SOURCES SOUGHT
12 -- Periscope, Armored / Tank, Abrams M-1/36A
- Notice Date
- 11/27/2019 7:23:50 AM
- Notice Type
- Sources Sought
- NAICS
- 333314
— Optical Instrument and Lens Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M920R003
- Response Due
- 12/5/2019 12:00:00 PM
- Archive Date
- 12/20/2019
- Point of Contact
- Kenneth A Pliska, Phone: 6146925373
- E-Mail Address
-
ken.pliska@dla.mil
(ken.pliska@dla.mil)
- Description
- Review the below NSN and provide us with any sources that are able to manufacture the item. Please provide the POCs for these manufacturers, if available. All of this information can be submitted to Ken Pliska at ken.pliska@dla.mil, Phone (614) 692-5373on the attached market survey form. Thank you for your time and cooperation.NSN 1240-01-390-4980Item PERISCOPE, ARMORED VEHICLETHIS NATIONAL STOCK NUMBER AND/OR ASSOCIATED DATA HASBEEN DETERMINED TO CONTAIN, UTILIZE, OR GENERATECOVERED DEFENSE INFORMATION (CDI). CDI IS UNCLASSIFIEDCONTROLLED TECHNICAL INFORMATION OR OTHER INFORMATION<(>,<)>AS DESCRIBED IN THE CONTROLLED UNCLASSIFIED INFORMATION(CUI) REGISTRY THAT REQUIRES SAFEGUARDING PURSUANT TODFARS 252.204-7012.RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENTRA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THEDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspxFOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGEACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.RQ009: INSPECTION AND ACCEPTANCE AT ORIGINRQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIESA metal casting process was identified as a means to manufacture thisitem. Tooling is required to produce a casting. For sourcing,tooling, materials or other information, please contact the appropriateassistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land& Maritime Supply Chains) DSCC.cast.forge@dla.milRQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTSThis item contains a phosphate coating requirementIAW MIL-STD-171 and MIL-DTL-16232. In lieu of therequired submittal of a preproduction phosphateprocedure the following is now required: Thecontractor responsible for the actual coatingprocedure must be certified by the PerformanceReview Institute (PRI) to the Nadcap standard forthe Phosphate chemical processes. Verification ofthis certification may be required and must besupplied upon request of the Contracting Officer.This material has specialty metal requirements IAW DFAR 252.225-7009 andDFAR 252.225-7010EXPORT CONTROL OF TECHNICAL DATA: This item has technical data some orall of which is subject to export -control of either the InternationalTraffic in Arms regulations (ITAR) or the Export AdministrationRegulations (EAR), and cannot be exported without prior authorizationfrom either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons andnationals whether located in the United States or abroad. Thisrequirement applies equally to foreign national employees and U.S.companies and their foreign subsidiaries. DFARS 252.225-7048 isapplicable to this data. ,,The Defense Logistics Agency (DLA) limits distribution of export-controlled technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical DataQuestionnaire (both are available at the web address given below), andhave been approved by the DLA controlling authority to access theexport-controlled data. Instructions for obtaining access to theexport-controlled data can be found at:https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/,,To be eligible for award, offerors and any sources of supply proposedfor use are required to have an approved JCP certification and have beenapproved by the DLA controlling authority to access export-controlleddata managed by DLA. DLA will not delay award in order for an offeroror its supplier to apply for and receive approval by the DLA controllingauthority to access the export-controlled data.RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)A QUALITY MANAGEMENT PROGRAM COMPARABLE TO ISO 9001:2008(EX. AS 9100, AS9120, AS9003/2012).RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSALREQUEST FOR VARIANCE (DEVIATION OR WAIVER)CONTRACTOR FIRST ARTICLE TEST (CFAT)IS REQUIREDSAMPLE SIZE SHALL CONSIST OF 2 PERISCOPES.THE CONTRACTOR WILL NOTIFY DCMA REPRESENTATIVES 15 DAYS PRIOR TO START OF TESTS.THE CFAT WILL BE DUE BY 120 DAYS FROM CONTRACT AWARD. A TEST REPORT IS REQUIRED AT THIS TIME FOR DCMA QAR REVIEW.THE GOVERNMENT HAS 30 DAYS TO REVIEW THE TEST RESULTS.THE SAMPLES WILL NOT BE PART OF THE PRODUCTION QUANTITY AND WILL NOT BE USED AS A MANUFACTURING STANDARD.A PRETEST REPORT IS NOT REQUIRED.THE CONTRACTOR IS REQUIRED TO PERFORM ALL OTHER TESTS AS REQUIRED BY SPECIFICATIONS ATPD-2167 AND SC-X17343D.A TEST REPORT IS REQUIRED FOR ALL UNWAIVED CFAT SOURCES.IAW BASIC DRAWING NR 19200 12548774REVISION NR M DTD 05/17/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19207 12387279REVISION NR A DTD 01/27/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 7680606REVISION NR AB DTD 04/19/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12579607REVISION NR C DTD 08/04/2009PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19207 12297953REVISION NR A DTD 01/22/2018PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548768REVISION NR A DTD 08/30/2016PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19207 12344344REVISION NR L DTD 06/30/2018PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19207 ATPD-2167REVISION NR A DTD 09/06/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19207 12285860REVISION NR E DTD 08/07/2008PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12285860REVISION NR L DTD 08/08/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 7641866REVISION NR V DTD 04/19/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19207 12285860REVISION NR G DTD 05/15/2014PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12344343REVISION NR J DTD 06/24/2015PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548779REVISION NR H DTD 08/29/2016PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19207 12344343REVISION NR M DTD 02/26/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548772REVISION NR G DTD 10/20/2016PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548773REVISION NR B DTD 09/19/2016PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12549807REVISION NR A DTD 03/28/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12549146REVISION NR A DTD 03/27/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12918300REVISION NR A DTD 06/28/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548771REVISION NR H DTD 10/20/2016PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12549136REVISION NR G DTD 03/27/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548769REVISION NR D DTD 10/20/2016PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548770REVISION NR A DTD 09/06/2016PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548774REVISION NR DTD 04/09/2018PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19207 12473000REVISION NR B DTD 06/26/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548767REVISION NR A DTD 07/14/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548774REVISION NR DTD 02/21/2002PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12549747REVISION NR B DTD 08/30/2016PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12931825REVISION NR C DTD 10/21/2016PART PIECE NUMBER:IAW REFERENCE QAP 19200 12548771REVISION NR J DTD 10/28/2015PART PIECE NUMBER:IAW REFERENCE QAP 19200 12548772REVISION NR F DTD 10/28/2015PART PIECE NUMBER:IAW REFERENCE QAP 19200 12548773REVISION NR B DTD 10/28/2015PART PIECE NUMBER:IAW REFERENCE DRAWING NR 01417 SC-X17343REVISION NR D DTD 12/09/2015PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12548769REVISION NR D DTD 03/31/2017PART PIECE NUMBER:IAW REFERENCE DRAWING NR 19200 12285860REVISION NR D DTD 04/18/2002PART PIECE NUMBER:
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/9c36326046c34280821f4f1cbd870862/view)
- Place of Performance
- Address: OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN05505135-F 20191129/191204040842 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |