SAMDaily.us | PRESOL | 65 | Furniture Purchase

SAMDAILY.US - ISSUE OF JULY 18, 2020 SAM #6806
SOLICITATION NOTICE

65 -- Furniture Purchase

Notice Date: 7/16/2020 2:31:50 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 337124 — Metal Household Furniture Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: MEADEMEDDACNS0011
Response Due: 7/21/2020 12:00:00 AM
Archive Date: 01/17/2021
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Awardee: null
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is MEADEMEDDACNS0011 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 337124 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-07-21 15:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Meade, MD 20755 The MICC End User requires the following items, Brand Name Only (Exact Match), to the following: LI 001: 447-OVAL Basket 49 x 27 x 16 Oval Cocktail Table, 1, EA; LI 002: 472-1 Serony Lounge Chair 27x25.5x31, 6, EA; LI 003: A1271.85H +Fin End 85H, 1, EA; LI 004: AER1B23DW +Work Chair,New Aeron,B Size,Std-Hgt Range Adj,Tlt Lim and Seat Angle,Fully Adj Arms,Non-Uphst Armpads, 14, EA; LI 005: CH100.48 +Mora Hanging Cleat, 48W, 1, EA; LI 006: CH105.25 +Mora Cleat Hardware Pack (Qty 25), 1, EA; LI 007: CH230.344824DDBKAAL +Mora To-The-Floor Door Case,Dbl Doors w/Shelf,L/R Hinge,KA,Arc Pull,LPL Case/Frt/Side 34H 48W 24D, 1, EA; LI 008: CH250.2448BH +Mora Plinth Base, Finished, Inset on Both, HPL 24D 48W, 1, EA; LI 009: CH310.364813DSSKAAL +Mora Sloped Top Ovhd Stg, Dbl Door, Standalone, Default Hinge, KA, Arc Pull, LPL 36H 48W 13D, 1, EA; LI 010: CH315.4813H +Mora Sloped Top Panel 48W 13D HPL, 1, EA; LI 011: CH600.24484 +Mora Corian Work Surface, 4H Integrated Backsplash 24D 48W, 1, EA; LI 012: DP1CYS.284872LN +Headway Tapered Shape, Y-Base, Seated Ht Table,sq-edge,28.5"" h,48"" d,72"" w,lam top/thermoplastic edge,no cut, 1, EA; LI 013: DT1CSV.36LS Vary Easy Round Table, squared-edge, 36"" diameter, laminate top/thermoplastic edge, single-column base, 2, EA; LI 014: FF81A.30202L03L @Wood High Credenza w/Doors,Arc Pull,2 1/4H Base, Lam,3/8"" Lam Top,Lock 30W 20D, 2, EA; LI 015: FLC142SFH +Cosm Work Chair, Low Back Hgt, Std Hgt Range, Self Adj Tilt, Fixed Seat Depth, Hgt Adj Arms, 6, EA; LI 016: FT110.3530J +Frame,Base Covers, Pwr/Data knockouts 35H 30W, 1, EA; LI 017: FT110.3536J +Frame,Base Covers, Pwr/Data knockouts 35H 36W, 1, EA; LI 018: FT110.4224J +Frame,Base Covers, Pwr/Data knockouts 42H 24W, 2, EA; LI 019: FT110.4248J +Frame,Base Covers, Pwr/Data knockouts 42H 48W, 1, EA; LI 020: FT110.4618N +Frame,Base Covers, no knockouts 46H 18W, 4, EA; LI 021: FT110.4624N +Frame,Base Covers, no knockouts 46H 24W, 13, EA; LI 022: FT110.6824N +Frame,Base Covers, no knockouts 68H 24W, 4, EA; LI 023: FT110.6836N +Frame,Base Covers, no knockouts 68H 36W, 18, EA; LI 024: FT110.6842N +Frame,Base Covers, no knockouts 68H 42W, 4, EA; LI 025: FT114.1148ATR @Frame Top Screen,Ptd Archtrl Top Cap,Clear Glass 1/4 thick, 11H 48W, 2, EA; LI 026: FT11A.18AP +Frame Top Cap,Archtrl, for single frame,no cutout, pntd 18W, 4, EA; LI 027: FT11A.24AP +Frame Top Cap,Archtrl, for single frame,no cutout, pntd 24W, 17, EA; LI 028: FT11A.36AP +Frame Top Cap,Archtrl, for single frame,no cutout, pntd 36W, 18, EA; LI 029: FT11A.42AP +Frame Top Cap,Archtrl, for single frame,no cutout, pntd 42W, 4, EA; LI 030: FT121.246 +Conn 90,Universal,2way,90 deg-for 46H frames and lower, 18, EA; LI 031: FT128.35 +Connection Hardware, Frame-to-Frame 35H, 1, EA; LI 032: FT128.42 +Connection Hardware, Frame-to-Frame 42H, 2, EA; LI 033: FT128.68 +Connection Hardware, Frame-to-Frame 68H, 13, EA; LI 034: FT12A.1AP +Archtrl Top Cap, Conn 90-Deg, Connects-1 Frame Top Caps Ptd, 18, EA; LI 035: FT12B.235BP +Archtrl Conn Cover 90-Deg, 2 Sides Covered,Base Cover/Flr-Lngth Tiles, Ptd 35H, 1, EA; LI 036: FT12B.246BP +Archtrl Conn Cover 90-Deg, 2 Sides Covered,Base Cover/Flr-Lngth Tiles, Ptd 46H, 17, EA; LI 037: FT12B.307NP +Archtrl Conn Cover 90-Deg, 3 Sides Covered,No Base Ptd 7H, 1, EA; LI 038: FT12B.322NP +Archtrl Conn Cover 90-Deg, 3 Sides Covered,No Base Ptd 22H, 17, EA; LI 039: FT140.06 +Power Entry, External Direct Connect 6'long, 1, EA; LI 040: FT150.24 +Base Power Harness 24W, 2, EA; LI 041: FT150.30 +Base Power Harness 30W, 1, EA; LI 042: FT150.36 +Base Power Harness 36W, 1, EA; LI 043: FT150.48 +Base Power Harness 48W, 1, EA; LI 044: FT155.A +15 Amp Receptacle 4 Circuit, Duplex, Circuit A 6/Pkg, 1, EA; LI 045: FT155.DN +15 Amp Receptacle 4 Circuit, Duplex, Circuit D 6/Pkg, 1, EA; LI 046: FT16A.35BP +Finished End,Archtrl, Base Cover/To-the-floor Tile Foot,Ptd 35H, 1, EA; LI 047: FT16A.42BP +Finished End,Archtrl, Base Cover/To-the-floor Tile Foot,Ptd 42H, 1, EA; LI 048: FT16A.46BP +Finished End,Archtrl, Base Cover/To-the-floor Tile Foot,Ptd 46H, 17, EA; LI 049: FT16A.68BP +Finished End,Archtrl, Base Cover/To-the-floor Tile Foot,Ptd 68H, 9, EA; LI 050: FT170.1118P +Lower Tile, Pntd 11H 18W, 4, EA; LI 051: FT170.1124P +Lower Tile, Pntd 11H 24W, 19, EA; LI 052: FT170.1130P +Lower Tile, Pntd 11H 30W, 1, EA; LI 053: FT170.1136P +Lower Tile, Pntd 11H 36W, 19, EA; LI 054: FT170.1142P +Lower Tile, Pntd 11H 42W, 4, EA; LI 055: FT170.1148P +Lower Tile, Pntd 11H 48W, 1, EA; LI 056: FT170.1918P +Lower Tile, Pntd 19H 18W, 4, EA; LI 057: FT170.1924P +Lower Tile, Pntd 19H 24W, 15, EA; LI 058: FT170.1930P +Lower Tile, Pntd 19H 30W, 1, EA; LI 059: FT170.1936P +Lower Tile, Pntd 19H 36W, 1, EA; LI 060: FT170.1948P +Lower Tile, Pntd 19H 48W, 1, EA; LI 061: FT170V.1124L Vary Easy Lower Tile, 11"" high, 24"" wide, laminate with squared edge and vertical grain, 4, EA; LI 062: FT170V.1136L Vary Easy Lower Tile, 11"" high, 36"" wide, laminate with squared edge and vertical grain, 18, EA; LI 063: FT170V.1142L Vary Easy Lower Tile, 11"" high, 42"" wide, laminate with squared edge and vertical grain, 4, EA; LI 064: FT170V.3030L Vary Easy Lower Tile, 30"" high, 30"" wide, laminate with squared edge and vertical grain, 2, EA; LI 065: FT170V.3036L Vary Easy Lower Tile, 30"" high, 36"" wide, laminate with squared edge and vertical grain, 1, EA; LI 066: FT174.24 +Tile,Lower Open 24W, 4, EA; LI 067: FT174.36 +Tile,Lower Open 36W, 18, EA; LI 068: FT174.42 +Tile,Lower Open 42W, 4, EA; LI 069: FT180V.3724L Vary Easy Full Height Tile, 37"" high, 24"" wide, laminate with squared edge and vertical grain, 2, EA; LI 070: FT180V.3748L Vary Easy Full Height Tile, 37"" high, 48"" wide, laminate with squared edge and vertical grain, 1, EA; LI 071: FT180V.4124L Vary Easy Full Height Tile, 41"" high, 24"" wide, laminate with squared edge and vertical grain, 13, EA; LI 072: FT181.0724T +Upper Tile, Tackable Fabric 07H 24W, 2, EA; LI 073: FT181.0748T +Upper Tile, Tackable Fabric 07H 48W, 1, EA; LI 074: FT181.1118T +Upper Tile, Tackable Fabric 11H 18W, 4, EA; LI 075: FT181.1124T +Upper Tile, Tackable Fabric 11H 24W, 13, EA; LI 076: FT181.3324T +Upper Tile, Tackable Fabric 33H 24W, 4, EA; LI 077: FT181.3336T +Upper Tile, Tackable Fabric 33H 36W, 18, EA; LI 078: FT181.3342T +Upper Tile, Tackable Fabric 33H 42W, 4, EA; LI 079: FT181V.3324L Vary Easy Upper Tile, 33"" high, 24"" wide, laminate with squared edge and vertical grain, 4, EA; LI 080: FT181V.3336L Vary Easy Upper Tile, 33"" high, 36"" wide, laminate with squared edge and vertical grain, 16, EA; LI 081: FT181V.3342L Vary Easy Upper Tile, 33"" high, 42"" wide, laminate with squared edge and vertical grain, 4, EA; LI 082: FT190.35 +Wall Start 35H, 1, EA; LI 083: FT19C.08 @Cable Management Channel 8W, 30, EA; LI 084: FT280.72LA +Trans Surf, Sq-Edge Lam Top/Thermo Edge Surf, Ptd Archtrl Top Cap 72W, 1, EA; LI 085: FT290.24L +Surface Cantilever, for 20""-or 24"" deep surface,lft-hnd, 9, EA; LI 086: FT290.24R +Surface Cantilever, for 20""-or 24"" deep surface,rt-hnd, 9, EA; LI 087: FT29B.2 +Surface Ganging Bracket,pair, 1, EA; LI 088: FT2A1.24FL +Open Support,Archtrl Foot,Frame-Att,Fxd Hght,Lft 24D, 5, EA; LI 089: FT2A1.24FR +Open Support,Archtrl Foot,Frame-Att,Fxd Hght,Rt 24D, 6, EA; LI 090: FT2A2.A24FS +Open Support Leg,Archtrl Foot,Pen/D-Shpd Surf Attchd,Inset, for 24""D Peninsula,Fxd Hght,Non-Hnded Support, 4, EA; LI 091: FTS10.2442LF +Rectangular Surface,Sq-Edge, Lam Top/Thermo Edge, 24D 42W, Frame Atch, 4, EA; LI 092: FTS10.2466LF +Rectangular Surface,Sq-Edge, Lam Top/Thermo Edge, 24D 66W, Frame Atch, 1, EA; LI 093: FTS10.2472LF +Rectangular Surface,Sq-Edge, Lam Top/Thermo Edge, 24D 72W, Frame Atch, 10, EA; LI 094: FTS35.2454LF +Peninsula Surf,Round End,Sq-Edge, Lam Top/Thermo Edge, 24D 54W, Frame Atch, 1, EA; LI 095: FTS35.2460LF +Peninsula Surf,Round End,Sq-Edge, Lam Top/Thermo Edge, 24D 60W, Frame Atch, 1, EA; LI 096: FTS35.2466LF +Peninsula Surf,Round End,Sq-Edge, Lam Top/Thermo Edge, 24D 66W, Frame Atch, 2, EA; LI 097: FV43H.F81524LWTL @Ovhd Stg Cab, Hinged Doors, Canvas Frm Connect, Lam Case/Doors, Finished Case Top, Lock, 15H 24W, 4, EA; LI 098: FV43H.F81536LWTL @Ovhd Stg Cab, Hinged Doors, Canvas Frm Connect, Lam Case/Doors, Finished Case Top, Lock, 15H 36W, 18, EA; LI 099: FV43H.F81542LWTL @Ovhd Stg Cab, Hinged Doors, Canvas Frm Connect, Lam Case/Doors, Finished Case Top, Lock, 15H 42W, 4, EA; LI 100: FV694.A12A42 +Screen,Translucent Plastic, 12"" below WS, 42W, 1, EA; LI 101: FV694.A12A48 +Screen,Translucent Plastic, 12"" below WS, 48W, 1, EA; LI 102: FV694.A12A54 +Screen,Translucent Plastic, 12"" below WS, 54W, 2, EA; LI 103: FV696.34 +Stiffener, 33 7/8W, 1, EA; LI 104: FV696.43 +Stiffener, 43 1/4W, 1, EA; LI 105: FV696.48 +Stiffener, 48W, 2, EA; LI 106: G6160.BB +Twist LED Task Light,Starter unit,Brkt Att, 13, EA; LI 107: G6160.CB +Twist LED Task Light,Add-on unit,Brkt Att, 13, EA; LI 108: KNN4FP +Keyn Chair, 4-Leg Base, Fully Upholstered, Fixed Arms, 22, EA; LI 109: LQ11D.20BBF +Ped Arc Pull,Mobile,Ptd Mtl Frnt, 20D B/B/F, 14, EA; LI 110: LQ11D.20FF +Ped Arc Pull,Mobile,Ptd Mtl Frnt, 20D F/F, 14, EA; LI 111: LQ20D.423 +Lat File,Arc Pull Freestd,Ptd Mtl Frnt, 3 Dwr 42W, 1, EA; LI 112: LTPL-04220 @Tu File Top, Lam Top/TP Edge 42W 20D, 1, EA; LI 113: SA808867 Vary Easy Full Height Tile, 4, EA; LI 114: WC410N +Caper Stacking Chair, Molded Seat, No Arms, 2, EA; LI 115: TECHNICAL DRAWING, 1, EA; LI 116: INSTALLATION, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf ""AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."" ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/5208edaad3fa4687af2cd66973df729c/view)
Place of Performance: Address: Fort Meade, MD 20755, USA; Zip Code: 20755; Country: USA
Record: SN05723906-F 20200718/200716230202 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

65 -- Furniture Purchase