SOURCES SOUGHT
99 -- 3D Printing and Scanning Equipment
- Notice Date
- 12/18/2019 8:12:51 AM
- Notice Type
- Sources Sought
- NAICS
- 333249
— Other Industrial Machinery Manufacturing
- Contracting Office
- W0LX ANNISTON DEPOT PROP DIV ANNISTON AL 36201-4199 USA
- ZIP Code
- 36201-4199
- Solicitation Number
- W911KF-20-S-0006
- Response Due
- 12/31/2019 8:00:00 AM
- Archive Date
- 01/15/2020
- Point of Contact
- Katherine B. Fuller, Phone: 2562356687
- E-Mail Address
-
katherine.b.fuller2.civ@mail.mil
(katherine.b.fuller2.civ@mail.mil)
- Description
- This Sources Sought Notice is for market research purposes only. This is NOT a request for quotes or proposals. Summary of Services: This specification establishes a requirement for one (1) 3D Atomic Diffusion Additive Manufacturing (ADAM) Printer with de-binder, one (1) 3D Continuous Fiber Reinforced Non-metal Printer, one (1) Handheld self-positioning laser scanner, and one (1) furnace located on Anniston Army Depot (ANAD), Anniston, Alabama. Salient Characteristics: 3D Atomic Diffusion Additive Manufacturing (ADAM) Printer with De-Binder � The system shall print metal powder bound in polymer and sinter into a full-density metal part. The system shall have the ability to support overhangs by metal structure, physically separated with ceramic interface. The system shall have a continuous wash system to allow maximum throughput- allow users to add and remove parts at any point in the cycle. The system shall utilize supports that are removable by hand after sintering. The system shall utilize bound metal powder with minimal Environment Health & Safety (EHS) requirements. The system shall run 100% disconnected from the internet, including slicing software. The system shall use commoditized wash solvent for ease of access and must be validated as safe by 3rd parties. Vendor software shall be compatible with Windows 10 Secure Host Baseline Army (SHB-A). Software shall be compatible with Solid Works. � Fiber Reinforced Non-Metal Printer � The system shall have the ability to produce composite parts meeting or exceeding 700MPA (megapascal) tensile strength. Shall have the capability to do Continuous Filament Fabrication (CFF) (*Note: Continuous Filament Fabrication is an augmented Fused Filament Fabrication (FFF) process that works in addition to an FFF printer to lay continuous fiber in a part. In this process, a printer utilizes a second nozzle to lay continuous strands of composite fibers inside conventional FFF thermoplastic parts.). The system shall offer these continuous fibers: Carbon Fiber, Kevlar, Fiberglass and High Strength, High Temperature Fiberglass. Shall have a physical footprint no larger than 24� (width) x 24� (depth). Shall have the ability to print break-away supports that do not require a separate wash station process. The system shall have built in laser micrometer calibration to ensure repeatability across builds. The system shall run on a unibody chassis to ensure print stability. In addition to the features listed above the vendor shall supply the following: 800cm3 Onyx filament Spool 150cm3 Carbon Fiber CFF Spool 150cm3 Kevlar CFF Spool The system shall run 100% disconnected from the internet. Vendor software shall be compatible with Windows 10 Secure Host Baseline Army (SHB-A). Software shall be compatible with Solid Works. � Handheld Self-Positioning Laser Scanner Shall be able to scan chrome or other reflective surfaces without the use of a glare reduction coating on the part. The handheld 3D scanner shall be a stand-alone device that does not require a tripod nor any external tracking device to operate. Scanner and all associated equipment shall be easily packed and transported and be capable of performing to the standards set forth herein under less than ideal conditions. Scanner shall be capable of being set up and operating in under 5 minutes. The system shall run 100% disconnected from the internet. Vendor software shall be compatible with Windows 10 Secure Host Baseline Army (SHB-A). Software shall be compatible with Solid Works. � Furnace � External Dimensions: 42 x 20 x 28 in NTE High Purity Refractory Carbon-free Retort Peak Temperature: 2372� F Sintering Capacity: 5.55� ID x 12� L Ceramic sintering surface Power Requirement: 208 Single Phase 36A The Anniston Army Depot is seeking responses from all responsible sources, including large, and small business concerns. Small business concerns are defined under the associated North American Industry Classification (NAICS) code for this 333249 - Other Industrial Machinery Manufacturing: Size Standard is 500 employees. Please include your company's size classification and socio-economic status in any response to this notice. Responses to this notice must be submitted electronically to Katherine Fuller, katherine.b.fuller2.civ@mail.mil, (telephone inquiries will not be accepted or acknowledged). �3D PRINTING AND SCANNING EQUIPMENT� must appear in the subject line of the email or it will be deleted and not read. Responses must be received no later than 31 December 2019 at 10:00 A.M. CDT. Interested vendors are requested to submit a statement of the capabilities of their organization with respect to the government�s Request for Information. Responses should include: 1. Prospective firm's name, address, phone number, socioeconomic status and DUNS number 2. General information of firm's previous experience on at least two projects of a similar scope, complexity and value; including the title, location, brief description of work, and dollar value Responses should be ""short and to-the-point."" This Request for Information (RFI) is issued for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. The Government is under no obligation to issue a solicitation or to award a contract related to this project. NO FURTHER INFORMATION IS AVAILABLE AT THIS TIME. THIS RFI IS FOR MARKET RESEARCH ONLY. This RFI will expire on 31 December 2019 at 10:00 A.M. CDT.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/781f350cd44b4c62a4c73797b19afa81/view)
- Place of Performance
- Address: Anniston, AL 36201, USA
- Zip Code: 36201
- Country: USA
- Zip Code: 36201
- Record
- SN05520787-F 20191220/191218230142 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |