SAMDaily.us | PRESOL | 28 | Re-Manufactured Caterpillar Diesel Engine

SAMDAILY.US - ISSUE OF MAY 17, 2020 SAM #6744
SOLICITATION NOTICE

28 -- Re-Manufactured Caterpillar Diesel Engine

Notice Date: 5/15/2020 6:35:38 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 333618 — Other Engine Equipment Manufacturing
Contracting Office: W7NG USPFO ACTIVITY MNANG 133 SAINT PAUL MN 55111-4112 USA
ZIP Code: 55111-4112
Solicitation Number: W50S7E20Q5006
Response Due: 5/28/2020 1:30:00 PM
Archive Date: 06/12/2020
Point of Contact: Mikkael R. Hahn, Phone: 6127132613
E-Mail Address: mikkael.r.hahn.mil@mail.mil
(mikkael.r.hahn.mil@mail.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement is being issued as a request for quotation (RFQ) and constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2020-06. This combined synopsis/solicitation is a cascading set-aside 100% for small business. North American Industrial Classification Standard 333618 applies to this solicitation; business size standard is 1,500 employees. The Contracting Officer reserves the right to award under a different NAICS if the company would qualify as a small business under the solicited NAICS. The following is needed: �1 Each� -Re-Manufactured Caterpillar Brand Diesel Engine,� Model # C18 Brand Name Only See attached SOW ****Quotation instructions**** Evaluation: The Government plans to award a contract resulting from this solicitation to the offer conforming to the solicitation which will be most advantageous to the Government. Quotes will be evaluated on best value using price, delivery time, and past performance (see 52.212-2 provision). All solicitation specifications are not absolute and the 133AW will consider innovative solutions to this requirement. Quotes may be comparatively evaluated in compliance with FAR 13.106-2 (b) (3). Quote Instructions: Multiple solutions to the requirement should be offered as alternative quotes and will be evaluated as separate offers. Multiple solutions are encouraged. Innovative solutions are encouraged and will be evaluated in accordance with the intent of this requirement. Standing quotes may be considered as responsive if in the best interest of the government. GOVERNMENT INTENDS TO ISSUE ONE (1) CONTRACT BUT RESERVES THE RIGHT TO CONSIDER PARTIAL OR MULTIPLE AWARDS. If not already registered in SAM, go to https://beta.sam.gov/ to register prior to submitting quote. Quotes are due in this office no later than 28 May 2020 @ 3:30 PM (CST).� Offeror MUST provide Tax ID and CAGE Code and DUN's# with proposal.� All questions and quotes must be directed to the 133AW Contracting Officer via email at mikkael.r.hahn.mil@mail.mil. Questions asked within 2 days of solicitation close will be answered at the discretion of the Contracting Officer. Emailed quotes are preferred. Late quotes may be rejected at the Contracting Officer�s discretion. Electronic Documents: All electronic documents must NOT be �secured�, �locked�, or otherwise inaccessible. Submitter risks rejection if documents prove inhospitable to viewing and evaluation. Utilize standard Microsoft or Adobe formats, and net file size of all documents should be less than 10MB. ****Clauses and Provisions**** FAR 52.204-7 SYTEM FOR AWARD MANAGEMENT (OCT 2016) FAR 52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2017) FAR 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (OCT 2016) FAR 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016) FAR 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016) FAR 52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) FAR 52.204-22 ALTERNATE LINE ITEM PROPOSAL (JAN 2017) FAR 52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED ENTITIES (JUL 2018) FAR 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (DEC 2019) FAR 52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (AUG 2019) FAR 52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS (NOV 2015) FAR 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (JAN 2017) FAR 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS -- ALTERNATE I (OCT 2014) FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (JAN 2017) FAR 52.212-5 (Deviation) CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2017) FAR 52.219-3 NOTICE OF SET-ASIDE OF ORDERS (MAR 2020) FAR 52.219-4 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZONE SMALL BUSINESS CONCERNS (MAR 2020) FAR 52.219-4 ALT 1 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZONE SMALL BUSINESS CONCERNS (MAR 2020) FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2011) FAR 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013) FAR 52.222-3 CONVICT LABOR (JUNE 2003) FAR 52.222-19 CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (OCT 2016) FAR 52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015) FAR 52.222-26 EQUAL OPPORTUNITY (SEP 2016) FAR 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (FEB 2016) FAR 52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) FAR 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) FAR 52.225-25 PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN CERTAIN ACTIVITIES OR TRANSACTIONS RELATING TO IRAN--REPRESENTATION AND CERTIFICATIONS (OCT 2015) FAR 52.222-50 COMBATING TRAFFICKING IN PERSONS (JAN 2019) (22 U.S.C. CHAPTER 78 AND E.O. 13627) FAR 52.232-29 TERMS FOR FINANCING OF PURCHASES OF COMMERCIAL ITEMS (FEB 2002) FAR 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER�SYSTEM FOR AWARD MANAGEMENT (OCT 2018) FAR 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) FAR 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013) FAR 52.233-1 DISPUTS (MAY 2014) FAR 52.233-3 PROTEST AFTER AWARD (AUG 1996) DFARS 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) DFARS 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) DFARS 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) DFARS 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) DFARS 252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) DFARS 252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) DFARS 252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT INFORMATION (OCT 2016) DFARS 252.204-7011 ALTERNATIVE LINE-ITEM STRUCTURE (SEP 2011) DFARS 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) DFARS 252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT (MAY 2016) DFARS 252.204-7016 COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES�REPRESENTATION (DEC 2019) DFARS 252.204-7017 PROHIBITION ON THE ACQUISITON OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES�REPRESENTATION (DEC 2019) DFARS 252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES (DEC 2019) DFARS 252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013) DFARS 252.213-7000 NOTICE TO PROSPECTIVE SUPPLIERS ON USE OF PAST PERFORMANCE INFORMATION RETRIEVAL SYSTEM--STATISTICAL REPORTING IN PAST PERFORMANCE EVALUATIONS (JUN 2015) DFARS 252.225-7000 BUY AMERICAN�BALANCE OF PAYMENTS PROGRAM CERTIFICATE BASIC (NOV 2014) (NOV 2014) DFARS 252.225-7001 BUY AMERICAN ACT AND BALANCE OF PAYMENTS PROGRAM (JAN 2009) DFARS 252.225-7031 SECONDARY ARAB BOYCOTT OF ISREAL (JUN 2005) DFARS 252.225-7035 BUY AMERICAN�FREE TRADE AGREEMENTS�BALANCE OF PAYMENTS PROGRAM CERTIFICATE�BASIC (NOV 2014) DFARS 252.225-7036 ALT I BUY AMERICAN�FREE TRADE AGREEMENTS�BALANCE OF PAYMENTS PROGRAM�BASIC (DEC 2017) DFARS 252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) DFARS 252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) DFARS 252.237-7010 PROHIBITION ON INTERROGATION OF DETAINEES BY CONTRACTOR PERSONNEL-JUN 2013 DFARS 252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) DFARS 252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA--BASIC (APR 2014) 52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Best value using price, delivery time, and past performance �(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept (End of provision) 52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS--REPRESENTATION (JAN 2017) (a) Definition. As used in this provision-- Internal confidentiality agreement or statement, subcontract, and subcontractor, are defined in the clause at 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. (b) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions), Government agencies are not permitted to use funds appropriated (or otherwise made available) for contracts with an entity that requires employees or subcontractors of such entity seeking to report waste, fraud, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (c) The prohibition in paragraph (b) of this provision does not contravene requirements applicable to Standard Form 312, (Classified Information Nondisclosure Agreement), Form 4414 (Sensitive Compartmented Information Nondisclosure Agreement), or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d) Representation. By submission of its offer, the Offeror represents that it will not require its employees or subcontractors to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or subcontractors from lawfully reporting waste, fraud, or abuse related to the performance of a Government contract to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information (e.g., agency Office of the Inspector General). (End of provision) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://acquisition.gov� (End of clause) 252.211-7003 Item Unique Identification and Valuation. As prescribed in 211.274-6(a)(1), use the following clause: ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016) �� (a)� Definitions.� As used in this clause� �� Automatic identification device� means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. �� Concatenated unique item identifier� means� �� (1)� For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or �� (2)� For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. �� Data matrix� means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. �� Data qualifier� means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. �� DoD recognized unique identification equivalent� means a unique identification method that is in commercial use and has been recognized by DoD.� All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. �� DoD item unique identification� means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. �� Enterprise� means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. �� Enterprise identifier� means a code that is uniquely assigned to an enterprise by an issuing agency. �� Government�s unit acquisition cost� means� �� (1)� For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; �� (2)� For cost-type or undefinitized line, subline, or exhibit line items, the Contractor�s estimated fully burdened unit cost to the Government at the time of delivery; and �� (3)� For items produced under a time-and-materials contract, the Contractor�s estimated fully burdened unit cost to the Government at the time of delivery. �� Issuing agency� means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459. �� Issuing agency code� means a code that designates the registration (or controlling) authority for the enterprise identifier. �� Item� means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. �� Lot or batch number� means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. �� Machine-readable� means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. �� Original part number� means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. �� Parent item� means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. �� Serial number within the enterprise identifier� means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. �� Serial number within the part, lot, or batch number� means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. �� Serialization within the enterprise identifier� means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again.� The enterprise is responsible for ensuring unique serialization within the enterprise identifier. �� Serialization within the part, lot, or batch number� means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.� The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. �� Type designation� means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. �� Unique item identifier� means a set of data elements marked on items that is globally unique and unambiguous.� The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. �� Unique item identifier type� means a designator to indicate which method of uniquely identifying a part has been used.� The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. �� (b)� The Contractor shall deliver all items under a contract line, subline, or exhibit line item. �� (c)� Unique item identifier. �� (1)� The Contractor shall provide a unique item identifier for the following: �� (i)� Delivered items for which the Government�s unit acquisition cost is $5,000 or more, except for the following line items:�� Contract Line, Subline, or�� Exhibit Line Item Number�� Item Description �_0001_____________________________________CAT Engine C18____________ ___________________________________________________________________ ___________________________________________________________________ �� (ii)� Items for which the Government�s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or�� Exhibit Line Item Number�� Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (If items are identified in the Schedule, insert �See Schedule in this table.) �� (iii)� Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____. �� (iv)� Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____. �� (v)� Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. �� (2)� The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. �� (3)� The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology � International symbology specification � Data matrix; ECC200 data matrix specification. �� (4)� Data syntax and semantics of unique item identifiers.� The Contractor shall ensure that� �� (i)� The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: �� (A)� Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology � EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. �� (B)� Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology � EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. �� (C)� Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and �� (ii)� The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology � Transfer Syntax for High Capacity Automatic Data Capture Media. �� (5)� Unique item identifier. �� (i)� The Contractor shall� �� (A)� Determine whether to� �� (1)� Serialize within the enterprise identifier; �� (2)� Serialize within the part, lot, or batch number; or �� (3)� Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and �� (B)� Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; �� (C)� Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and �� (D)� Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. �� (ii)� The issuing agency code� �� (A)� Shall not be placed on the item; and �� (B)� Shall be derived from the data qualifier for the enterprise identifier. �� (d)� For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: �� (1)� Unique item identifier. �� (2)� Unique item identifier type. �� (3)� Issuing agency code (if concatenated unique item identifier is used). �� (4)� Enterprise identifier (if concatenated unique item identifier is used). �� (5)� Original part number (if there is serialization within the original part number). �� (6)� Lot or batch number (if there is serialization within the lot or batch number). �� (7)� Current part number (optional and only if not the same as the original part number). �� (8)� Current part number effective date (optional and only if current part number is used). �� (9)� Serial number (if concatenated unique item identifier is used). �� (10)� Government�s unit acquisition cost. �� (11)� Unit of measure. �� (12)� Type designation of the item as specified in the contract schedule, if any. �� (13)� Whether the item is an item of Special Tooling or Special Test Equipment. �� (14)� Whether the item is covered by a warranty. �� (e)� For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: �� (1)� Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. �� (2)� Unique item identifier of the embedded subassembly, component, or part. �� (3)� Unique item identifier type.** �� (4)� Issuing agency code (if concatenated unique item identifier is used).** �� (5)� Enterprise identifier (if concatenated unique item identifier is used).** �� (6)� Original part number (if there is serialization within the original part number).** �� (7)� Lot or batch number (if there is serialization within the lot or batch number).** �� (8)� Current part number (optional and only if not the same as the original part number).** �� (9)� Current part number effective date (optional and only if current part number is used).** �� (10)� Serial number (if concatenated unique item identifier is used).** �� (11)� Description. ** Once per item. �� (f)� The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: �� (1)� End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. �� (2)� Embedded items shall be reported by one of the following methods� �� (i)� Use of the embedded items capability in WAWF; �� (ii)� Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or �� (iii)� Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. �� (g)� Subcontracts.� If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause)
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/e841392adb16479eb2972c511739e9ef/view)
Place of Performance: Address: Saint Paul, MN 55111, USA; Zip Code: 55111; Country: USA
Record: SN05659386-F 20200517/200516071017 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

28 -- Re-Manufactured Caterpillar Diesel Engine