SOURCES SOUGHT
66 -- Amonia Anaylzer
- Notice Date
- 9/2/2020 2:10:15 AM
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- USDA APHIS AMES IA 50010 USA
- ZIP Code
- 50010
- Solicitation Number
- 2020-ss96
- Response Due
- 9/9/2020 7:00:00 AM
- Archive Date
- 09/24/2020
- Point of Contact
- sarah schauf, Phone: 5153377572
- E-Mail Address
-
sarah.c.schauf@usda.gov
(sarah.c.schauf@usda.gov)
- Description
- Sources Sought Notice Ammonia Analyzer This SOURCES SOUGHT NOTICE. 2020-SS99. �The purpose of this sources sought notice is to determine the interest and feasibility of small business set-asides. This synopsis is for information and planning purposes and is not to be construed as a commitment by the U.S. Government, nor will the U.S. Government pay for information solicited. The information from this notice will help the United States Department of Agriculture, USDA, Animal Plant Inspection Services, APHIS, National Veterinary Services Laboratory, NVSL, Ames, Iowa plan their acquisition strategy or plan. PLEASE NOTE THAT THIS IS NOT A REQUEST FOR PROPOSAL, NO SOLICITATION EXISTS AT THIS TIME. G2103 Amrronia (NH3 ) Concentration Analyzer in Ai S0942 extended concentration range (0-50ppmv) C0360 Desiccant Drier kit S1021 Particulate filter teflon Specifications/Must Have: Portable instantaneou s NH3, CO2 and H20 analyzer: Required minimum specifications Provides measurements ofNH3, CO2 and H20 mole fractions The analyzer must be a commercially available, single-un it system capable of measuring NH3 concentration, with a lower detection limit� (5 min., 3cr) of� <0.09� ppb (0.07 �g/m3)� and a precis ion (5 min., lo) of 0.03 ppb + 0.1% of reading The analyzer is required to have guaranteed, tested, certified and quoted zero drift specification n (pea k to peak, 50min average) over a measurement interval of 72 hrs / I month of� 0.15 I� 0.5 ppb The analyze r must be capable of operating within guaranteed specifications with a sample humidity of < 99 % R.H. non-conde nsi ng @ 40 �C, no drying required The analyze r must be capable of reporting both wet and dry mole fraction value s for NH3, requiring the simultaneous measurement nt of H2O mole fraction in the sample gas C ross - interference with water vapor when measuring NH3 at ambient concentrations must be quantified and corrected resulting in reported mole fractions with in the uncertainty of the ambient mole fraction standards over a wide range of water concentrations. Water cross-interference correction described in previous bullet must be verified for the following: NH3 in the I 0.2 nmo l mo t- 1 to 215 nmol mo- t 1 regime with relative humidities� in the range : 0%,� 40%, 50%, 60% and 70%. Performance validation of the analyze r should be simple and easy by mea ns of a surrogate gas like CO2 The analyze r is required to have a physical sample cavity volume less than 35 ml allowing for extremely fast gas sample throughput and minima l memory at a flow rate as low as 1.5 L / min . The analyzer must weigh less than 28 kg, including vacuum pump, for ease of field deployability. There must be no laser light injected into the cavity during data acquisition as this would add significant noise to the ring down signal. The analyze r must have the following attributes to facilitate field maintenance and continued performance: Two sub- micron filters; one that is customer changeable, and one that is permanent to protect the sample cavity from contamination during filter changes. Optics that are permanently precision-aligned in a clean room environment, so� that optics� do� not need to be removed and cleaned by users in an environment that exposes the sample cavity to contami nants. The analyzer must be temperature stabilized to within +/- 0.005 �C and pressure stabilized to within +/- 0.0002 atmospheres in order to ensure to ensure spectroscopic stability and lo w-drift performance. The analyzer must be su bject to a vibration te st on two axes at 25 Hz, 1 gp-p accele ratio n for 1 5 minutes , a and continue to operate as specified. The analyzer shall withstand a drop test from a 4"" height along 12 edges (x, y and z axes) with 2 drops on each edge. Please submit the following information: �Name and address of company 2. �Relevant past performance, including �Contract name � �Contracting Agency or Department Yearly contract value � �Description of work and how it relates to the requirements DUNNS number and business size (the NAICS code is 334516 Submission requirements: Interested small business firms responding to this market survey must provide a capability statement demonstrating their experience, skills and capability to fulfill the Governments requirements for the above in accordance with Federal Acquisition Regulation (FAR) 19.502-2(b). Please specify one primary and one alternate Point of Contact (POC) within your firm, including telephone numbers and email addresses Only electronic copies of capability statements will be accepted and should be emailed to: sarah.c.schauf@usda.gov The e-mail shall contain the following subject line: Response to Sources Sought Notice � Analyzer 2020-SS96. . A determination by the Government to proceed with the acquisition as a set-aside is within the discretion of the Government. If capability statements are not received from at least two (2) responsible small businesses or if the Government determines that no small business concerns are capable of performing this requirement based upon an assessment of the capability statements submitted, the Government may proceed with a full and open competition. Please submit all information to Submission requirements: Interested small business firms responding to this market survey must provide a capability statement demonstrating their experience, skills and capability to fulfill the Governments requirements for the above in accordance with Federal Acquisition Regulation (FAR) 19.502-2(b). Please specify one primary and one alternate Point of Contact (POC) within your firm, including telephone numbers and email addresses Only electronic copies of capability statements will be accepted and should be emailed to: Sarah.c.schauf@usda.gov. Please submit all information to sarah.c.schauf@usda.gov�Sept 9, 2020, by 9:00 AMCST. NO TELEPHONE REQUESTS WILL BE ACCEPTED. Place of Contract Performance: AMES IA 50011 United States �
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/03a879b9d03542dc9e650278a0e26db1/view)
- Place of Performance
- Address: Ames, IA 50011, USA
- Zip Code: 50011
- Country: USA
- Zip Code: 50011
- Record
- SN05785220-F 20200904/200902230147 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |