SOLICITATION NOTICE
59 -- COMB. SYNOPSIS/SOL - Glen Canyon Elect. Supplies
- Notice Date
- 6/3/2020 10:01:28 AM
- Notice Type
- Presolicitation
- NAICS
- 335313
— Switchgear and Switchboard Apparatus Manufacturing
- Contracting Office
- UPPER COLORADO REGIONAL OFFICE SALT LAKE CITY UT 84138 USA
- ZIP Code
- 84138
- Solicitation Number
- 140R4020Q0060
- Response Due
- 6/16/2020 12:00:00 AM
- Archive Date
- 07/01/2020
- Point of Contact
- Bass, Benjamin
- E-Mail Address
-
bbass@usbr.gov
(bbass@usbr.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Awardee
- null
- Description
- COMBINED SYNOPSIS/SOLICITATION - This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation number 140R4020Q0060 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-05 effective 02/27/2020. This is a total small business set-aside under NAICS 335999- All other miscellaneous electrical equipment and component manufacturing, with a small business size standard of no more than 500 employees. SUBMITALS - Written, signed offers on a company letterhead with contact information are due no later than 16 June 2020 by electronic mail to bbass@usbr.gov. For information regarding this Request for Quotation, please contact Benjamin Bass, Contract Specialist at bbass@usbr.gov. Please review and utilize the attached statement of work for specifications and the attached excel spreadsheet for convenience in providing quotations. Please note any submission requirements when submitting materials for consideration. PROJECT DESCRIPTION: Glen Canyon Dam is a hydro-electric power plant located in Page, Arizona. It is operated and maintained by the Glen Canyon Field Division, a division of the US Bureau of Reclamation. Glen Canyon has undertaken an effort to rebuild its Generator step-up (GSU) transformer control cabinets. To facilitate this, Glen Canyon is seeking to procure the equipment and material listed within. A. The contractor shall provide all the items in the quantities listed in the excel attachment for use in the rebuild of the GSU transformer control cabinets. B. Listed products must be compatible with associated products listed. C. Quantities shown are minimum amounts of each item. Items sold in packs, bags, pairs, or bulk quantities may be provided given the total amount is greater than the minimum amounts shown within. D. Equivalent products will be considered if documentation is provided to demonstrate how they are equivalent and compatible with associated components for a complete system. Include all data sheets and/or catalogs of the proposed items. E. All offered products shall comply with any applicable, Institute of Electrical and Electronics Engineers (IEEE), National Electrical Manufacturers Association (NEMA), or International Electrotechnical Commission (IEC) standards and be suitable for industrial use. GLEN CANYON ELECTRICAL MATERIAL SUPPLY PRODUCTS BREAKERS A. 125 VDC Breakers 1. Catalog No. 1492-D2C060; DC Circuit Breakers manufactured by Allen-Bradley, www.ab.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Twelve (12) DC circuit breakers. B. 480 VAC Breakers 1. Catalog No. 140G-G2C3-C50-AA; Molded Case Circuit Breakers manufactured by Allen Bradley, www.ab.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Four (4) AC breakers. CABLE TRAYS A. Cable Tray 1. Catalog No. 30065T14; Cable Trays manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Forty (40) cable trays. B. Vertical Outside Bend 1. Catalog No. 30065T838; Vertical Outside Bends manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Seven (7) vertical outside bends. C. Hanging Clamps 1. Catalog No. 30065T518; Hanging Clamps manufactured by McMaster Carr, website: www.mcmaster.com; or equal, (see attached PDF for Eqivalent Characteristics)Total Quantity: Eighty-eight (88) hanging clamps. D. Straight Connectors 1. Catalog No. 30065T513; Straight Connectors manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 184 straight connectors. E. Horizontal Adjustment Connectors 1. Catalog No. 30065T511; Horizontal Adjustment Connectors manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Fifty (50) horizontal adjustment connectors. F. Vertical Adjustment Connectors 1. Catalog No. 30065T512; Vertical Adjustment Connectors manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Fifty (50) horizontal adjustment connectors. G. Female-Threaded Anchors 1. Catalog No. 97083A52; Female-Threaded Anchors manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 180 female-threaded anchors. H. Installation Tool 1. Catalog No. 97077A180; Installation Tools manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Twenty-seven (27) installation tools. I. Threaded Rods 1. Catalog No. 90322A215; Threaded Rods manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 135 threaded rods. CONDUCTORS AND CABLES A. General Manufactured no more than 24 months prior to installation of each unit. Round, except for 2 conductor cable with parallel conductors. 1. Conductors: Copper in accordance with ASTM B8; Class B or C for power cables; Stranded conductors.; AWG or kcmil designation. 2. Coverings or insulation: Suitable for installation in vertical position without injury to covering or deformation of insulation when supported in accordance with NFPA 70. Insulation type: Tray Rated; XHHW or THHN, unless stated otherwise. B. Ground Cable 1. Catalog No. Q10607; Ground cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Three (3) 250-foot spools of 1 conductor, 6 AWG cable. C. Control Cable 1. Catalog No. A51212; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Seven (7) 500-foot spools of 12 conductor, 12 AWG cable; Three (3) 1500-foot spools of 12 conductor, 12 AWG cable. 2. Catalog No. A11602R; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: One (1) 500-foot spools of 2 conductor, 16 AWG cable. 3. Catalog No. A11202R; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Eight (8) 500-foot spools of 2 conductor, 12 AWG cable. 4. Catalog No. 47643QS; Control cable manufactured by Belden, website: www.belden.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Eighteen (18) 500-foot spools of 2 conductor, 10 AWG cable.; Three (3) 1500-foot spools of 2 conductor, 10 AWG cable. 5. Catalog No. L11604; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Three (3) 500-foot spools of 4-pair conductors, 16 AWG cable. 6. Catalog No. L11612; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Three (3) 1500-foot spools of 12-pair conductors, 16 AWG cable. D. Power Cable 1. Catalog No. M508ST-04; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: One (1) 250-foot spool of green 1 conductor, 8 AWG cable. 2. Catalog No. M508ST-07; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: One (1) 250-foot spool of orange 1 conductor, 8 AWG cable. 3. Catalog No. M508ST-08; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: One (1) 250-foot spool of yellow 1 conductor, 8 AWG cable. 4. Catalog No. M508ST-10; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: One (1) 250-foot spool of brown 1 conductor, 8 AWG cable. 5. Catalog No. AF30803; Control cable manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Three (3) 500-foot spools of 3 conductor, 8 AWG with 1 conductor, 10 AWG ground cable. E. SIS Wire 1. Catalog No. C81201-06; SIS Wire manufactured by OmniCable, website: www.omnicable.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Ten (10) 500-foot spools of #12 SIS wire. LABELS A. Wire and Cable Labels 1. Catalog No. M71-187-1-342; Labels manufactured by Brady, website: www.bradyid.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 6600 labels. 2. Catalog No. M71-21-427; Labels manufactured by Brady, website: www.bradyid.com; or equal(see attached PDF for Eqivalent Characteristics), Total Quantity: 6600 labels. NUTS / BOLTS A. Steel Hex Nut 1. Catalog No. 90480A195; Steel hex nuts manufactured by McMaster-Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 2200 steel hex nuts. B. External Tooth Lock Washer 1. Catalog No. 91114A011; External-tooth lock washers manufactured by McMaster-Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 2200 external-tooth lock washers. C. Strut Channel Bolt 1. Catalog No. 4A987; Bolts manufactured by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 250 strut channel bolts. D. Strut Channel Flat Nut 1. Catalog No. 4A986; Flat Nuts manufactured by Grainger, website: www.grainger.com; or equal(see attached PDF for Eqivalent Characteristics), Total Quantity: 100 flat nuts. E. Anchor Bolt 1. Catalog No. 21Y463; Anchor bolts manufactured by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 150 anchor bolts. F. Hex Nut for Anchor Base 1. Catalog No. 45NZ83; Hex Nuts distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 100 hex nuts for anchor base. G. Hex Nut for Cable Tray 1. Catalog No. 95505A605; Hex Nuts manufactured by McMaster Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 300 hex nuts for cable tray. H. Flat Washer 1. Catalog No. 90107A033; Stainless Steel Washer manufactured by McMaster- Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 300 flat washers. RACEWAYS A. Rigid Metal Conduit 1. Catalog No. 5ZM30; Rigid Galvanized Steel Conduit distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Forty-nine (49) pieces of 3/4-inch conduit. 2. Catalog No. 5ZM17; Rigid Galvanized Steel Conduit distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Fifty-four (54) pieces of 1-inch conduit. 3. Catalog No. 5ZM25; Rigid Galvanized Steel Conduit distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Ninety (90) pieces of 2-inch conduit. B. Conduit Straps 1. Catalog No. 206F15; Conduit Straps distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Thirty-nine (39) conduit straps. 2. Catalog No. 206F16; Conduit Straps distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Thirty-nine (39) conduit straps. 3. Catalog No. 5YB99; Steel Channel Pipe Strap distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 130 conduit straps. C. Conduit Backs 1. Catalog No. 206F74; Conduit Backs distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Thirty-nine (39) conduit backs. 2. Catalog No. 206F36; Conduit Backs distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Thirty-nine (39) conduit backs. D. Conduit Hubs 1. Catalog No. 52AU47; Conduit Hubs distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Eleven (11) conduit hubs. 2. Catalog No. 52AU63; Conduit Hubs distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Eight (8) conduit hubs. 3. Catalog No. 52AU87; Conduit Hubs distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Forty-five (45) conduit hubs. E. Conduit Unions 1. Catalog No. 7755K26; Conduit unions manufactured by McMaster-Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Forty-five (45) conduit unions. F. Conduit Boxes 1. Catalog No. 36LL73; Conduit Body distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Thirty-eight (38) conduit bodies. 2. Catalog No. 35U137; Pulling elbow distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Three (3) pulling elbows. 3. Catalog No. 52AW14; Pulling elbow distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Three (3) pulling elbows. G. Strut Channel 1. Catalog No. 36HY04; Strut channel distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Thirty-six (36) strut channel sections. 2. Catalog No. 2HZD8; Post Base distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Twenty-two (22) post bases. 3. Catalog No. 2HAK4; Flat connector plates distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Forty-five (45) flat connector plates. H. Wire Duct 1. Catalog No. 53UH88; Wire Duct distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Fifteen (15) wire duct sections. 2. Catalog No. 53UH91; Wire duct distributed by Grainger, website: www.grainger.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Eight (8) wire duct sections. RELAYS A. Industrial Relay Base Unit 1. Catalog No. 700-P000A1; Base Unit manufactured by Rockwell Automation, website: www.rockwellautomation.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Ten (10) base units. B. Contact Cartridges 1. Catalog No. 700-CP1; Contact Cartridge manufactured by Rockwell Automation, website: www.rockwellautomation.com; or equal(see attached PDF for Eqivalent Characteristics) Total Quantity: Eighty (80) cartridges. C. Adder Deck 1. Catalog No. 700-PB00; Adder Deck manufactured by Rockwell Automation, website: www.rockwellautomation.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Ten (10) adder decks. D. Operating Coil 1. Catalog No. PA236; Operating Coil manufactured by Rockwell Automation, website: www.rockwellautomation.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Ten (10) operating coils. E. DIN Rail Adapter 1. Catalog No. 700-DRA; DIN Rail Adapter manufactured by Rockwell Automation, website: www.rockwellautomation.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Ten (10) DIN rail adapters. SWITCHES A. Single Throw Safety Switch 1. Catalog No. HU362DS; Safety Switch manufactured by Square D, website: www.se.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: One (1) single throw safety switches. TRANSFORMERS A. Control Transformer 1. Catalog No. 1497B-A9-M14-0-N; Control Power Transformers manufactured by Rockwell Automation, website: www.rockwellautomation.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Four (4) transformers. B. Fuse Block and Fuse 1. Catalog No. BM6031SQ; Fuse Blocks manufactured by Cooper Industries, website: www.cooperindustries.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Three (3) fuse blocks. 2. Catalog No. FNM-6-1/4; Time-Delay Fuse manufactured by Cooper Industries, website: www.cooperindustries.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Four (4) fuses. TERMINAL BLOCKS A. Power Blocks 1. Catalog No. 1492-PD3C141; Power Blocks manufactured by Allen-Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Four (4) power blocks. B. Terminal Blocks 1. Catalog No. 1492-CD3; Terminal Blocks manufactured by Allen-Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 1200 terminal blocks. C. Terminal Block End Anchors 1. Catalog No. 1492-N23; Mounting Rails manufactured by Allen Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: 104 terminal block end anchors. D. Terminal Block End Barriers 1. Catalog No. 1492-N16; Terminal Block End Barriers manufactured by Allen Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 104 terminal block end barriers. E. DIN Rails 1. Catalog No. 1492-N1; Mounting Rails manufactured by Allen Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Thirty-five (35) DIN rail sections. 2. Catalog No. 199-DR1; Mounting Rails manufactured by Allen Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Four (4) DIN rail sections. F. Marker Strips 1. Catalog No. 1492-N8; Marker Strips manufactured by Allen Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics), Total Quantity: Fifty (50) marker strips. G. Standoff Brackets 1. Catalog No. 1492-N25; Standoff Brackets manufactured by Allen Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 108 standoff brackets. H. Solid Jumpers 1. Catalog No. 1492-N15; Solid Jumpers manufactured by Allen Bradley, website: www.ab.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 354 solid jumpers. TERMINATIONS A. Compression Lugs 1. Catalog No. 6926K74; Compression Lugs manufactured by McMaster-Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: Twenty-five (25) compression lugs for �-inch screw installation. 2. Catalog No. 6926K73; Compression Lugs manufactured by McMaster-Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics)Total Quantity: Twenty-five (25) compression lugs for #10 screw installation. B. Ring Terminals 1. Catalog No. 7113K49; Insulated Ring Terminals manufactured by McMaster- Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 200 ring terminals for 16 to 14 AWG wire and #8 screw. 2. Catalog No. 7113K24; Insulated Ring Terminals manufactured by McMaster- Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 200 ring terminals for 16 to 14 AWG wire and #10 screw. 3. Catalog No. 7113K48; Insulated Ring Terminals manufactured by McMaster- Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 2550 ring terminals for 12 to 10 AWG wire and #8 screw. 4. Catalog No. 7113K29; Insulated Ring Terminals manufactured by McMaster- Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 2550 ring terminals for 12 to 10 AWG wire and #10 screw. 5. Catalog No. 7113K611; Insulated Ring Terminals manufactured by McMaster- Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 200 ring terminals for 22 to 18 AWG wire and #8 screw. 6. Catalog No. 7113K98; Insulated Ring Terminals manufactured by McMaster- Carr, website: www.mcmaster.com; or equal (see attached PDF for Eqivalent Characteristics) Total Quantity: 200 ring terminals for 22 to 18 AWG wire and #10 screw. DELIVERY Products are to be delivered freight on board-destination (FOBD), between the hours of 8:00AM - 4:00PM Monday through Thursday to: Attention: Dan Fox USBR Glen Canyon 805 Bureau Street Page, AZ 86040 PROVISIONS AND CLAUSES: The provision at 52.212-1, Instructions to Quoters-Commercial applies to this acquisition. Addendum to 52.212-1 substitutes the term �quote� where the term �offer� appears in the provision. The following Provisions Apply to the Solicitation Process of this Procurement: 52.252-1- Solicitation Provisions Incorporated by Reference (Feb 1998); 52.252.5 - Authorized Deviations in Provisions (APR 1984); 52.212-1 - Instructions to Quoters � Commercial Items (OCT 2018); 52.212-3 - Quoter Representations and Certifications � Commercial Items (DEC 2019) - must be completed and be active online at http://www.sam.gov. Prospective contractor is advised to ensure that the NAICS code identified for this procurement is contained in its online representations and certifications in the System for Award Management registry.; 52.203-18 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (JAN 2017); 52.204-7 - System for Award Management (SAM) (OCT 2018); 52.204-16 - Commercial and Government Entity Code Reporting (JUL 2016); 52.211-6 Brand Name or Equal (AUG 1999); 52.225-25 - Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran�Representation and Certification (Oct 2015); 1452.215-71 Use and Disclosure of Proposal Information--Department of the Interior (Apr 1984); WBR 1452.225-82 - Notice of World Trade Organization Government Procurement Agreement Evaluations--Bureau of Reclamation (May 2005); The Following Provision must be Completed by and Signed by the Submitting Entity with their quotation package. 52.204-24 � Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment. (DEC 2019) The Quoter shall not complete the representation in this provision if the Quoter has represented that it �does not provide covered telecommunications equipment or services as a part of its quoted products or services to the Government in the performance of any contract, subcontract, or other contractual instrument� in the provision at 52.204-26, Covered Telecommunications Equipment or Services-Representation, or in paragraph (v) of the provision at 52.212-3, Quoter Representations and Certifications-Commercial Items. (a) Definitions. As used in this provision� �Covered telecommunications equipment or services�, �critical technology�, and �substantial or essential component� have the meanings provided in clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Prohibition. Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Contractors are not prohibited from providing� (1)A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles. (c) Procedures. The Quoter shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for �covered telecommunications equipment or services�. (d) Representation. The Quoter represents that it � will, � will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. (e) Disclosures. If the Quoter has represented in paragraph (d) of this provision that it �will� provide covered telecommunications equipment or services�, the Quoter shall provide the following information as part of the quote� (1) A description of all covered telecommunications equipment and services quoted (include brand; model number, such as original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable); (2) Explanation of the proposed use of covered telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b) of this provision; (3) For services, the entity providing the covered telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known); and (4) For equipment, the entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known). Signed: _____________________________________________ Date: ______________ The following Clauses Apply to the Solicitation and Any Subsequent Award for this Procurement: 52.252-2 - Clauses Incorporated by Reference (FEB 1998). Any Clauses incorporated by Reference can be found in full text at: https://www.acquisition.gov/far; 52.252-6 - Authorized Deviations in Clauses (APR 1984); 52.212-4 - Contract Terms and Conditions � Commercial Items (OCT 2018); 52.212-5 � Contract Terms and Conditions Required to Implement Statutes or Executive Orders � Commercial Items (MAR 2020); 52.203-6 - Restrictions on Subcontractor Sales to the Government (Sept 2006); 52.203-19 - Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017); 52.204-4 - Printed or Copied Double-Sided on Postconsumer Fiber Content Paper (May 2011); 52.204-10 - Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).; 52.204-13 - System for Award Management Maintenance (OCT 2018); 52.204-18 - Commercial and Government Entity Code Maintenance (JULY 2016); 52.204-23 - Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018); 52.204-25 - Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Aug 2019) (Section 889(a)(1)(A) of Pub. L. 115-232).; 52.209-10 - Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).; 52.219-6 - Notice of Total Small Business Set Aside (DEVIATION)(JUL 2019); 52.219-8 - Utilization of Small Business Concerns (OCT 2018) ; 52.219-14 - Limitations on Subcontracting (Jan 2017); 52.219-28 - Post Award Small Business Program Representation (Jul 2013) (15 U.S.C. 632(a)(2)).; 52.222-3 - Convict Labor (June 2003) (E.O. 11755).; 52.222-17- Nondisplacement of Qualified Workers (MAY 2014); 52.222-19 - Child Labor-Cooperation with Authorities and Remedies (Jan 2020) (E.O.13126); 52.222-21 - Prohibition of Segregated Facilities (Apr 2015); 52.222-26 - Equal Opportunity (SEPT 2016) (E.O. 11246); 52.222-35 - Equal Opportunity for Veterans (OCT 2015)(38 U.S.C. 4212); 52.222-36 - Equal Opportunity for Workers with Disabilities (JULY 2014) (29 U.S.C. 793).; 52.222-37 - Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).; 52.222-40 - Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).; 52.222-50 - Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).; 52.222-55, Minimum Wages Under Executive Order 13658 (MAR 2016); 52.223-18 - Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011); 52.225-1 - Buy American�Supplies (May 2014) (41 U.S.C. chapter 83).; 52.225-13 - Restrictions on Certain Foreign Purchases (JUN 2008); 52.232-33 - Payment by Electronic Funds Transfer � System for Award Management (OCT 2018); 52.232-40 - Providing Accelerated Payments to Small Business SubContractors (DEC 2013); 52.233-3 - Protest After Award (AUG 1996); 52.233-4 - APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004); 52.242-15 � Stop Work Order (AUG 1989); 52.247-34 - F.o.b. Destination. (NOV 1991) Additional Clauses that will apply to any award resulting from this solicitation are: DOI-AAAP-0028 - Electronic Invoicing and Payment Requirements � Invoice Processing Platform (IPP) (APR 2013); DOI-AAAP-0050 Contractor Performance Assessment Reporting System (Dec 2015); 1452.201-70 � Authorities and Delegations (SEP 2011) WBR1452.201-80 �Contracting Officer�s Representative�s Authorities and Limitations � Bureau of Reclamation (MAY 2018) Written, signed offers on a company letterhead with contact information are due no later than 16 June 2020 by electronic mail to bbass@usbr.gov. For information regarding this Request for Quotation, please contact Benjamin Bass, Contract Specialist at bbass@usbr.gov.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/67e8a1ca939f4e7081ab2901d677f4a1/view)
- Record
- SN05679396-F 20200605/200603230153 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |