SOURCES SOUGHT
70 -- Certifying and Validation Software
- Notice Date
- 6/16/2020 10:18:52 AM
- Notice Type
- Sources Sought
- NAICS
- 511210
— Software Publishers
- Contracting Office
- W6QK ACC-PICA PICATINNY ARSENAL NJ 07806-5000 USA
- ZIP Code
- 07806-5000
- Solicitation Number
- PANNWJ-20-P-0000006813
- Response Due
- 7/1/2020 1:00:00 PM
- Archive Date
- 07/16/2020
- Point of Contact
- Nicole Estrada
- E-Mail Address
-
nicole.a.estrada3.civ@mail.mil
(nicole.a.estrada3.civ@mail.mil)
- Description
- The Contracting Command � New Jersey, on behalf of U.S. Army Combat Capabilities Development Command � Armaments Center (CCDC AC), (FCDD-ACE-SP) at Picatinny Arsenal, NJ, is conducting market research to determine the capability of businesses to provide software that is in support of Combat Capabilities Development Command Armament Center�s (CCDC AC) Model Based Enterprise (MBE) efforts.� This effort focuses on the 3D CAD model driving many aspects of CCDC AC�s processes.� CCDC AC is seeking software that will assist in the process of certifying that the 3D CAD model is accurate to CCDC AC 3D modeling standards and can be considered the authoritative Technical Data Package (TDP). Specific capabilities that CCDC AC is seeking in this software are: ������ 1.� Comparing 3D CAD models to approved 2D drawings to ensure that all annotations from the drawing have been created as driving dimensions in the model during a 2D to 3D conversion.� The software should be�capable of comparing these two files (model and drawing), using a color coded display to identify differences between the two.� The software should also add any missing annotations that have been identified. ������� 2.� Checking models for machine readability; and identify, report, and correct machine readability errors. ������� 3.� Generating QIF files from the model for use in quality inspection machines, and generating inspection reports based on all model dimensions as well as CCDC AC�s specific quality symbol annotations. �������� 4.� Validating derivative files, including Quality Information Framework (QIF) and Standard for the Exchange of Product Data (STEP) files at a minimum, against the authoritative model to ensure they are the same, and generating a validation report. �������� 5.� Must be compatible with PTC Creo Solid Modeling Software and have floating licenses that can be shared among users. DISCLAIMER �THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY.�THIS IS NOT A �REQUEST FOR PROPOSAL (RFP)� TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMMATION PERTAINING TO THIS REQUIREMENT.� BACKGROUND: The applicable NAICS code for this requirement is 511210, Software Publishers, with a Small Business Size Standard of $42.5M.� The Product Service Code is 7030, Information Technology Software.� Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. �SUBMISSION DETAILS: Each potential source is requested to provide the contract number(s), dollar value(s) and brief description of work previously or currently being performed, which specifically demonstrates the contractor's ability to successfully satisfy the requirements of the Technical Services. Firms shall also provide point of contact information, where available, for the efforts cited above.� All data should be sent at no cost to the US Government by 01 July 2020 to the US Army CCDC AC. ATTN: Mrs. Nicole Estrada, nicole.a.estrada3.civ@mail.mil.� In addition, please provide the firm�s name and address, point of contact with telephone number and email address, CAGE Code and DUNS number, and size of business (i.e. large, small, disadvantaged, veteran owned, woman owned, etc.). This is a market survey for information only, and shall not be construed as a request for a proposal or as an obligation on the part of the US Government.� The US Government does not intend to award a contract on the basis of this market survey or otherwise pay for information solicited. The official response must be submitted to: U.S. Army Contracting Command New Jersey, ACC-NJ-JA, ATTN:� Mrs. Nicole Estrada, Building 9, Picatinny Arsenal, NJ 07806.� Electronic submittals are preferred and should be sent to Email: nicole.a.estrada3.civ@mail.mil.� Phone inquiries will not be addressed; all requests should be submitted in writing via email. �Respondents will not be notified of the results of the survey.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/9ba1cace1de242539555e785ab6b42fa/view)
- Place of Performance
- Address: Picatinny Arsenal, NJ 07806, USA
- Zip Code: 07806
- Country: USA
- Zip Code: 07806
- Record
- SN05693329-F 20200618/200616230211 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |