Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF MAY 29, 2020 SAM #6756
AWARD

66 -- Laser System

Notice Date
5/27/2020 11:02:56 AM
 
Notice Type
Award Notice
 
NAICS
334413 — Semiconductor and Related Device Manufacturing
 
Contracting Office
FA8751 AFRL RIKO ROME NY 13441-4514 USA
 
ZIP Code
13441-4514
 
Solicitation Number
FA875120Q0047
 
Archive Date
06/11/2020
 
Point of Contact
Brooke McDonald
 
E-Mail Address
Brooke.McDonald@us.af.mil
(Brooke.McDonald@us.af.mil)
 
Award Number
FA875120P0019
 
Award Date
05/27/2020
 
Awardee
TOPTICA PHOTONICS, INC Farmington NY USA
 
Award Amount
79107.80
 
Description
AFRL requires a multi-diode laser system with the follow specifications: System considerations: laser system External cavity diode lasers must be manufactured from solid metal design in a �puck� configuration Alignment-free, grating-stabilized lasers Narrow linewidth, optimized stability against temperature variations, vibrations and acoustic noise (eigenresonance of grating holder > 3.5 kHz) Resonator design should have virtual pivot point for increased mode hop-free tuning (>5 GHz for 650 nm) laser diodes should support fast modulation, AC and DC coupling optomechanics for beam angle compensation high quality fiber optics for high fiber coupling efficiency System considerations: electrical system Touch display controls and knobs for feel and software upgradability Low current noise: 1 hr warmup Long term laser stability: 1 hr warm-up CPU and FPGA control for scanning and locking Interface over Ethernet and USB. Graphical interface for remote control via computer DLC MDL PRO: Multi Diode Laser system platform base Configurable multi tunable diode laser system Requires at least one of the configurable laser modules MDL DL pro, MDL DL pro HP, MDL DFB pro or at least one pre-configured laser module MDL pro XXX or MDL pro HP XXX Supports up to four laser modules Drawer system with full extension May be mounted in standard 19-inch rack with 500 mm or 700 mm depth (4 post rack required) Sub-rack 19-inch platform for laser modules MDL DL PRO: Multi Diode Laser system Configurable module DL pro Design wavelength: 650 nm Module for DLC MDL pro External cavity optical worst-case power after isolator lasing at 650 nm: 35 mW Includes DLC pro or 2nd laser upgrade for it DL pro for 5.6 and 9 mm diodes, grating stabilized diode laser in pro design Laser diode is specified, integrated and the complete system tested by TOPTICA Frequency stability 4 kW/cm^2, max 40 W cw Can be integrated DL pro, MDL pro, DFB pro L, TA pro, BoosTA, BoosTA pro MDL DL PRO HP: optical Multi Diode Laser system Configurable module DL pro Design wavelength 455 nm Module for DLC MDL pro Includes DLC pro or 2nd laser upgrade for it For flexible customization and configuration Includes laser diode and isolator grating stabilized diode laser in pro design Parameters (depending specific selection): center wavelength, coarse tuning, max output power (ex fiber), mode hop free tuning 20.. 50 GHz, linewidth <150 kHz for <600nm, else <500 kHz, frequency stability <100 MHz/K, no diode change by customer possible Laser diode is specified, integrated and the complete system tested by TOPTICA Frequency stability << 100 MHz/K Laser resonator machined from a solid block for enhanced acoustic, temperature and alignment stability and narrow linewidth Alignment-free coarse tuning Ideal virtual pivot point for mode hop free tuning Fast Modulation (AC & DC coupled) Beam angle compensation optomechanics. Includes FiberDock suited for laser of this module Extremely stable fiber coupler with all needed degrees of freedom (2 X/Y+Z) Easy flexure based alignment Lowest noise and drift, high resolution current, temperature and piezo drivers Flexible control by integrated CPU & FPGAs for intelligent features: scanning, signal display, locking, relock, FFT, power stabilization Wide scan mode with synchronized data recording for spectroscopy and component testing 7"" capacitive touch display together with four rotary knobs for comfortable and efficient front panel control Graphical PC user interface as well as command based (USB+TCP/IP) interface for remote control
 
Web Link
SAM.gov Permalink
(https://beta.sam.gov/opp/2922504ea6874daaaaacf9ae644a784c/view)
 
Record
SN05670994-F 20200529/200527230152 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.