I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only synopsis/solicitation; proposals are being requested and a written solicitation will not be issued.(II) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ Number PMEL-20-00124(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-06.(IV) This solicitation is being issued with a total small business Set-aside. The associated NAICS code is 331511 and the PSC code is PSC 9670. (V) This combined solicitation/synopsis is for purchase of the following commercial items:Quantity of 24 Type B Railroad wheels TYPE B--Scrap railroad wheel with axel pressed out. Minimum hole diameter eight and one fourth (8-1/4") inches, with a weight of 840 pounds, +- 30 pounds.Quantity of 4 scrap railroad wheels with cut shafts as specified below.Scrap railroad wheel with shaft flame cut or better 42 inches from inside of wheel. Cut shouldbe level+/- one-half (1/2") inch. Approximate weight is 1200 - 1400 pounds. The maximumshaft diameter at cut not to exceed seven and one-half (7-1/2") inches. Axel must be flush cut onbottom to allow wheel to sit flat on a flat surface. Wheel axel shaft shall contain a drilled hole ofone and nine-sixteenths (1-9/16 ") inches diameter through the center of the shaft with the holecentered+/- one-quarter (1/4") inch, two and one-half(2-1/2 ") inches below the cut edge of the axel, and parallel to the base to the wheel. The holeshall allow for insertion of a fourteen (14") inch long, one and one-half (1-1/2") inch diametersteel rod completely through the shaft. The knuckle on the shaft shall not exceed an outsidediameter of 8".(VI) Description of requirements is as follows:Railroad wheels and shafts as describe above.(VII) Date(s) and place(s) of delivery and acceptance 12/27/2019 Shipping will be FOB Destination. (VIII) Questions must be emailed to the attention of Ben Carlson. The email address is Ben.Carlson@noaa.gov , 206-526-4321.THE FOLLOWING PROVISIONS AND ATTACHED CLAUSES APPLY TO THIS ACQUISITIONFAR 52.212-1, Instructions to Offerors -- Commercial Items applies to this acquisition. FAR 52.212-3, Offeror Representations and Certifications - Commercial ItemsCAR 1352.201-70 Contracting Officer’s AuthorityCAR 1352.209-73 Compliance with the LawsCAR 1352.209-74 Organizational Conflict of InterestCAR 1352.233-70 Agency ProtestsCAR 1352.233-71 GAO and Court of Federal Claims ProtestsCAR 1352.237-71 Security Processing Requirements - Low Risk Contracts COMBINED SYNOPSIS/SOLICITATIONPurchase Scrap Railroad Wheels with Shafts(I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only synopsis/solicitation; proposals are being requested and a written solicitation will not be issued.(II) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ Number PMEL-20-00124(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-06.(IV) This solicitation is being issued with a total small business Set-aside. The associated NAICS code is 331511 and the PSC code is PSC 9670. (V) This combined solicitation/synopsis is for purchase of the following commercial items:Quantity of 24 Type B Railroad wheels TYPE B--Scrap railroad wheel with axel pressed out. Minimum hole diameter eight and one fourth (8-1/4") inches, with a weight of 840 pounds, +- 30 pounds.Quantity of 4 scrap railroad wheels with cut shafts as specified below.Scrap railroad wheel with shaft flame cut or better 42 inches from inside of wheel. Cut shouldbe level+/- one-half (1/2") inch. Approximate weight is 1200 - 1400 pounds. The maximumshaft diameter at cut not to exceed seven and one-half (7-1/2") inches. Axel must be flush cut onbottom to allow wheel to sit flat on a flat surface. Wheel axel shaft shall contain a drilled hole ofone and nine-sixteenths (1-9/16 ") inches diameter through the center of the shaft with the holecentered+/- one-quarter (1/4") inch, two and one-half(2-1/2 ") inches below the cut edge of the axel, and parallel to the base to the wheel. The holeshall allow for insertion of a fourteen (14") inch long, one and one-half (1-1/2") inch diametersteel rod completely through the shaft. The knuckle on the shaft shall not exceed an outsidediameter of 8".(VI) Description of requirements is as follows:Railroad wheels and shafts as describe above.(VII) Date(s) and place(s) of delivery and acceptance 12/27/2019 Shipping will be FOB Destination. (VIII) Questions must be emailed to the attention of Ben Carlson. The email address is Ben.Carlson@noaa.gov , 206-526-4321.THE FOLLOWING PROVISIONS AND ATTACHED CLAUSES APPLY TO THIS ACQUISITIONFAR 52.212-1, Instructions to Offerors -- Commercial Items applies to this acquisition. FAR 52.212-3, Offeror Representations and Certifications - Commercial ItemsCAR 1352.201-70 Contracting Officer’s AuthorityCAR 1352.209-73 Compliance with the LawsCAR 1352.209-74 Organizational Conflict of InterestCAR 1352.233-70 Agency ProtestsCAR 1352.233-71 GAO and Court of Federal Claims ProtestsCAR 1352.237-71 Security Processing Requirements - Low Risk Contracts
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/80517f6968e947f79ed927f3c7c802c4/view)
 

Place of Performance

Address: 63000, WA 98115, USA

Zip Code: 98115

Country: USA
 

Record

SN05505081-F 20191129/191204040841 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |