SOLICITATION NOTICE
61 -- Power Supply and Inverter
- Notice Date
- 3/16/2020 5:50:10 AM
- Notice Type
- Presolicitation
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7LX-20-R-0104
- Response Due
- 4/7/2020 8:59:00 PM
- Archive Date
- 04/22/2020
- Point of Contact
- Robert Varcho, Phone: 6146921372
- E-Mail Address
-
robert.varcho@dla.mil
(robert.varcho@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 6130-00-444-2809 ���� POWER SUPPLY ���� ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RD002 ���� ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ001 ���� REFERENCE NUMBER:RQ002 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:E0115 ��� �CRITICAL APPLICATION ITEM ���� BEHLMAN ELECTRONICS, INC. DBA 12868 P/N 374557-2 ���� SC ELECTRONICS INC 0YGA2 P/N 374557-2 ���� PREP FOR DELIVERY ���� LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. CLIN 0002: NSN:6130-01-223-5716 ���� POWER SUPPLY ���� ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RD002 ���� ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:A0003 ���� REFERENCE NUMBER:CA060 ���� REFERENCE NUMBER:ZD025 ���� SC ELECTRONICS INC 0YGA2 P/N 13083229-1 ���� LOCKHEED MARTIN CORPORATION DBA 04939 P/N 13083229 ���� PREP FOR DELIVERY ���� LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:10� CLNG/DRY:1� PRESV MAT:00 ���� WRAP MAT:XX� CUSH/DUNN MAT:XX� CUSH/DUNN THKNESS:D ���� UNIT CONT:E5� OPI:O ���� INTRMDTE CONT:E5� INTRMDTE CONT QTY:AAA ���� PACK CODE = E: PACKING LEVEL = B: ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:00 -00 No special marking ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 CLIN 0003: NSN:6130-01-621-3718 ���� INVERTER,POWER,STATIC ���� ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:ZD080 ���� REFERENCE NUMBER:CA060 ���� REFERENCE NUMBER:ZD025 ���� SC ELECTRONICS INC 0YGA2 P/N SCE825 ���� PREP FOR DELIVERY ���� LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ************************************************************************************* � GLOSSARY � ************************************************************************************* PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ���� All DLA Master List of Technical and Quality Requirements take ���� precedence over ASTM D3951. ���� Mark and label all packaging and packing in accordance with MIL-STD-129. ���� The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as � ���specified in the contract/purchase order. ITEM DESCRIPTION TEXT ���� REFERENCE NUMBER RP001 ���� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER RD002 ���� RD002, COVERED DEFENSE INFORMATION APPLIES ���� REFERENCE NUMBER RA001 ���� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� REFERENCE NUMBER RQ001 ���� RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND ���� NON-MANUFACTURERS) ���� REFERENCE NUMBER RQ002 ���� RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) ���� REFERENCE NUMBER RQ011 ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� REFERENCE NUMBER E0115 ���� NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION. ���� REFERENCE NUMBER A0003 ���� MIL-STD-130N(1) DATED 16 NOV 2012. ���� IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY ���� REFERENCE NUMBER CA060 ���� NO DATA IS AVAILABLE.� THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION. ���� REFERENCE NUMBER ZD025 ���� MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL ���� NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT ���� CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED ���� UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY ���� USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED ���� INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; ���� AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. ���� PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS ���� CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN ���� A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR ���� MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ���� REFERENCE NUMBER ZD080 ���� SAMPLING: ���� THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ ���� H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE ���� SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, ���� STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR ���� AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF ���� VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ���� ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE ���� SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER ���� MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR ���� PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT ���� SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT ���� UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/705b4a261083460bac3088ee4bb9ca96/view)
- Record
- SN05590417-F 20200318/200316230148 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |