SOURCES SOUGHT
34 -- Sources Sought for one (1) each Computer Numerical Control (CNC) Lathe
- Notice Date
- 5/11/2020 9:30:24 AM
- Notice Type
- Sources Sought
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX20Q0107
- Response Due
- 5/15/2020 12:00:00 PM
- Archive Date
- 05/30/2020
- Point of Contact
- Jessica R. Camunez, Phone: 5756788283
- E-Mail Address
-
jessica.r.camunez.civ@mail.mil
(jessica.r.camunez.civ@mail.mil)
- Description
- A. Objective:� To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation. B. The Government requires one (1) each small-footprint, fully-automated, Computer Numerical Control (CNC) lathe that meets the following minimum specifications: �Note:� All dimensions, specifications are given in a range format in which the operating characteristics of the machine must fall. Physical Characteristics Work Area � General Requirements Distance Between Centers � Range of 15� to 25� Height of Centers � Range of 4� to 6� Swing Over Bed � Range of 8� to 12� Travel of Cross-Slide � 4� to 8� Travel of Top-Slide - .1� to 1� Top-Slide Rotation - 360� Headstock Spindle Through Hole � Range of 1� to 2.5� Rotational Accuracy � No greater than 0.0005� (or angular equivalent) Unsupported Cylindrical Turning @ 100mm � No greater than 0.0005� Motor/Power Requirements Voltage � 110V, 50/60Hz is preferred.� 208-230V, 50/60Hz will be considered as long as machine can run through a transformer to 110V. Power Consumption � Minimum 1HP, Maximum 3.5HP (Machines in this power range shall fall in our physical footprint requirements, higher HP machines will be too large for our lab space.) Spindle Speed Operating Range �Between 25 and 60,000 rpm.� Speeds shall be infinitely variable within this range. Feed Requirements Automatic Feed Rate � Between 0.0020 and 0.0075 inches/revolution. X and Z Axis Path Feed Rate � Between 0.01� and 100 inches per minute. Ball Screw Precision Accuracy - +/- 0.0010� or better. Manual Thread-Cutting Range � Between 7 and 44 TPI (threads per inch). Thread-Cutting Programmability Required Tailstock Requirements Spindle Travel Distance � Range of 1.5� to 4�. Lateral Displacement - +/- 0.050� or better Controller Requirements Stand-alone PC with touchscreen monitor, or integrated Siemens 808 type controller or equivalent. Machine Footprint Width � Between 48� and 84� Depth � Between 24� and 44� Height � Between 18� and 84� Weight � Maximum of 1,500 lbs. Additional Characteristics Chuck Size � 3� to 6� Diameter 3-Jaw Chuck Coolant � Through-the-spindle (TTS) is optimal, but conventional coolant capability is acceptable C. Responses:� All interested parties should notify this office via e-mail within the posted date.� Responses shall include: I. To what extent each of the specifications can be met. II.� Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 500 people standard that accompanies NAICS code 333517. If a small business, you must also list any small disadvantaged status you hold [HUB Zone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.]. III. experience/ performance through the description of completed projects. �Responses to this sources sought are due no later than 12:00pm eastern standard time 05/15/2020. Submissions should be emailed to Brianna Murphy at Brianna.murphy.ctr@mail.mil. Questions concerning this sources sought may be directed to Brianna Murphy at brianna.murphy.ctr@mail.mil. Please be advised that .zip and .exe files cannot be accepted.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/a26aa59848824bb698324031c4903ae4/view)
- Place of Performance
- Address: Aberdeen Proving Ground, MD, USA
- Country: USA
- Country: USA
- Record
- SN05653750-F 20200513/200511230213 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |