Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF SEPTEMBER 11, 2020 SAM #6861
SOLICITATION NOTICE

Y -- Unit 1 & 2 Generator Stator Rewind

Notice Date
9/9/2020 9:40:34 AM
 
Notice Type
Presolicitation
 
NAICS
237130 — Power and Communication Line and Related Structures Construction
 
Contracting Office
US ARMY ENGINEER DISTRICT TULSA TULSA OK 74137-4290 USA
 
ZIP Code
74137-4290
 
Solicitation Number
W912BV20R0040
 
Response Due
9/9/2020 12:00:00 PM
 
Archive Date
09/24/2020
 
Point of Contact
Shawn Brady, Phone: 9186697670, Julie S. Hill, Phone: 9186697699
 
E-Mail Address
shawn.brady@usace.army.mil, julie.s.hill@usace.army.mil
(shawn.brady@usace.army.mil, julie.s.hill@usace.army.mil)
 
Description
1. Action Code: This is a Pre-Solicitation notice. 2. Date: 25 August 2020 3. Contracting Office Address: ����������� USACE CEST-CT-E ����������� 2488 E. 81st Street ����������� Tulsa, Oklahoma 74137-4290 4. Classification Code: Y � Facilities & Constructions 5. Subject Title: Unit 1 & 2 Generator Stator Rewind 6. Solicitation Number: W912BV20R0040 7. Contact(s) Points: Name�������������� Shawn Brady��������������������������������������������������� Julie S. Hill Phone�������������� 918-669-7670��������������������������������������������������� 918-669-7699 Email�������������� shawn.brady@usace.army.mil�� ����������� ����������� rudolfo.morales@usace.army.mil 8. Important: This notice does not constitute a request for proposal, request for quote, or invitation for bid. The intent of this notice is to provide the pre-solicitation notice required by FAR 5.2- Synopsis of Proposed Contract Actions in preparation for release of the Request for Proposal (RFP) at a later date. 9. Description: The RFP expected to be issued on or about the October. The Proposal due date is planned, on or about,�end of October. The North American Industry Code Standard (NAICS) is 237130 - Power and Communication Line and Related Structures Construction, and the size standard is $39.5M. The planned procurement method is contracting by Lowest Price Technically Acceptable (LPTA).� The resulting contract is planned to be a firm-fixed price (FFP) contract for the work described in the Statement of Work which will be provided with the solicitation.��� The Government is seeking qualified, experienced sources capable of performing all work required to rewind two approximately 50 MVA hydroelectric generating units at Keystone Powerhouse, Sand Springs, OK. The contractor shall furnish all labor, material, and equipment to perform this work in strict accordance with the detailed requirements of the specifications and associated drawings. The work described within these specifications shall include, but not necessarily be limited to, the following: 1. Design, manufacture, and perform Voltage Endurance test on prototype coils (or Roebel bars). 2. Perform Thermal Cycle test on prototype coils (or Roebel bars). 3. Design, manufacture, shop test, prepare and load for shipment, deliver f.o.b. destination, and unload two complete sets of stator coils (or Roebel bars) and specified accessories. 4. Pre-disassembly mechanical and electrical testing, and alignment checks of two hydroelectric generating units. 5. Disassemble two generator units, including the exciter equipment, air housing, and rotor. 6. Remove old stator coils, install and test new stator windings and accessories. 7. Clean, inspect, and test stator iron; perform necessary repairs to stator iron. 8. Furnish and Install new surge rings, circuit rings, main leads, and neutral leads. 9. Refurbish (machine) the collector rings. 10. Clean and inspect rotor, clean and test the rotor field poles winding. 11. Furnish spare parts. 12. Perform generator special field tests. 13. Furnish manufacturer�s representative on-site services to supervise installation of the generator stator coils (or Roebel bars), reassembly, and to perform start-up, commissioning, and testing of two generators. 14. Perform all work required for painting, miscellaneous welding, machinist, electrician, and other skilled craftsman hire. 10. Place of Contract Performance: Keystone Powerhouse, Oklahoma 11. Set Aside Status: This is an unrestricted acquisition. 12. Additional Details: THIS SOLICITATION WILL BE OFFERED IN ELECTRONIC FORMAT ONLY. NO HARD COPIES WILL BE PROVIDED. Offerors can view and/or download the RFP and attachments at https://www.fbo.gov (FBO) when the RFP is posted. Interested parties can register under the Interested Vendors List at FBO. This will be the only method of amendment distribution; therefore, it is the OFFERORS� RESPONSIBILITY TO CHECK THE WEBSITE PERIODICALLY FOR ANY AMENDMENTS TO THE SOLICITATION. Prospective Offerors MUST register themselves on the website. Prospective Offerors must also be registered with the System for Award Management (SAM) at https://www.sam.gov/portal/public/SAM in order to participate in this procurement. 13. Delivery Date:� 18 months after NTP 15. No reimbursement will be made for any costs associated with providing information in response to this synopsis or any follow up information requests.
 
Web Link
SAM.gov Permalink
(https://beta.sam.gov/opp/ceac1f2a8c134277b535cbcf440f21ec/view)
 
Record
SN05791452-F 20200911/200909230144 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.