SOLICITATION NOTICE
93 -- Lower Granite Turbine Blade Packing Seals
- Notice Date
- 12/18/2019 3:15:18 PM
- Notice Type
- Presolicitation
- NAICS
- 339991
— Gasket, Packing, and Sealing Device Manufacturing
- Contracting Office
- US ARMY ENGINEER DISTRICT WALLA WAL WALLA WALLA WA 99362 USA
- ZIP Code
- 99362
- Solicitation Number
- W912EF20Q0018
- Response Due
- 1/3/2020 2:00:00 PM
- Archive Date
- 01/18/2020
- Point of Contact
- Alan Inglis, Phone: 5095277217, Brooke Moore, Phone: 5095277913
- E-Mail Address
-
alan.n.inglis@usace.army.mil, brooke.n.moore@usace.army.mil
(alan.n.inglis@usace.army.mil, brooke.n.moore@usace.army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The US Army Corps of Engineers, Walla Walla District is issuing a solicitation for the purchase of a Turbine Blade Packing Seals, commercial supplies, prepared in accordance with Federal Acquisition Regulation 12.6. The NAICS code applicable to this acquisition is 339991, with a Small Business Size Standard of 500 employees as determined by 13 CFR 121.104. Competition for this requirement is Set-Aside for small business. Offers received from other than small business offerors will not be considered. When available, the solicitation documents for this project W912EF-20-Q-0018 will be provided via Beta.SAM https://www.beta.sam.gov on or around 20 December 2019. Please do not submit a quote without the solicitation package that will be provided to industry by the Government as specified above. The solicitation will be a Request for Quote (RFQ). The official quotation due date will be contained in the solicitation and any solicitation amendments that may be issued. SCOPE OF WORK The contractor shall furnish fourteen (14) sets of seals which will be installed by the Government at Lower Granite Lock and Dam. Seven (7) sets shall be for Baldwin-Lima-Hamilton (B-L-H) turbines and the remaining seven (7) sets for Allis-Chalmers (A-C) turbines.� Packing shall be packaged and delivered to Lower Granite Lock and Dam as described in Paragraph 7.0. The packing shall be Back-to-Back, V-Pack split hydraulic turbine blade packing style, consisting of a five (5) ring set designed to positively seal an oil-water interface between the blade trunnion sleeve and the turbine runner packing box. The packing shall be a direct replacement to OEM packing, requiring no changes to fit, form, or function of the packing box or follower. A packing set is defined as the assembly of the five (5) rings necessary to completely seal one (1) turbine blade.� Six (6) sets are required per turbine runner and one (1) additional set will be supplied as a spare.� The packing shall be individually molded, press cured in endless form and diamond spilt after curing.� Material type shall be NBR (Buna-N) Rubber; fabric reinforced rings shall not be used.� Packing shall be constructed to fit the following packing box dimensions; units are in inches: �B-L-H Turbine Blade Packing (Units 1-3) � Seven (7) Sets Packing Box Bore:����������������������������� ��������������� 53.500� +0.015/-0.000 Blade Shaft Diameter:���������������������� ��������������� 51.500� +0.004/-0.004 Compressed Stack Height:������������������������������� ��������������� 3.875��� +0.005/-0.005 A-C Turbine Blade Packing (Units 4-6) � Seven (7) Sets Packing Box Bore, in:������������������������ ��������������� 53.250 +0.002/-0.000 Shaft Diameter, in:����������������������������� ��������������� 52.000 +0.000/-0.005 Compressed Stack Height, in:���������� ��������������� 2.250�� +0.005/-0.005 Material Hardness: Male Adapters/Header Rings:������������������������� 80 +5/-0 Durometer Chevron/Vee Rings:��������������������������� ��������������� 70 +5/-0 Durometer Back-to-Back Female Adapter Ring:��� 70 +5/-0 Durometer The Contractor shall be required to provide drawings of the packing sets. The drawings shall include construction material, dimensions, specifications, installation procedures, vendor�s name and phone number and a drawing number.� If available, the drawings shall be provided in electronic format as a Microstation .dgn or AutoCAD .dwg, otherwise .PDF or .TIF files are acceptable. Important Note: the Beta.SAM response date listed elsewhere in this synopsis is for Beta.SAM archive purposes only. It does not necessarily reflect the actual due date that the RFQ is due.� NO CD's OR HARD COPIES WILL BE AVAILABLE. Offeror's are responsible for checking the reference page for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the document posted at the referenced website. To obtain automatic notifications of updates to this solicitation, you MUST log in to Beta.SAM.gov and add the solicitation to your Watchlist. If you would like to list your firm so others can see you are an interested vendor, you must click the quote mark Add Me to Interested Vendors button in the listing for this solicitation on Beta.SAM.gov. All quotes received by the closing date that are small businesses will be considered by the Government. To be eligible for contract award, offerors must be registered in the System for Award Management (SAM). Register via the SAM website at https://www.sam.gov or contact SAM Customer Service at 866-606-8220. Offerors must also complete Offeror Representations and Certifications on-line at https://www.sam.gov.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/252c4071816545c490ead844b3142f06/view)
- Place of Performance
- Address: Pomeroy, WA 99347, USA
- Zip Code: 99347
- Country: USA
- Zip Code: 99347
- Record
- SN05520635-F 20191220/191218230141 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |