MODIFICATION
59 -- Antenna, PN RF-3134-AT003, NSN 5985-01-590-8364
- Notice Date
- 6/25/2020 2:42:24 PM
- Notice Type
- Solicitation
- NAICS
- 334220
— Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
- Contracting Office
- DLA LAND AT ABERDEEN ABER PROV GRD MD 21005 USA
- ZIP Code
- 21005
- Solicitation Number
- SPRBL1-20-R-0027
- Response Due
- 7/24/2020 11:00:00 AM
- Archive Date
- 08/08/2020
- Point of Contact
- Jamie Turner, Mimi M. Kirkland
- E-Mail Address
-
Jamie.turner@dla.mil, mimi.kirkland@dla.mil
(Jamie.turner@dla.mil, mimi.kirkland@dla.mil)
- Description
- 1 . CONTRACT TYPE: This Request for Proposal (RFP) will result in a Firm-Fixed Price (FFP) Indefinite-Delivery Indefinite-Quantity (IDIQ) contract using FAR Part 12 and FAR Part 15 procedures for the purchase of the following commercial item: NOMENCLATURE: (HF) Full Loop Antenna NSN: 5985-01-590-8364 PART NUMBER: RF-3134-AT003 MANUFACTUER: L3Harris, CAGE 14304 2 . PERFORMANCE PERIOD: The performance period for any resultant contract will consist of one (1) five-year base period and no option periods. 3 . GENERAL INSTRUCTIONS: The solicitation package includes the RFP and Attachment 0001 - Technical Requirements.� 4 . APPROVED SOURCE/PART: The approved source for this part-numbered item L3Harris, CAGE 14304. In order to be eligible for award under this solicitation, offerors must be able to provide the approved part number. See the Supplies or Services and Prices/Costs section of the solicitation for approved part number and approved manufacturer CAGE code. Offerors who propose an alternate part number must do so in accordance with DLAD 52.217-9002, Conditions for Evaluation and Acceptance of Part Numbered Items, included in the Instructions, Conditions, and Notices to Offerors section of the solicitation. 5 . ORDERING YEARS: The five-year base period consists of five ordering years as follows: Ordering Year 1 - Date of Award plus 364 days Ordering Year 2 - 365 days through 729 days after contract award Ordering Year 3 - 730 days through 1,094 days after contract award Ordering Year 4 - 1,095 days through 1,459 days after contract award Ordering Year 5 - 1,460 days through 1,824 days after contract award 6 . Best Estimated Quantities (BEQ): The Government's0 employees (6) Contracting Office Address:���� 2800 Powder Mill Road Aberdeen Proving Ground, Maryland 21005 (7) Subject:� Sources Sought for two (2) stress-controlled rheometers with Ultra-Violet (UV) cure capability to analyze high-melting materials. (8) Proposed Solicitation Number:� W911QX20Q0093 (9) Sources Sought Closing Response Date: 06/10/2020 (10) Contact Point: Douglas Dennard, Contract Specialist, ����������������������������� �������������������������������Douglas.C.Dennard.civ@mail.mil ����������������������������������������������������������� ������ 301-394-3371 (11) A. Objective: To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation. B. Salient Characteristics C.1 Objective In an effort to enhance the basic research capability to characterize rheological properties of materials, including new molecules, formulations, resins and polymers.� The Materials division of the Weapons and Materials Research Directorate (WMRD) within the Army Research Laboratory (ARL), requires the supply and installation of one (1) stress-controlled rheometer with ultra-violet (UV) cure capability to analyze high-melting materials is required. The Contractor shall supply and install the aforementioned rheometer in accordance with section C.2 of this document. � C.2 Requirements C.2.1 The Contractor shall deliver a quantity of two (2) stress-controlled rheometers with UV cure capability to analyze high-melting materials.� The required lead time for delivery is no more than 14 weeks After Receipt of Order (ARO). The delivery location shall be ARL, Aberdeen Proving Ground, MD 21005. The required stress-controlled rheometer with UV cure capability to analyze high-melting materials shall meet the following salient characteristics:� Rheometer Specifications National Electric Manufacturers Association (NEMA) 5-15 or 5-20 plug for electrical connection Maximum torque greater than or equal to (?) 200 mN?m (milli-Newton-meters), and be capable of applying the maximum torque continuously for at least 15 minutes in steady shear without the need of external circulating fluid for motor cooling. Minimum torque (oscillation) 0.5 nN?m (nano-Newton-meters) or less, minimum torque (shear/rotation): 5 nN?m or less Shall be able to control and measure normal force over a range of 0.005-50 N (Newton), normal force resolution: 0.5 mN (milli-Newton) Oscillation frequency range: 1x10-7 - 100 Hz (Hertz) Angular velocity range: 0 - 300 rad/s (radians per second) The rheometer shall be capable of operating in the following modes: �������� Oscillation Mode Tests:��������� Torque/Stress sweep (linear or log) at single frequency Frequency sweep (linear or log) at single torque Frequency sweep (linear or log) at single strain Strain/angular displacement sweep (linear or log) at single frequency Temperature sweep at single frequency/torque Superimposed stress oscillation and steady shear Superimposed strain oscillation and steady shear Multiple simultaneous frequencies superimposed on above modes Flow Mode Tests: Controlled stress or torque sweeps. Controlled rate (1/s) or speed (rad/s) sweeps. Stress stepped flow. Equilibrium stress stepped flow (ensures material has time to respond to each level of stress). Temperature sweeps at constant stress or rate. Squeeze flow and pull off. Creep Mode (transient) Tests: Constant stress creep and recovery. Automatic sensing of steady state during creep test. Stress growth Stress relaxation (transient) test While running the procedure, succeeding steps can be adapted or new steps added. During measurements, the gap shall automatically adjust for thermal expansion. The rheometer shall correct for residual bearing friction & motor & geometry inertia with the actual inertia measured by the instrument. UV (ultra violet)-cure accessory/attachment, using a broad spectrum mercury lamp as a source, to enable ch originals and two (2) thumb drives of your proposal as detailed in the attached RFP via hand delivery or overnight courier to the address below by no later than 2:00 P.M. Eastern time, on May 18, 2020.� Proposals must be received by this deadline in order to be considered.� ����������� Contracting Officer ����������� Office of Contracting & Personal Property Management ����������� Smithsonian Institution ����������� 2011 Crystal Drive, Suite 350 ����������� Arlington, VA 22202 ����������� Attn:� Susan Engelhardt If you have any questions about this RFP, please submit your questions via email to Susan Engelhardt at engelhardts@si.edu.� Questions must be submitted no later than 5:00 P.M. Eastern time on March 30, 2020 to ensure a response.� Thank you for your interest.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/5c617b7721cf4efea60562a6aba73033/view)
- Record
- SN05702416-F 20200627/200625230146 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |