Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF FEBRUARY 05, 2020 SAM #6642
SOLICITATION NOTICE

J -- CGC ALEX HALEY HEATED WINDOWS

Notice Date
2/3/2020 11:10:40 AM
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
336611 — Ship Building and Repairing
 
Contracting Office
SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
 
ZIP Code
94501
 
Solicitation Number
70Z08520QP4530000
 
Response Due
2/10/2020 7:00:00 AM
 
Archive Date
02/25/2020
 
Point of Contact
Anthony J. Andaluz, Phone: 5106375980, Nicholas A Pryor, Phone: 5106375934
 
E-Mail Address
anthony.j.andaluz@uscg.mil, nicholas.a.pryor@uscg.mil
(anthony.j.andaluz@uscg.mil, nicholas.a.pryor@uscg.mil)
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Request for Quotations number is 70Z085-20-Q-P4530000 and is issued as a request for quotations (RFQ). This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-65 dated January 29, 2013. The NAICS Code is 336611. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. The United States Coast Guard Surface Force Logistics Center has a requirement for the following: �Requirements for Heated Bridge Windows on USCGC ALEX HALEY: 1. CC-1226 STYLE FIXED HEATED WINDOW FOR 26-3/8 X 20-3/8 PLATE CUTOUT STAINLESS STEEL FRAME, �� THICK GLASS, CC-1595 WINDOW CONTROLLER WITH CC-1590 JUNCTION BOX � QTY 11 2. CC-1226 STYLE FIXED HEATED WINDOW FOR 26-3/8 X 20-3/8 PLATE CUTOUT STAINLESS STEEL FRAME, �� THICK GLASS, CC-1650 WINDOW CONTROLLER � QTY 3 3. CC-1226 STYLE FIXED HEATED WINDOW FOR 26-3/4 X 20-3/4 PLATE CUTOUT STAINLESS STEEL FRAME, �� THICK GLASS, CC-1595 WINDOW CONTROLLER WITH CC-1590 JUNCTION BOX � QTY 2 4. CC-1226 STYLE FIXED HEATED WINDOW FOR 20-3/8 X 20-3/8 PLATE CUTOUT STAINLESS STEEL FRAME, �� THICK GLASS, CC-1595 WINDOW CONTROLLER WITH CC-1590 JUNCTION BOX � QTY 3 5. CC-1226 STYLE FIXED HEATED WINDOW FOR 20-3/8 X 20-3/8 PLATE CUTOUT STAINLESS STEEL FRAME, �� THICK GLASS, CC-1650 WINDOW CONTROLLER � QTY 3 The window sizes shall be in accordance with the plate cutout dimensions above. The frames shall be inside mounted with a watertight bolted flange. All frames mount into a 3/16� thick steel bulkhead (ship�s superstructure), with the exception of five windows in the front which mount into 3/16� thick aluminum. All window angles shall be 90 degrees. Frames shall have mitered corners and shall not be pre-drilled. Frames shall be designed to prevent water which may accumulate in the frame from entering the compartment. Glazings shall be of UV resistant Neoprene Rubber. Non-icing windows, shall be electrically heated via the laminate between the glass. Windows shall have attached junction box and a remote thermostatic solid state control box. The heated window glass and all controls shall operate on 440 VAC, 60 Hz, single phase current. The window shall be capable of maintaining clear vision under icing and fogging conditions down to minus 20 degrees F with a 40 knot wind and an ice accumulation rate of six inches per hour. The junction box shall be mechanically attached to the frame in the top left corner when viewed from the inside. The junction box and the remote operated control box shall both be furnished with mating connectors. The electrically heated laminated glass unit (1/2� thick) shall be made up of two 1/4� thick heat treated, tempered safety glass panels sandwiching a plastic heating film. The heated glass and its method of control shall be IAW NAVSEA Dwg 804-2226902 and MILSPEC MIL-W-18445. Window frames will be drilled upon installation and installed using truss head stainless steel (type 316) machine screws. The frame shall be set in non-corrosive silicon sealant. Dow corning 748 or Eq. INTERESTED VENDORS PLEASE SUBMIT AN OFFICIAL QUOTE WITH A SAM.GOV REGISTERED DUNS NUMBER AND EMAIL TO ANTHONY.J.ANDALUZ@USCG.MIL
 
Web Link
SAM.gov Permalink
(https://beta.sam.gov/opp/91202bf48a8e4ce2b151f0f7825536ca/view)
 
Place of Performance
Address: Kodiak, AK 99619, USA
Zip Code: 99619
Country: USA
 
Record
SN05550116-F 20200205/200203230142 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.