Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF JULY 25, 2020 SAM #6813
SOLICITATION NOTICE

69 -- Shooting Targets

Notice Date

7/23/2020 10:06:59 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

928110 — National Security
 

Contracting Office

W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
 

ZIP Code

13602-5220
 

Solicitation Number

JBLMAJ0001
 

Response Due

8/7/2020 12:00:00 AM
 

Archive Date

02/03/2021
 

Point of Contact

Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
 

E-Mail Address

marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Awardee

null
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is JBLMAJ0001 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 928110 with a small business size standard of 0.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-08-07 12:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be JBLM, WA 98433 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: USPSA Cardboard Target - 100 Pack Highlights: This listing is for a pack of 100 USPSA cardboard targets Official USPSA License #CT-303 Scoring lines are perforated through for easy and accurate target scoring Overall dimensions 29.93"" tall x 18.12"" wide Tan front / white back 200 lb. test cardboard with vertical ""B"" flutes per USPSA specifications Water resistant additive helps reduce delamination and warping in wet conditions Chemical additive does not change the look or feel of the cardboard (target pasters stick with no problem) Description: Our USPSA Cardboard Targets were inspected and approved by the United States Practical Shooting Association in 2019. The scoring zones are perforated through which is preferred by most match directors and range officers because it allows the targets to be scored faster and more accurately. These targets include a special water resistant additive that helps prevent warping and delamination in wet conditions. The chemical additive is not a wax coating and does not adversely effect the adhesion of target pasters. Our USPSA targets are boxed for shipping to ensure they arrive in good condition. Note: These targets were previously referred to as IPSC Metric Targets. Specifications: Material: 200 lb. test cardboard with vertical ""B"" flutes Size: Overall dimensions 29.93"" tall x 18.12"" wide Water Resistance: Water resistant additive helps reduce delamination and warping in wet conditions, 30, 61.75; LI 002: IPSC Rifle (A) Zone Flapper Target - Armor Post Highlights Ultra durable PATENT PENDING design has no welds Rated for most handguns and rifles Maximum velocity at the target = 3,000 fps | Maximum energy at the target = 2,300 ft-lbs Tested extensively with 9mm, .40S&W, .45ACP, .223 Remington, 7.62x39, and 7.62x51 NATO Minimum distance: Handguns = 7 yards | Rifles = 100 yards Laser cut 3/8"" thick AR500 steel target assembly fits onto our AR500 armor upright post Heavy duty legs constructed of 1/4"" steel with durable black powder coat finish Target base has a 35"" diagonal footprint that is elevated in the center to provide excellent stability Vertical post is 3/8"" thick AR500 steel Outer plate size matches the A, B, C zone of an official IPSC / USPSA metric target (11.81"" x 23.62"") Reduced ""A"" zone flapper window measures 4"" wide x 7-1/4"" long Target is designed to safely deflect bullet fragments into the ground (adjustable forward angle: 0-15 degrees) Description Our IPSC ""A"" Zone Flapper Target is built to take a beating and keep coming back for more. All hinge brackets are laser cut from abrasive resistant, through hardened, AR500 steel. Designed without welds, all plates and components are reversible to maximize their useful life. The outer plate size matches an official IPSC or USPSA target with the ""D"" zone removed. Shoot through the 4""x7"" opening and you'll hear a distinctive ring as the paddle bounces back for positive hit detection. Ideal for handgun, rifle and shotgun training and competition. The upright post is made from 3/8"" AR500 steel and will withstand thousands of direct hits from high power rifles. The base of the target incorporates an innovative four point stance which elevates the center of the target, dispersing the weight to the outer four corners for excellent stability. The stand legs include anchor holes for staking if extra stability is needed (stakes not included). Our Armor Post Targets are built for law enforcement, military, commercial and public ranges who require a maintenance free solution for high volume pistol and rifle use. Specifications Outer Plate: Metric = (30cm x 60cm) | Standard = (11.81""x23.62"") x 3/8"" thick AR500 steel - unpainted Flapper Plate: Window dimensions = 4"" wide x 7.25"" long | Flapper plate is 3/8"" thick AR500 steel - unpainted Armor Post: 3/8"" thick x 2"" wide AR500 steel - unpainted Stand Construction: 1/4"" thick steel with black powder coat finish Stand Dimensions: 27"" long x 22"" wide (35"" diagonal) Overall Height: 63.25"" tall (height can vary depending on the forward lean angle) Product Weight: 64 lbs., 5, 399.99; LI 003: IPSC 66% Rifle Target - Armor Post Highlights Rated for all handguns and rifles with velocities up to 3,000 fps at the target Minimum distance: Handguns = 7 yards | Rifles = 100 yards Laser cut AR500 steel target assembly slips onto 3/8"" AR500 Armor Post with no tools Heavy duty legs constructed of 1/4"" steel with durable black powder coat finish Target base has a 35"" diagonal footprint that is elevated in the center to provide excellent stability Industrial grade compression springs produce maximum reverberation and visual feedback Plate size matches an IPSC Metric target scaled down to 66% of the official size (11.81""x19.39"") Target is designed to safely deflect bullet fragments into the ground (adjustable forward angle: 0-15 degrees) Overall height of target is adjustable from 54"" to 58"" Light weight and portable (weighs only 44 lbs.) Description Our new line of Armor Post Targets provide an unmatched combination of durability and portability. The upright post and legs weigh only 22 lbs. The built-in quick release mechanism allows target plates to be removed in seconds without tools. The upright post is made from 3/8"" AR500 steel and will withstand thousands of direct hits from high power rifles. Our Armor Post Targets are built for law enforcement, military, commercial and public ranges who require a maintenance free solution for high volume pistol and rifle use. Our duel spring design maximizes audible feedback and keeps the surface of the target plate parallel with the shooting line which makes bullet fragmentation safer and more consistent. The springs also absorb energy which preserves the surface of the steel plate. The reversible target plate matches an official IPSC or USPSA metric target scaled down to 66% of the official size. Each successful hit produces a loud ring and visual reaction. The base of the target incorporates an innovative four point stance which elevates the center of the target dispersing the weight to the four outer corners for excellent stability. The stand legs include anchor holes for staking if extra stability is needed (stakes not included). The rear mounting hole on the upright post is slotted to allow the user to adjust the forward lean of the target on uneven terrain (0-15 degrees). Specifications Target Plate: 19.39"" tall x 11.81"" wide x 3/8"" thick AR500 steel - unpainted Armor Post: 3/8"" thick x 2"" wide AR500 steel - unpainted Base Construction: 1/4"" thick steel with black powder coat finish Base Dimensions: 27"" long x 22"" wide (35"" diagonal) Overall Height: Adjustable 54""-58"" Product Weight: 44 lbs., 3, 279.99; LI 004: 12"" Round Rifle Target - Armor Post Highlights Rated for all handguns and rifles with velocities up to 3,000 fps at the target Minimum distance: Handguns = 7 yards | Rifles = 100 yards Laser cut AR500 steel target assembly slips onto 3/8"" AR500 Armor Post with no tools Heavy duty legs constructed of 1/4"" steel with durable black powder coat finish Target base has a 35"" diagonal footprint that is elevated in the center to provide excellent stability Industrial grade compression springs produce maximum reverberation and visual feedback 12"" round x 3/8"" thick target plate is reversible for extended life Target is designed to safely deflect bullet fragments into the ground (adjustable forward angle: 0-15 degrees) Light weight and portable (weighs only 35 lbs.) Description Our new line of Armor Post Targets provide an unmatched combination of durability and portability. The upright post and legs weigh only 22 lbs. The built-in quick release mechanism allows target plates to be removed in seconds without tools. The upright post is made from 3/8"" AR500 steel and will withstand thousands of direct hits from high power rifles. Our Armor Post Targets are built for law enforcement, military, commercial and public ranges who require a maintenance free solution for high volume pistol and rifle use. Our duel spring design maximizes audible feedback and keeps the surface of the target plate parallel with the shooting line which makes bullet fragmentation safer and more consistent. The springs also absorb energy which preserves the surface of the steel plate. Each successful hit on the 12"" round plate produces a loud ring and visual reaction. The base of the target incorporates an innovative four point stance which elevates the center of the target dispersing the weight to the four outer corners for excellent stability. The stand legs include anchor holes for staking if extra stability is needed (stakes not included). The rear mounting hole on the upright post is slotted to allow the user to adjust the forward lean of the target on uneven terrain (0-15 degrees). Specifications Target Plate: 12"" diameter x 3/8"" thick AR500 steel - unpainted Armor Post: 3/8"" thick x 2"" wide AR500 steel - unpainted Base Construction: 1/4"" thick steel with black powder coat finish Base Dimensions: 27"" long x 22"" wide (35"" diagonal) Overall Height: 48"" Product Weight: 39 lbs., 3, 249.99; LI 005: Full Size Human Silhouette Rifle Target - Armor Post Highlights Rated for all handguns and rifles with velocities up to 3,000 fps at the target Minimum distance: Handguns = 7 yards | Rifles = 100 yards Laser cut AR500 steel target assembly slips onto 3/8"" AR500 Armor Post with no tools Heavy duty legs constructed of 1/4"" steel with durable black powder coat finish Target base has a 35"" diagonal footprint that is elevated in the center to provide excellent stability Industrial grade compression springs produce maximum reverberation and visual feedback Human silhouette plate measures 32"" tall x 18"" wide x 3/8"" thick and is reversible for extended life Target is designed to safely deflect bullet fragments into the ground (adjustable forward angle: 0-15 degrees) Overall height of target is adjustable from 57"" to 63"" Light weight and portable (weighs only 64 lbs.) Description Our new line of Armor Post Targets provide an unmatched combination of durability and portability. The upright post and legs weigh only 22 lbs. The built-in quick release mechanism allows target plates to be removed in seconds without tools. The upright post is made from 3/8"" AR500 steel and will withstand thousands of direct hits from high power rifles. Our Armor Post Targets are built for law enforcement, military, commercial and public ranges who require a maintenance free solution for high volume pistol and rifle use. Our duel spring design maximizes audible feedback and keeps the surface of the target plate parallel with the shooting line which makes bullet fragmentation safer and more consistent. The springs also absorb energy which preserves the surface of the steel plate. The life-like human silhouette shape provides a realistic experience for tactical pistol and rifle training. The width of the target measures 18"" across the shoulders which is suitable for range estimating with most tactical scope reticles. Each successful hit produces a loud ring and visual reaction. The base of the target incorporates an innovative four point stance which elevates the center of the target dispersing the weight to the four outer corners for excellent stability. The stand legs include anchor holes for staking if extra stability is needed (stakes not included). The rear mounting hole on the upright post is slotted to allow the user to adjust the forward lean of the target on uneven terrain (0-15 degrees). Specifications Target Plate: 32"" tall x 18"" wide x 3/8"" thick AR500 steel - unpainted Armor Post: 3/8"" thick x 2"" wide AR500 steel - unpainted Base Construction: 1/4"" thick steel with black powder coat finish Base Dimensions: 27"" long x 22"" wide (35"" diagonal) Overall Height: Adjustable 57""-63"" Product Weight: 64 lbs., 3, 349.99; LI 006: Duel Moving Target Training Package Highlights This duel moving target system creates random, lifelike motion of two independent targets Compatible with all handguns and rifles No battery, motors or pneumatic power is required Movement is generated randomly using wind or by instructor discretion using rope Each unit weighs less than 50 lbs. and sets up in minutes without tools Accepts standard IDPA and IPSC style cardboard targets Package includes(3) silhouette cut tactical targets for ultimate realism All-weather design with powder coat finish and stainless steel tracks Adjustable leveling feet allow target to be used on uneven terrain and hillsides (up to 15 degree slopes) Quick release hand knobs allow targets to be changed quickly with no tools Invaluable training tool for SWAT entry, hostage rescue, sniper and active shooter training Description Add a new dimension to your firearms training program. This Duel Moving Target System creates incredible, lifelike movement of your cardboard targets. Use the system to simulate hostage situations, run active shooter drills, create shoot / no-shoot scenarios, run sniper training courses... the possibilities are endless. Simply staple a strip of cardboard (the sail) to the back of the targets and let our patent pending counterbalance technology do the rest. When light or moderate winds catch the ""sail"", the targets will move randomly in both directions. Add rope (not included) to manually control the target movement. The simplistic design requires NO electricity, batteries, air lines, motors, or wiring. It is completely maintenance free and reliable. Specifications System Dimensions: Each system is 15� wide x 19� deep x 6'� tall (with cardboard targets installed) Weight: Each system weights 51 lbs. Base and Rocker Assembly: 12 gage & 7 gage steel with black powder coat finish Hardware: stainless steel and zinc plated steel, 2, 998.00; LI 007: IPSC Target Harmonic (A) Zone - Static Stand Highlights Industry first, PATENT PENDING design allows shooter to audibly identify shot placement Rated for all non-magnum handguns (minimum distance 10 yards) Overall size matches USPSA / IPSC metric target with ""D"" zone removed (overall = 11.81""x23.62"") Inner head and chest cavities match USPSA / IPSC ""A"" Zones Shots to the ""B"" and ""C"" zones produce dull, low frequency sound Shots to the ""A"" zone cavities produce a loud, high frequency sound Reversible target plates for extended life Heavy duty Static Stand constructed of 1/4"" steel with durable black powder coat finish Post mount is adjustable so the target can be leveled on uneven terrain Static Stand design has a 34"" diagonal footprint that is elevated in the center to provide excellent stability Safely deflects bullet fragments into the ground (read all safety guidelines before use) Light weight and portable (weighs only 46 lbs) Description Our new PATENT PENDING Harmonic Target is the ultimate handgun training target. By combining the durability of a steel target, with the precision scoring of a paper target, this revolutionary design is ideal for competition and defensive handgun training. The overall size of the steel matches a standard IPSC / USPSA metric target with the ""D"" zone removed. The outer plate is laser cut from 3/8"" thick AR500 steel and is ridged mounted to our 2x4 post sleeve. The inner plate is laser cut from 1/4"" thick AR500 steel and includes integrated tuning forks that are concealed behind the front plate. The inner, Harmonic Plate, is mounted using industrial grade die springs. Bullets that strike the outer ""B"" and ""C"" zones produce a dull, low frequency ring. Shots that pass through the ""A"" zone windows in the front plate, strike the Harmonic Plate and produce a loud, high frequency ring allowing the shooter to instantly identify their shot placement. Other steel targets with hinged doors and windows are less suitable for competition and defensive handgun training. These designs condition the shooter to pause while the hinged door falls back into place. Our Harmonic Plate is mounted in a fixed position so it's always ready for rapid follow-up shots. Specifications Outer Target Plate: Metric = (30cm x 60cm) | Standard = (11.81"" x 23.62"") x 3/8"" thick AR500 steel - unpainted Inner Harmonic Plate : Metric = (15cm x 28cm) | Standard = (5.9""x11"") x 1/4"" thick AR500 steel - unpainted Stand Construction: 1/4"" thick steel with black powder coat finish Stand Dimensions: 27"" long x 22"" wide (35"" diagonal footprint) Product Weight: 46 lbs., 2, 324.99; LI 008: Commercial Grade Double Swinger Highlights: This system includes two adjustable target holders that swing independently Commercial Grade target designed for competition use and tactical training Target holders use a counterweight & precision pillow bearings to swing targets left & right Adjustable counterweights allow shooter to set the targets to swing at different speeds 5/16"" thick steel angle iron base provides a sturdy, bullet resistant target platform Adjustable width for law enforcement style or IDPA / IPSC targets (18""-24"") Stand legs are elevated in the center providing excellent stability on uneven terrain Spring loaded tubes and thumb screws secure 1x2 wood furring strips in both directions Durable black paint / powder coat finish Weight = 70 lbs. Cardboard and paper targets are not included Wood furring strips are not included Description: Challenge Targets Commercial Grade Double Swinger Target is built to the highest quality standards using superior components and materials to provide the ultimate gravity moving target system. The width of the target holders are adjustable allowing shooters to utilize standard targets and backers ranging from 18"" to 24"" wide. The target holders include spring loaded tubes and thumb screws to snugly secure your 1x2 wood furring strips. The vertical post of the target is designed using 5/16"" thick angle iron steel. This provides a sturdy, durable platform which maximizes the duration of the pendulum motion and is durable enough to deflect errant shots from magnum caliber handguns without taking damage. The counterweight positions are adjustable allowing the stage designer to set the speed at which each target swings. The target utilizes four sealed pillow bearings which will provide years of maintenance free use on outdoor ranges. The target holder subassemblies slide onto precision machined, hard chrome plated shafts and are each secured by a single bolt making the target easy to transport in three sections. The utilization of these premium components allows these targets to swing for over 2.5 minutes after activation! This allows for some very creative stage designs in competition shooting and tactical training excercises. For ultimate durability, consider adding our SWINGER ARMOR GUARD to protect the bearings and furring strip brackets from errant shots. Specifications: Vertical Frame: 5/16"" thick steel angle iron - black paint with white ""challenge TARGETS"" logo Legs: 1/4"" thick steel with black powder coat finish Furring Strip Brackets: 7 gage steel with black powder coat finish Counterweight Mounting Arms: 1/4"" AR500 steel - bare steel, ships unpainted Shafts: 1"" diameter solid steel shaft with zinc plated finish Stand Dimensions: Height from ground to top of furring strip tubes = 26"" Footprint Dimensions: 27"" wide x 27"" long | 37"" diagonal footprint Weight: 70 lbs., 2, 465.00; LI 009: Propeller Texas Star w/ 8"" Plates Highlights PATENT PENDING design by Challenge Targets Rated for handguns, rifles and shotguns Maximum velocity at the target = 3,000 fps Maximum energy at the target = 1,300 ft/lbs Minimum shooting distance (handguns = 10 yards / rifles = 100 yards) Includes (6) 8"" diameter x 3/8"" thick AR500 plates Spring retention system makes resetting the target quick and easy Robust design intended for high volume commercial use Target stands 6' 8"" tall at the highest point when crossbar is oriented vertically Heavy gauge cover protects pillow bearings from falling plates Precision machined shafts are zinc plated for weather resistance Includes (6) industrial grade, maintenance free, sealed pillow bearings AR500 components (Plates, Crossbar, Arms & Hubs) ship unpainted All other components are powder coated or liquid painted black Description This is our most challenging moving target yet! With three independently rotating axes, it's nearly impossible to predict the path of these targets. The 8"" plates are held in place with the same spring retention system used on our proven Texas Star platform. When shot, the plates are released from the retention pocket and fall to the ground. The change in weight distribution causes the crossbar and plates to rotate. The precision machined shaft and pillow bearings maximize the speed and change of direction with each successful shot on the plates. After initial assembly, the Propeller Target is transported in four sections with the heaviest component weighing only 54 lbs. Setting up the target is simple and requires only three bolts to complete the assembly in the field. Resetting the target is quick and simple. Just lift the spring and insert the stem of the plate into the pocket. One person can reset all six plates in about 1 minute. The PROPELLER is our ""spin"" on a competition target commonly known as an Irish Plate Rack. These target systems have been used in 3-Gun and USPSA matches for years but also have applications in tactical and law enforcement training. This system satisfies many agency's requirement for training on moving targets. Specifications Overall Height: 6' 8"" tall (maximum height from the ground to the top edge of the upper plate) Target Plates (6): 8"" diameter x 3/8"" thick AR500 steel (ship unpainted) Horizontal Crossbar (1): 3/8"" thick AR500 steel (ships unpainted) Arms (6): 3/8"" thick AR500 steel (ships unpainted) Hubs (3): 3/8"" thick AR500 steel (ships unpainted) Structural Vertical Post (1): 5/16"" thick A36 angle iron with black powder coat finish Other Components: Fabricated brackets, covers, etc. are provided with a black powder coat finish Total Product Weight: 166 lbs (Transports in 4 sections) 1) Stand, Post and Bearing Housing = 54 lbs. 2) Crossbar w/ Propeller Bearing Assemblies = 32 lbs. 3) Propeller Hub = 23 lbs. (each) 4) Target Plates = 34 lbs., 2, 985.00; LI 010: Extreme Hostage Target Highlights This system creates random, lifelike movement of a threat target behind a stationary hostage target. Compatible with all handguns and rifles. No battery or pneumatic power is required. Movement is created using wind and our patent pending counterbalance technology. Target movement can also be manually controlled by rope. Portable, 50lb. system, transports in two sections and sets up in minutes without tools. System includes everything shown except cardboard targets and wood articles. Accepts standard IDPA and IPSC cardboard targets. Purchase our silhouette cut tactical targets for ultimate realism (see Related Items bottom of page). Most Law Enforcement targets are compatible but may require trimming to reduce weight. All-weather design with powder coat finish and stainless steel tracks. Capable of year-round outdoor use. Adjustable leveling feet allow target to be used on uneven terrain and hillsides (up to 15 degree slopes). Quick release hand knobs allow targets to be changed quickly. Invaluable training tool for SWAT entry, hostage rescue, and sniper teams. Description Use the Extreme Hostage Target to generate incredible, lifelike movement of your cardboard targets. Excellent for all types of hostage simulation and decision making drills. Simply staple a strip of cardboard (the sail) to the back of the moving target and let our patent pending counterbalance technology do the rest. When light or moderate winds catch the ""sail"", the target will move randomly in both directions. A second system can be added to generate random movement of both the hostage and the threat target. Add rope (not included) to manually control the target movement. For tactical training, the rope can be used to generate unpredictable left and right movement of the target. For competitions, the rope can be used to create consistent exposure in one direction so each shooter has an equal opportunity to engage the target. The exposure duration can be adjusted from approximately 2-5 seconds. In this application, the system automatically resets itself to the concealed position after each presentation. Specifications System Dimensions: 15� wide x 19� deep x 6'� tall (with cardboard targets installed) Weight: 51 lbs. Base and Rocker Assembly: 12 gage & 7 gage steel with black powder coat finish Hardware: stainless steel and zinc plated steel, 2, 499.00; LI 011: 8"" Auto Reset Target (Rated up to 7.62x51) Highlights US PATENT NO. 8,534,673 Target is pictured with optional Front Armor Guard. Rocker and base will require alternate ballistic protection if the Front Armor Guard is not utilized. Rated for handguns & rifles with a maximum velocity of 3,000 fps and 1,300 ft/lbs. of energy at the target. Tested extensively with the following calibers: 9mm, .40 S&W, .45 ACP, 5.56mm, 7.62x39, 7.62x51. Modular system sets-up and breaks-down in seconds with no tools for quick and easy deployment. 8"" diameter x 20"" tall 3/8"" thick AR500 target plate is reversible for extended life. Reactive steel target falls completely back and resets itself after a 1-4 second delay. No battery or pneumatic power is required. Target resets using a patented counterbalance technology. All-weather, waterproof design is capable of year-round outdoor use. Adjustable leveling feet allow target to be used on uneven terrain. Description For years, the shooting community has been searching for a low maintenance, falling target system that automatically resets and provides indisputable hit detection with a satisfying shot response and satisfactory reset time. Some manufacturers have attempted to meet these objectives by utilizing an electric motor to lift the plate. Other manufacturers try to accomplish the task by utilizing pneumatic power to reset the target. These systems require motors, gears, batteries, wiring harnesses, air lines, compressors, air tanks, etc. to reset the target. They are expensive to manufacture and require ongoing daily maintenance to keep them in service. Many cheaper systems utilize springs to reset the target plate. Shooters often complain that spring reset targets do not produce a satisfactory reaction and it is often difficult to identify successful hits. Smaller calibers will barely move the target while more powerful calibers drop the target so fast it resets itself before the shooter can recover from the recoil and get their scope back on the target to confirm the hit. Our Extreme Reactive Targets meet all of the design objectives by utilizing a patented, maintenance free counterweight technology. Our design requires no power source, has no limitations regarding the number of resets and provides a satisfying, unmistakable response when shot. (WATCH THE VIDEO DEMONSTRATION BELOW) Target plate: 8"" diameter x 20� x 3/8"" thick AR500 steel plate � unpainted System Dimensions: 15� wide x 19� deep x 31� tall. Weight: 73 lbs. Base and Rocker Assembly: 7 gage steel, & 12 gage steel with black powder coat finish Hardware: stainless steel and zinc plated steel, 4, 599.99; LI 012: Stand Alone Armor Guard - 3/8"" AR500 Steel Heighlights Popular accessory for our Extreme Reactive Targets Free standing guard protects the target system from errant shots. 3/8"" thick AR500 steel construction (AR500 steel ships unpainted) Ballistic material provides full protection for all handguns and rifle rounds up to .308 Winchester. Deflects stray bullets safely to the ground to prevent damage to the target base or rocker. Description The Stand Alone Front Armor Guard accessory is placed in front of the Extreme Reactive Target to provide ballistic protection for handguns and rifles up to .308 Winchester (7.62 x 51). The angular design deflects missed shots safely to the ground preventing damage to the target mechanism. Specifications Assembled Dimensions: 18"" wide x 16"" tall x 12"" deep Construction: 3/8"" thick AR500 plate (ships unpainted) Hardware: Grade 8 carriage bolts with nylon lock nuts (zinc plated) Weight: 43 lbs., 4, 199.00; LI 013: VTAC Double Sided Paper Target Highlights Double sided paper target designed by Viking Tactics Printed on extra heavy sheet Target measures 23""x35"" (Fits our TS100 and TS200 Target Stands) Vivid white on black contrast provides clear target distinction out to 300 yards Description Side #1 Outlined human silhouette includes vitals and scoring zones for pelvic, chest and head regions. White on black color scheme allows shooters to identify and hold on human silhouette out to 300 yards. Side #2 Includes (4) SR1-C bullseye targets with 1"" gridlines. Perimeter of target includes numbered shapes for on command training drills. Specifications Dimensions: 23"" wide x 35"" tall, 5000, .49; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at...
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/d8b8d426349541f3b11b2bb3ef7c93bd/view)
 

Place of Performance

Address: JBLM, WA 98433, USA

Zip Code: 98433

Country: USA
 

Record

SN05731981-F 20200725/200723230152 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |