Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF SEPTEMBER 23, 2020 SAM #6873
SOLICITATION NOTICE

71 -- Force Support Squadron Office Furniture

Notice Date

9/21/2020 5:49:18 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

337211 — Wood Office Furniture Manufacturing
 

Contracting Office

W7NX USPFO ACTIVITY PAANG 171 CORAOPOLIS PA 15108-4805 USA
 

ZIP Code

15108-4805
 

Solicitation Number

W50S9120Q0014
 

Response Due

9/24/2020 12:00:00 PM
 

Archive Date

10/09/2020
 

Point of Contact

Michael W. Boyd, Phone: 4127767660
 

E-Mail Address

michael.boyd.9@us.af.mil
(michael.boyd.9@us.af.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

// Amendment 004: Revised quantities/description slightly.� Extended RFQ deadline to Thursday, 24�September at 3:00PM to allow vendors adequate time to respond to revised quantities below, as well as revised drawings which have been sent out to all interested vendors.� Extended Q&A deadlines as well.��All other terms and conditions remain unchanged.�� // Amendment 003: Extended RFQ deadline to Monday, 21 September at 3:00PM to allow vendors adequate time to respond to revised quantities below, as well as revised drawings which have been sent out to all interested vendors.� Extended Q&A deadlines as well.��All other terms and conditions remain unchanged.�� // Amendment 002: Extended�RFQ deadline to Friday, 18 September at 3:00PM to allow vendors adequate time to respond to pending clarificiations / revisions to floor plans and furniture quantities.� Clarifications / Revisions will be posted NLT than 3:00PM EST on Tuesday, 15 September.� All other terms and conditions remain unchanged.�� // Amendment 001: Added Master Q&A List Attachment.� Emailed drawings to interested vendors.� Moved due date from September 15�to September 16.� All other terms and conditions remain unchanged.� � This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation W50S9120Q0014 is issued as a request for quotation (RFQ). This solicitation document incorporates provisions and clauses of those in effect through Federal Acquisition Circular 2020-07 and Defense Circular Number 20200605. This procurement is being issued as a 100% Small Business Set-Aside. The North American Industry Classification System Code is 337211 with a size standard of 1,000 employees. This acquisition is 100% set aside for small business concerns. The right to make multiple or no award is reserved in the event it is advantageous to the Government to do so. Location of performance will be at the 171st ARW of the PA Air National Guard, Coraopolis (Pittsburgh) PA. CLIN 001 � Force Support Squadron Furniture: // Main Personnel Work Area & Offices (see drawing �262A � layout� for dimensions and layout in order to determine best size) a) 15 EA � Executive Task Chair Mesh Back � Black b) 25 EA � Nest Style Chairs � Black c) 2 EA � Workstations, Approx. Size 8'-0"" x 8'-0"", to include: Various Height Panels, 38,54, & 70""h with (1) Height adjustable desk, (1) credenza worksurface w/ 2Drawer Lateral File, (1) Combination wardrobe cabinet, Side Open Shelf and BBF Pedestal (P1 & P2) d) 8 EA � Workstations, Approx. Size 7'-0"" x 7'-0"", to include: Various Height Panels, 38,54, & 70""h with (1) Height adjustable desk, (1) credenza worksurface w/ 2Drawer Lateral File, (1) Combination wardrobe cabinet, Side Open Shelf and BBF Pedestal (P3-P10) e) 14 EA - Approx. Seat Height Work Table 24""D x 36""W with overhead hutch (DSG Desks) f) 1�EA � Workstation, Approx. 10�-0� x 8�-0�, to include 70� Height Panels, with U-Shaped desk with hutch on wall-facing side and lower drawers.� Workspace desk in middle.� (ID Room) // IPR Section (see drawing ""IPR"" for dimensions and layout in order to determine best size) g) 1 EA � Approx. 6� H x 3� W Filing Cabinet (see drawing ""IPR""�for dimensions and layout in order to determine best size) h) 1 EA � Approx. 3� H x 6� W Filing Cabinet (see drawing ""IPR""�for dimensions and layout in order to determine best size) i) 1�EA � Height Adjustable L-Shaped Desk with hutch and lower drawers on wall-facing side and transaction counter on non-wall facing side (see drawing ""IPR""�for dimensions and layout in order to determine best size) j) 5 EA � Executive Task Chair Mesh Back � Black ) 2 EA � Nest Style Chairs � Black k) 2 EA � Height Adjustable Work Table 24""D x 48""W w/ 2 drawer file cabinet and hutch l) 2 EA - Approx. Seat Height Work Table 24""D x 36""W w/hutch and 1 drawer file cabinet // Testing Section (see drawing ""Testing � Room 256"" for dimensions and layout in order to determine best size) m) 12 EA - Executive Task Chair Mesh Back � Black n) 10 EA - Approx. Seat Height Work Table 24""D x 36""W o) 2 EA � Height Adjustable Work Table 24""D x 48""W ALL DESKS MUST HAVE AT LEAST 48� BARRIERS AROUND NON-SEAT SIDES SO AS TO FACILITATE ADEQUATE PRIVACY FOR TEST TASKING PURPOSES. // Command Section (see drawing ""Command Section 249_251""�for dimensions and layout in order to determine best size) p) 2 EA � U-Shaped desk with hutch on wall-facing side and lower drawers.� Workspace desk in middle.� 48� Height partition on customer-facing side.� q) 1 EA � U-Shaped desk with hutch on wall-facing side and lower drawers.� Height Adjustable Work Table 24""D x 48""W in middle.� r) 1 EA � U-Shaped desk, separated with hutch on wall-facing side and lower drawers.� Height Adjustable Work Table 24""D x 48""W on side opposite hutch.� s) 4 EA � Executive Task Chair Mesh Back � Black t) 10 EA � Nest Style Chairs � Black u) 2 EA � Approx. 6� H x 3� W Filing Cabinet v) 1 EA � Approx. 4� Diameter Seat Height Conference Table // Rooms 185 & 186 w) 10 EA -�Executive Task Chair Mesh Back � Black x) 2 EA � Nest Style Chairs � Black y) 2�EA � Height Adjustable L-Shaped Desk with hutch on wall-facing side and lower drawers (see drawing ""Rooms 185_186""�for dimensions and layout in order to determine best size) z) 5�EA - Workspace desk with hutch and lower drawers� (see drawing ""Rooms 185_186""�for dimensions and layout in order to determine best size) aa) 1 EA � Height Adjustable U-Shaped desk with hutch on wall-facing side and lower drawers (see drawing ""Rooms 185_186""�for dimensions and layout in order to determine best size) ab) 1�EA - Filing Cabinet/Closet�combination; two outward-opening doors on top, two drawers on bottom� (see drawing ""Rooms 185_186""�for dimensions and layout in order to determine best size) ac) 1 EA - Filing Cabinet with four (4) drawers� (see drawing ""Rooms 185_186""�for dimensions and layout in order to determine best size) ad) 1 EA - Short bookcase� (see drawing ""Rooms 185_186""�for dimensions and layout in order to determine best size) // Training/Classroom ae) 6 EA �Work Table 24""D x 48""W (see drawing ""Room 176 � Training Classroom""�for dimensions and layout in order to determine best size) af) 2 EA � Work Table 24""D x 60""W (see drawing ""Room 176 � Training Classroom""�for dimensions and layout in order to determine best size) ag) 14 EA � Executive Task Chair Mesh Back � Black ah) Shipping, Labor, and any other Miscellaneous Costs to Deliver and Install all of the above NOTE: All Furniture MUST MATCH unless otherwise approved by Requesting Activity Quotes will be evaluated on technical acceptability and lowest price. It is the responsibility of the offeror to view the website for any changes or amendments to this RFQ. To receive an award of contract the offeror must be registered in System for Award Management (SAM) database which can be accessed at the website https://sam.gov/portal/SAM Quotes for New and Factory-Refurbished Items are Acceptable.� Quotes including items which are used and non-refurbished, and/or have excessive amounts of wear and tear, and/or have any physical damage, will not be accepted.� For OPSEC reasons, drawings have not been posted however are available by request to interested offerors.� Please email michael.boyd.9@us.af.mil for drawings.� QUOTES WILL BE EVALUATED ON TECHNICAL ACCEPTABILITY AND LOWEST PRICE. Questions from Offerors to Contracting Office due: 21�September, 2020 at 3:00PM EST. Questions will be addressed no later than: 22�September, 2020 at 3:00PM EST. Quotations due no later than Monday 24�September, 2020 at 3:00PM EST. It is the responsibility of the vendor to ensure the quote and questions was received by 171st Contracting Office on time. The selected Offeror must comply with the following Provisions and Clauses, which are incorporated herein by reference: Provisions: FAR 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.; FAR 52.222-22, Previous Contracts and Compliance Reports (Feb 1999); 52.212-3 Offeror Representations and Certifications�Commercial Items (Oct 2018). 52.222-25 Affirmative Action Compliance (Apr 1984); FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran�Representation and Certifications (Aug 2018); FAR 52.233-2, Service of Protest (Sep 2006); FAR 52.252-1, Solicitation Provisions Incorporated by Reference (Feb 1998); 252.204-7007 Alternate A, Annual Representations and Certifications (Apr 2019); DFARS 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls (Oct 2016); DFARS 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law (Jan 2012); DFARS 252.225-7031, Secondary Arab Boycott of Israel (Jun 2005) Clauses: FAR 52.202-1, Definitions (Nov 2013); FAR 52.203-5, Covenant Against Contingent Fees (May 2014); FAR 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006); FAR 52.203-7, Anti-Kickback Procedures (May 2014); FAR 52.204-7, System for Award Management (Oct 2018); FAR 52.204-13, System for Award Management Maintenance (Oct 2018); 52.204-18, Commercial and Government Entity Code Maintenance (Jul 2016); FAR 52.204-19, Incorporation by Reference of Representations and Certifications (Dec 2014); FAR 52.209-10, Prohibition on Contracting With Inverted Domestic Corporations (Nov 2015); FAR 52.211-6, Brand Name or Equal (Aug 1999); FAR 52.212?1, Instructions to Offerors�Commercial Items (Oct 2018); FAR 52.212?2, Evaluation�Commercial Items (Oct 2014); FAR 52.212?3 Alternate I, Offeror Representations and Certifications�Commercial Items (Oct 2018); FAR 52.212?4, Contract Terms and Conditions�Commercial Items (Oct 2018); FAR 52.212-5 DEV, Contract Terms and Conditions Required to Implement Statutes or Executive Orders�Commercial Items (Sep 2018); FAR 52.219?6, Notice of Total Small Business Set-Aside (Nov 2011); FAR 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013); FAR 52.222-3, Convict Labor (Jun 2003); FAR 52.222-19, Child Labor�Cooperation with Authorities and Remedies (Jan 2018); FAR 52.222?21, Prohibition of Segregated Facilities (Apr 2015); FAR 52.222-26, Equal Opportunity (Sep 2016); FAR 52.222?50, Combating Trafficking in Persons (Jan 2019); FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011); FAR 52.225?13, Restrictions on Certain Foreign Purchases (Jun 2008); FAR 52.225-18, Place of Manufacture (Aug 2018); FAR 52.232-1, Payments (Apr 1984); FAR 52.232-33, Payment by Electronic Funds Transfer�System for Award Management (Oct 2018); FAR 52.232-39, Unenforceability of Unauthorized Obligations (Jun 2013); FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Dec 2013); FAR 52.233?3, Protest After Award (Aug 1996); FAR 52.233?4, Applicable Law for Breach of Contract Claim (Oct 2004); FAR 52.243-1, Changes � Fixed Price (Aug 1987); FAR 52.244-6, Subcontracts for Commercial Items (Jan 2019); FAR 52.252?2, Clauses Incorporated by Reference (Feb 1988); DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (Sep 2011); DFARS 252.203?7002, Requirement to Inform Employees of Whistleblower Rights (Sep 2013); DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (Oct 2016); DFARS 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support (May 2016); DFARS 252.211-7003, Item Unique Identification and Valuation (Mar 2016); DFARS 252.211-7008, Use of Government-Assigned Serial Numbers (Sep 2010); DFARS 252.225-7001, Buy American and Balance of Payments Program (Dec 2017); DFARS 252.225-7048, Export-Controlled Items (Jun 2013); DFARS 252.232?7003, Electronic Submission of Payment Requests and Receiving Reports (Dec 2018); DFARS 252.232-7006, Wide Area WorkFlow Payment Instructions (Dec 2018); DFARS 252.232?7010, Levies on Contract Payments (Dec 2006); DFARS 252.247?7023, Transportation of Supplies by Sea (Feb 2019).� Provisions and Clauses for this synopsis/solicitation can be found in full text at https://www.acquisition.gov/browse/index/far.
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/652e62ea5e4444bcaa6b08140d936965/view)
 

Place of Performance

Address: Coraopolis, PA 15108, USA

Zip Code: 15108

Country: USA
 

Record

SN05805930-F 20200923/200921230215 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |