SOLICITATION NOTICE
78 -- Strength and Conditioning Equipment
- Notice Date
- 6/22/2020 11:33:12 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 339920
— Sporting and Athletic Goods Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- SOCEURMEDPAB0002
- Response Due
- 6/26/2020 12:00:00 AM
- Archive Date
- 12/23/2020
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Awardee
- null
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is SOCEURMEDPAB0002 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-06-26 15:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Stuttgart, null 70569 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Power�Rack with Custom Laser Cut Logo (See completed Salient Characteristics attachement), 4, Ea; LI 002: Urethane Utility Pin (Fixed), - Length 12"" - Made of Urethane Coated American Steel - Have 1"" cold rolled steel bolt and nut to affix securely to rack - Must attach directly to front/inside/top of rack for use or storage - Must Store Vertically or Horizontally, 4, Ea; LI 003: Split Change Plate Utility Pin - Minimum 11 Gauge American Steel - Must store side by side change plates up to 8.7"" in diameter (220mm) - Must fit 11 gauge rack with 1"" holes, 8, Ea; LI 004: Power Rack 2-bar Storage - 2 bar storage should fit exactly to the specifications of the current rack setup. The Length should be exactly 14-16�, width 7-9�, height 9-11� and made of the same 11 gauge American Steel. The 2 bar storage utilizes the 4 way hole design allowing all bars, brackets and add-ons to be secured in any direction, front , back side to side., 4, Ea; LI 005: Monkey Chin Bar� - Material minimum 11 Gauge Steel - Length 41"" - Width 19"" - Height 8"" - 2 Size horizontal bars 2"" and 3"" - Knurled crossbars, 4, Ea; LI 006: Power Rack Adjustable Jammer Arms Attachment with Knurled Handle - The Jammer Arm should be made of 11 Gauge American Steel - Should be at least 48� long, 3� width, 3� height and is made completely in the USA. - Adjustable Bracket should be 11.5""L x 10.5""W x14.5"" with a 14.5"" Handle Width - Handle portion must be Knurled, 1"" Diameter Heavy Wall Pipe and have Hitch Pin for Attachment, 4, Ea; LI 007: 8� Rack Connector - The high bridge shall be at least 8' length, 3"" width, 3"" height. Also, the high bridge shall fit the power rack. High Bridge shall be able to utilize 4-Way Hole Design allowing all bars, brackets, and add-ons to be secured in any direction front to back or side to side. High Bridge shall be provided in a custom unit color configuration., 3, Ea; LI 008: Selectorized Lat Pull / Low Row Machine (Free Standing) - Material minimum 11 Gauge Steel - Minimum 1"" Bolt Fasteners. - Minimum 300lb plate stack - Must have minimum 12 Position Modular Knurled Foot Pegs - Must have a premium upholstered, minimum 15.5� x 10.25� bicycle style seat - Must have minimum 12.5� thigh roller pads with 7 height positions and accommodate athletes up to 7' tall. - Must have adjustable machined HDPE band attachment points for adding an additional resistance option to the weight stack. - Must have Nylon Coated Aircraft Cables with Cable Thickness of 5/32""-7/32"" - Must have machined aluminum pulleys. - Minimum 70,000 PSI full pass mig welds - Minimum 3 mils TGIC Powder coat paint, 1, Ea; LI 009: Functional Cable Column (Single Handle, Free Standing) - Material minimum 11 Gauge Steel - Minimum 1"" Bolt Fasteners - Minimum 250lb plate stack - Must Include single handles and carabiner - Must have Single Handle Adjustable Attachment Point and adjust on chromed telespar tubing - Pulleys must be made from chromed hardened steel and high quality plastic - Must have free rolling, adjustable tension band pegs attachments points - Must have cam-guided cables for proper biomechanical loading of the muscle. - Must have Nylon Coated Aircraft Cables with Cable Thickness of 5/32""-7/32"" - Minimum 70,000 PSI full pass mig welds - Minimum 3 mils TGIC Powder coat paint, 1, Ea; LI 010: Adjustable NP3 Bench - Adjustable to 6 positions. 0, 15, 30, 45, 60, 75 Degrees. - Entire frame construction of 11-gauge and 7-gauge 2� square steel bent tubing and at least 70,000 PSI full-pass mig welds and rubber caps. - Integral wheels of solid rubber, 2� diameter (minimum). Must not contact floor when in use. - Handle at seat-end of bench for ease of transport. - Gravity-activated angle support - There should be no inserts or additional pads between back and seat pad. - Bench height 17-19�. - Pads should be made with at least 3/4� birch plywood backboard with all corners and edges rounded - 1� thick (minimum) high-density, non-moisture absorbing, closed-cell rebound foam covered with fully-sewn uniroyal �Spirit 2� naugahyde, mounted to frame. - Back pad 11-12� wide x 43-45� long. - Seat pad tapered from 10� (rear) to 6� (front) for comfort. - Bench must have ability to be stored in upright position when not in use., 4, Ea; LI 011: Rolling Power Block Cart - Length Range 24""-25"" - Width Range 20-22"" - Height Range 29""-31"" - Minimum 11 Gauge American Steel - Must have lockable heavy-duty wheels - Must have two levels of storage shelves to hold up to four Power Blocks - Must store powerblocks up to PRO125 - Must be designed for the extra handles to be stored on the bottom - Must have rubber top, 4, Ea; LI 012: Power Block Pro 125 Commercial Set - Maximum 21.5""x25"" of space, storable on powerblock cart. - 12.5 and 20 lb handles with contoured TPR comfort grips - Weight Range 12.5-125 lbs per hand - Increments 7.5 lbs - Made of steel material - Must have urethane coat, 4, Ea; LI 013: Vertical Storage Unit Side (4-tier height) - Material minimum 11 Gauge Steel - Depth Range 32""-34"" - Minimum Width 3"" - Height Range 48""-50"" - 3� X 3� tubing, 11 gauge uprights drilled through in 2 directions, spaced on 2� drilled 1 1/16� hole centers - Must be compatible with Jammer Arms for Belt Squat Attachment, Cable Columns and Lat Pull/Low Rows, 2, Ea; LI 014: Storage Unit Kettlebell Tray - Material minimum 11 Gauge Steel - Depth Range 11-13"" - Length Range 89-91"" - Height Range 4""-6"" - Must be compatible with Storage Unit Side (4-tier) - Must have inlaid rubber liner on tray, 4, Ea; LI 015: Urethane Change Plate (5lbs) - Must have a 92 +/12 Durometer - Must have a 50.50 MM Collar Opening - Tolerance must be w/in 10 Grams of Stated Weight - Must be 220 MM in Diameter | 22 MM thick - Must have 8.7 Inch Diameter - Must be Urethane Coated material, 24, Ea; LI 016: Urethane Change Plate (2.5lbs) - Must have a 92 +/12 Durometer - Must have a 50.50 MM Collar Opening - Tolerance must be w/in 10 Grams of Stated Weight - Must be 180 MM in Diameter | 20 MM thick - Must have 7.1 Inch Diameter - Must be Urethane Coated material, 24, Ea; LI 017: Dynamax Standard Medicine Ball (20lb) - 14� in diameter - Moisture resistant, 4, Ea; LI 018: Dynamax Standard Medicine Ball (10lb) - 14� in diameter - Moisture resistant, 4, Ea; LI 019: Rack Attached Dip Bar - Length Range 29-31"" - Width Range 26-28"" - Grip Diameter 2"" - Minimum 11 Gauge American Steel - Must have collapsible Space Saving Design - Must have Hitch Pin for Secure Attachment, 4, Ea; LI 020: 6 Bar Storage (Inline) - Length Range 52-54"" - Width Range 30-33"" - Height Range 3-4"" - Minimum 11 Gauge American Steel, 1, Ea; LI 021: Glute Ham Roller - Length Range 9-11"" - Width Range 23-25"" - Weight 20 lbs - Minimum 11 Gauge American Steel - Must have angled foot cup to allow for ultra easy setup and usage. - No straps to break or adjust. - All heavy duty steel construction � no cheap plastic to break. - Two handles for ab rollouts, shoulder press, rotation / anti-rotation. - Foot cup must accommodate heels or toes for hamstring curls, knee tucks, hip hinges, side lunges, mountain climbers and walks. - Must be compatible with bands for added resistance or assistance. - Must be reversible, can be used off of the front, back, even upside down. - Must be able to be used on a wall for presses, thoracic mobility exercises. - Must have smooth bearing wheels., 6, Ea; LI 022: Glute Ham Roller Storage Rack - Minimum 11 Gauge American Steel - Must hold up to 10 Glute Ham Rollers - Must have 4 wheels with brake mechanism on each wheel, 1, Ea; LI 023: Bent Lat Bar with Swivel (2"") - Length Range 47-49"" - Must be 2"" Diameter Bar - Must have a revolving, swivel mounted attachment point - Steel material, 2, Ea; LI 024: Mighty Mitts Cannon Ball Lat Bar - Minimum 11 Gauge American Steel - Length Range 29-31"" - Must have 2"" Diameter Bar - Must have 3"" balls at the ends of the bar which activate forearm muscles as well as grip strength. - Must be compatible with cable machine., 1, Ea; LI 025: Mighty Mitts Fat Chin Triangle - Minimum 11 Gauge American Steel - Length Range 8-10"" - Must have 2"" Diameter Grips - Must be compatible with cable machine and standard chin bar., 1, Ea; LI 026: Mighty Mitts Rack Ball 3� - Length 8"" - Must go all the way through the rack and secure on the back for security. - Must be compatible with 4-Way Hole Design and able to be secured in any direction front to back or side to side, 6, Ea; LI 027: Mighty Mitts Rack Ball 4� - Length 8"" - Must go all the way through the rack and secure on the back for security. - Must be compatible with 4-Way Hole Design and able to be secured in any direction front to back or side to side., 6, Ea; LI 028: DC Block - Length Range 18-20"" - Width Range 15-16"" - Made of Impact-Resistant Injected Plastic - Must have Crenelated Bumper allowing sideways force attenuation to avoid sidewall blowout. - Must interlock for stability, 48, Ea; LI 029: Power Rack Belt Squat Attachment with Belt - Belt squat apparatus should seamlessly attach to the existing and future racking structures. - Needs to have automatic safety �kickstand,� with a belt included. - This piece needs to be a hip loaded training system used in conjunction with the existing racking structure., 4, Ea; LI 030: Stash Hook - Length 3"" - Width 0.5"" - Height 4"" - Must fit 11 gauge rack with 1"" holes, 16, Ea; LI 031: Needle Bearing Bar (20kg) - Must have a weight of 20kg - Must have a diameter of 28mm - Must have Light Knurling - No center knurl - Must have a Clear Cerakote Shaft Coating - Minimum Tensile Strength of 190k PSI - Must have 2000lb static load testing - Must have10 precision ING Needle Bearings, 2, Ea; LI 032: Magnetic Collars (Pair) - Height 3"" - Weight 1 LB - Diameter 1.937"" to 2.007"" - Thickness 1.75"" - Twist To Tighten mechanism - Integrated Magnetic Storage - Made of 6,6 nylon commercial grade material, 14, Ea; LI 033: Tricep Rope - Made of strong, braided rope - Extra long for better range of motion - Must attach to cable machine, 1, Ea; LI 034: Power Block Adjustable Kettlebell - 4 Increments 18, 22, 26, 35 lbs. - Dimensions 5.75? L x 4.25? W x 10? H - Handle Diameter 32.77mm - Steel Selection Pin with Magnetic Lock, 4, Ea; LI 035: Kabuki Strength Transformer Bar - Camber of bar adjustable in 30 degree increments - 4 Sleeve Positions - 12 Angle Bracket - Angled and Knurled Handles - Weight 48 lbs - Sleeve length 16"" loadable area - 2"" diameter sleeve - Length 87.5"" (56"" center bar) - Black Oxide finish - Minimum 195k PSI Steel - Load Capacity 1500 lbs - High Density Foam Pad (30kg/m3) - Durable, Synthetic Leather Pad Cover, 1, Ea; LI 036: Kabuki Strength Power Bar - Clear Zinc - Weight 20kg - Sleeve length 16.5"" loadable area - Length 86.5"" - Zinc Finish - Minimum 250k PSI Steel - Load Capacity 1500 lbs - Snap Ring Mounting Hardware, 4, Ea; LI 037: Kabuki Trap Bar HD 25"" - Weight 30kg - Sleeve length 17"" loadable area - Length 77"" - Width 9"" - Height 23.5"" - Semi-Gloss Powder Coat Bar Finish - Clear Zinc Sleeve Finish - Zinc Plated Handle Finish - Load Capacity 1500 lbs, 4, Ea; LI 038: Kabuki Kadillac Bar - Grip Angles of 10, 12.5 and 15 degrees - Grip Distance Range 14"" narrow, 21"" mid and 29"" wide - Useable in both standard and reverse grip positions - Removable sleeve - Weight 20kg - Sleeve length 16.75"" loadable area - Handle diameter 1.25"" - Length 87"" - Texture Powder Coat Finish - Zinc Sleeve Finish, 2, Ea; LI 039: Kabuki 2"" Love Handles - Compatible with Kabuki Trap Bar, 4, Ea; LI 040: Assault Air Bike - Air bike should weigh exactly 95.64lbs and have an all-metal chain powered design. It should accommodate a user weight of no more than 300lbs and have the capability to include a wind shield., 2, Ea; LI 041: Concept 2 Rower (model D) w/PM5 - Recognized by Human Performance professionals as the standard for indoor based cardiovascular rowing training. Length should be exactly 96in, width 24in, seat height 14in, and monorail length 54inches. Nickel plated steel chain. The computer should be powered by two D cell batteries and be fully capable to show speed, stroke rate, timed and custom intervals with capability to store data to an external device or card., 1, Ea; LI 042: Concept 2 BikeErg w/ PM5 - Length should be exactly 48 in (122 cm) and width 24 in (61 cm). Weight 68 lb (31 kg). Seat to Pedal range 31�40.5 in (79�103 cm). Crank Length of 170 mm, Q Factor15.5 cm. Drive must have Polygroove belts with self-tensioning system (chain free). Must have PM5 Monitor. Welded aluminum frame. Steel feet. Black powder coat frame; gray anodized posts., 1, Ea; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf ""AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."" ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/d507934c68b24d3086c7d9eed14c7ac5/view)
- Place of Performance
- Address: Stuttgart, 70569, DEU
- Zip Code: 70569
- Country: DEU
- Zip Code: 70569
- Record
- SN05699237-F 20200624/200623042718 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |