SOLICITATION NOTICE
H -- Inspect Hangar 7 & 8 Door Welds
- Notice Date
- 1/24/2020 11:13:06 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 541990
— All Other Professional, Scientific, and Technical Services
- Contracting Office
- W7NR USPFO ACTIVITY NYANG 109 SCOTIA NY 12302-9572 USA
- ZIP Code
- 12302-9572
- Solicitation Number
- W50S8J20R0004
- Response Due
- 1/28/2020 12:00:00 PM
- Archive Date
- 02/12/2020
- Point of Contact
- Wanda D. Yarbor, Phone: 5183442477, NICHOLAS B. BASTAINI, Phone: 5183442513
- E-Mail Address
-
wanda.d.yarbor.mil@mail.mil, nicholas.b.bastiani.mil@mail.mil
(wanda.d.yarbor.mil@mail.mil, nicholas.b.bastiani.mil@mail.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The purpose of this update is to answer the following questions which were brought up during the site visit: Q1:� Are there photographs of the doors available? A1:� Please see attached Photo 1 and Photo 2. Q2:� Do you have the model number of the doors? A2:� Please see Attachment B.� It has information on the model number of the Megadoor, as well as the fabric overlay.� Q3:� Do you have construction plans for the doors? A3:� Please see Attachment C Q4:� Are there any site specific safety procedures that are required to prop the door during inspection? A4:� At this time, plans should be made to isolate the area of work to prevent travel beneath the door.� The door should NOT be propped, for it can damage the door.� Inspections should be completed from a position other than beneath the door.� Additional safety requirements may be requested at the pre-construction meeting.� It is the responsibility of the contractor to supply any lifts, or other equipment necessary to perform the specified inspection. -END UPDATE- The 109th Airlift Wing, located in Scotia, NY requires a certified welding inspector to perform weld inspection services in accordance with American Welding Society AWS D1.1:2015, Structural Welding Code � Steel, Chapter 6, on two aircraft hangars.� Each hangar has a 3-part door. �Scope: �The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary to perform Weld Inspection Services, as defined in this PWS Background: �The ANG recently had welds fail on a vertical lift fabric hangar door structural members and is requiring an assessment of all welds on door-bottom beams for all vertical lift fabric hangar doors.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/66e871934e7d4807b0c7f47a4ad2c4fe/view)
- Place of Performance
- Address: Schenectady, NY 12302, USA
- Zip Code: 12302
- Country: USA
- Zip Code: 12302
- Record
- SN05542898-F 20200126/200124230145 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |