Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JUNE 05, 2020 SAM #6763
SOURCES SOUGHT

34 -- Sources Sought Machining and Heat Treating of Charpy Impact Specimens

Notice Date

6/3/2020 11:28:33 AM
 

Notice Type

Sources Sought
 

NAICS

33299 —
 

Contracting Office

DEPT OF COMMERCE NIST GAITHERSBURG MD 20899 USA
 

ZIP Code

20899
 

Solicitation Number

NB647020-20-02092
 

Response Due

6/19/2020 4:00:00 PM
 

Archive Date

07/04/2020
 

Point of Contact

Angela L. Hitt, Phone: 3034977305, MeeLondrell T. Lumpkin, Phone: 3034975270, Fax: 3034975470
 

E-Mail Address

angela.hitt@nist.gov, meelondrell.lumpkin@nist.gov
(angela.hitt@nist.gov, meelondrell.lumpkin@nist.gov)
 

Description

The National Institute of Standards and Technology (NIST), Material Measurement Laboratory (MML), Applied Chemicals and Materials Division (ACMD) Charpy Program produces Standard Reference Materials (SRMs) to verify the performance of Charpy impact machines.� The steel industry worldwide depends on these SRMs to ensure production steel meets specifications.� Due to the exacting specifications of the SRMs, only pre-qualified vendors are used to reduce the risk of non-performance due to NIST�s need to serve our customers with SRMs. The qualification program is used to go through this process of tuning the production runs for output that meets NIST�s stringent requirements. The National Institute of Standards & Technology (NIST) seeks information on vendors that are capable of providing Machining and Heat Treating of Charpy Impact Specimens. The purpose of this notice is to identify organizations capable of providing the necessary items and meeting the minimum contractor qualifications now and/or in the near future to expand our Charpy Program. This announcement is not a Request for Proposals or Quotes (RFP/RFQ) and does not commit the Government to award a contract now or in the future. The information contained in this notice is a DRAFT only and, as such, is subject to change prior to issuance of a solicitation. No solicitation is available at this time. After the results of this market research are obtained and analyzed and compared with NIST's minimum (see attached Statement of Work), NIST may conduct a competitive procurement and subsequently award a contract. Moreover, Machining Qualification Program Policy provides guidance to potential vendors on how to be placed on the NIST Charpy Qualified Manufacturers List (QML). NIST is seeking responses from all responsible sources, including large and small businesses (SB, SDB, WOSB, HUBZone, SDVOSB, and VOSB). This requirement is assigned a NAICS code of 33299 with a small business size standard of 750 employees. � Interested business organizations that believe they are capable of meeting the requirement should submit electronic copies of their capability statement along with the attached Market Research Doc.� Please limit responses to four (4) pages or less. Responses should include the following information: 1. Name of company and address that will provide product. 2. Company DUNS number, Cage Code, Tax ID Number, and Type of small business, e.g., Services Disabled Veteran Owned Small Business, Veteran-owned small business, 8(a), HUBZone, Women-Owned Small Business, Small disadvantaged business, or Small Business HUBZone business. 3. Company point of contact, phone, fax, and e-mail. 4. Name of company that will manufacture the product. 5. Spec sheets and examples of products that meet the specifications. 6. Typical lead time to deliver the product after receipt of order. 7. Contact information of customers who have obtained and used these products 8. Any other relevant information that is not listed above which the Government should consider in developing its minimum specifications and finalizing its market research. Any proprietary information should be so marked. The written capability statement and Market Research Inquiry Form should be received by the Contract Specialist, Angela Hitt by email at Angela.Hitt@nist.gov no later than 5 p.m. MDT, Friday, June 19, 2020. Only electronic responses will be accepted.� Faxes will not be accepted. The capability statement shall identify the business status of the organization. No quotes will be accepted at this time and will not be considered. NIST Current Charpy Qualified Manufacturers List (QML) Vendor: B M C MARKETING CORP Contract Type: Indefinite Delivery- Indefinite Quantity with Firm-Fixed-Price Delivery Orders IDIQ Contract #: SB1341-16-CQ-0010 Period of Performance: 06/14/2016 - 06/14/2021 DUNS #: �149724031 Current IDIQ Value: �$200,715.60 Vendor: LABORATORY TESTING, INC. Contract Type: Indefinite Delivery- Indefinite Quantity with Firm-Fixed-Price Delivery Orders IDIQ Contract #: SB1341-16-CQ-0012 Period of Performance: 06/15/2016 - 06/14/2021 DUNS #: �065026734 Current IDIQ Value: �$1,021,744.75 Vendor: MP MACHINERY AND TESTING, LLC. Contract Type: Indefinite Delivery- Indefinite Quantity with Firm-Fixed-Price Delivery Orders IDIQ Contract #: SB1341-16-CQ-0013 Period of Performance: 06/20/2016 - 06/14/2017 DUNS #: �832320530 Current IDIQ Value: �$588,249.00 Vendor: SHEARER, THOMAS D Contract Type: Indefinite Delivery- Indefinite Quantity with Firm-Fixed-Price Delivery Orders IDIQ Contract #: SB1341-16-CQ-0014 Period of Performance: 06/16/2016 - 06/14/2021 DUNS #: �080113524 Current IDIQ Value: �$173,631.75
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/85d44f4e57004e99b157e58b150d6d61/view)
 

Place of Performance

Address: Boulder, CO 80305, USA

Zip Code: 80305

Country: USA
 

Record

SN05679742-F 20200605/200603230155 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |