SOLICITATION NOTICE
17 -- CH-53 SE PKG 27
- Notice Date
- 6/19/2020 8:21:34 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333923
— Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
- Contracting Office
- NAVAIR WARFARE CTR AIRCRAFT DIV LKE JOINT BASE MDL NJ 08733 USA
- ZIP Code
- 08733
- Solicitation Number
- N68335-20-Q-0343
- Response Due
- 7/8/2020 12:00:00 AM
- Archive Date
- 01/04/2021
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Awardee
- null
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N68335-20-Q-0343 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 333923 with a small business size standard of 1,250.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit quotes. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-07-08 15:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Statement of Work. The NAWC-AD Lakehurst requires the following items, Purchase Description Determined by Line Item, to the following: LI 001: POLE, BLADE RESTRAINT, TAIL ROTOR, P/N:4158AS0106-1 in accordance with attached drawing package and statement of work, 2, EA; LI 002: MAIN ROTOR SLEEVE TO PILOT BOLTS OFF SET WRENCH, P/N:4158AS0190-1 in accordance with attached drawing package and statement of work, 2, EA; LI 003: INSTALL SET, Z-BRACKET, FUEL CELL TO SPONSON, P/N:4158AS0207-1 in accordance with attached drawing package and statement of work, 2, EA; LI 004: MAIN ROTOR PITCH CONTROL ROD TRAMMEL TOOL, P/N:4158AS0210-1 in accordance with attached drawing package and statement of work, 2, EA; LI 005: TOOL SET, ASSEMBLY/DIS-ASSEMBLY, ENGINE TO NGB, P/N:4158AS0316-1 in accordance with attached drawing package and statement of work, 2, EA; LI 006: MAIN GEAR BOX OIL COOLER FAN R/R TOOLS, P/N:4158AS0337-1 in accordance with attached drawing package and statement of work, 2, EA; LI 007: SET, ALIGNMENT, MAIN GEARBOX, P/N:4158AS0351-1 in accordance with attached drawing package and statement of work, 2, EA; LI 008: REMOVAL TOOL, OUTPUT FLANGE, NOSE GEARBOX, P/N:4158AS0390-1 in accordance with attached drawing package and statement of work, 2, EA; LI 009: MAIN ROTOR HEAD SPLIT CONE REMOVAL SAFETY RING, P/N:4158AS0395-1 in accordance with attached drawing package and statement of work, 2, EA; LI 010: SET, ADJUSTMENT, TRIM TAB, MAIN ROTOR BLADE, P/N:4158AS0400-1 in accordance with attached drawing package and statement of work, 2, EA; LI 011: PULLERS, SWASHPLATE, SERVO BOLT, P/N:4158AS0450-1 in accordance with attached drawing package and statement of work, 2, EA; LI 012: SET, AIRCRAFT BALANCING, BLADE AND DRIVESHAFT, P/N:4158AS0203-1 in accordance with attached drawing package and statement of work, 2, EA; LI 013: SET, ANGLE ADJUSTMENT, BLADE FOLD, P/N:4158AS0950-1 in accordance with attached drawing package and statement of work, 2, EA; LI 014: LOCATOR, FOLD ANGLE, #1 BLADE, P/N:4158AS0965-1 in accordance with attached drawing package and statement of work, 2, EA; LI 015: MULTIPLIER, TORQUE, QCA, P/N:4158AS0800-1 in accordance with attached drawing package and statement of work, 2, EA; LI 016: NGB OUTPUT GEAR ASSY SEAL RUNNER INSTALL/REM TOOL, P/N:4158AS0980-1 in accordance with attached drawing package and statement of work, 2, EA; LI 017: PLUG ASSEMBLY, #1, #3 ENGINE, P/N:4158AS0890-1 in accordance with attached drawing package and statement of work, 2, EA; LI 018: PLUG ASSEMBLY, #2 ENGINE, P/N:4158AS0893-1 in accordance with attached drawing package and statement of work, 2, EA; LI 019: SLING, DOCKSIDE LOADING, P/N:4158AS1000-1 in accordance with attached drawing package and statement of work, 2, EA; LI 020: SLING, MAIN ROTOR SERVO, P/N:4158AS0618-1 in accordance with attached drawing package and statement of work, 2, EA; LI 021: SLING, OBIGGS, P/N:4158AS0177-1 in accordance with attached drawing package and statement of work, 2, EA; LI 022: SERVICING LINES, HYDRAULIC, MAIN LANDING GEAR, P/N:4158AS0995-1 in accordance with attached drawing package and statement of work, 2, EA; LI 023: TUBE, FUEL SAMPLE/DRAIN, P/N:4158AS0990-1 in accordance with attached drawing package and statement of work, 2, EA; LI 024: FIXTURE, ROD END, MAIN ROTOR DAMPER, P/N:4158AS1045-1 in accordance with attached drawing package and statement of work, 2, EA; LI 025: TRAMMEL BAR, PITCH CONTROL ROD, TAIL ROTOR, P/N:4158AS0167-1 in accordance with attached drawing package and statement of work, 2, EA; LI 026: NUT TOOL, SPANNER, NGB OUTPUT SEAL, P/N:4158AS0820-1 in accordance with attached drawing package and statement of work, 2, EA; LI 027: CDRLs/ TDP in accordance with attached statement of work, 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, NAWC-AD Lakehurst intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. NAWC-AD Lakehurst is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a quote on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be ""ACTIVE"" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Payment will be provided once invoices are submitted through the Government's Wide Area Workflow system at https://wawf.eb.mil/. Payment terms: Net 30 days. No contract financing will be provided for this effort. This request neither implies nor requests the commencement of any effort. Further the Government shall incur no obligation whatsoever as a result of this proposal request if a contract is not executed. Interested parties shall submit a certified DD Form 2345 to request a drawing package to duane.hines@navy.mil NLT Wednesday 24 June 2020, 4:30 PM Eastern. Late requests will not be considered. Drawings shall be delivered via DoDSafe to the vendor's secure data custodian listed on the DD Form 2345 on the next working day after the closing date of drawing requests. DFARS 252.211-7003 Item Unique Identification and Valuation (IUIID)applies to this procurement
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/07ca55d946ac48099c4929d0bbdc7d79/view)
- Place of Performance
- Address: See Statement of Work.
- Record
- SN05697122-F 20200621/200622142805 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |