SOURCES SOUGHT
99 -- Center Hill Tainter Gates
- Notice Date
- 1/4/2021 12:56:06 PM
- Notice Type
- Sources Sought
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- US ARMY ENGINEER DISTRICT NASHVILLE NASHVILLE TN 37203-1070 USA
- ZIP Code
- 37203-1070
- Solicitation Number
- W912P521RCENT
- Response Due
- 1/15/2021 12:00:00 PM
- Archive Date
- 01/30/2021
- Point of Contact
- Samantha (Dani) Harrison, Phone: 6157367755
- E-Mail Address
-
samantha.d.harrison@usace.army.mil
(samantha.d.harrison@usace.army.mil)
- Description
- REQUEST FOR INFORMATION The Government is issuing this Request for Information to determine a competitive basis for the procurement described. This is not a solicitation. No reimbursement will be made for any costs associated with providing information in response to this survey.� This survey is for market research purposes only. �Only contractors capable of performing this type of work should respond to this Request for Information.� Requirement The US Army Corps of Engineers, (USACE), Nashville District, anticipates a requirement for a firm fixed-price construction contract to replace eight (8) existing tainter spillway gates at Center Hill Dam. The estimated magnitude of this project is more than $10,000,000.00. The Contractor will be responsible for the following activities/items under the proposed contract:� 1) �Fabricate tainter spillway gates with a skin plate of approximately 50� long and 37� tall, and vertically supported by WT stringers. The vertical stringers are supported by 70� deep horizontal girders which carry the hydrostatic load to three trunnion arms on each side of the beams.� 2) �The three trunnion arms come together and connect to a trunnion connection hub, where the gates are ultimately supported by a solid 14� diameter pin. �The gate weighs approximately 150,000 pounds.� 3) �This work will be accomplished via construction contract with a target award dates of on/about September 30, 2021.� 4) �Once A gate is decommissioned, the replacement gate must be in place and able to hold back full lake levels by December 1st.� *Please note that this description is subject to change.� The anticipated NAICS code is 237990, Other Heavy and Civil Engineering Construction, with a small business size standard of $39.5 million.� Survey The Government is issuing this notice to determine a competitive basis as this contract will be solicited as an Invitation for Bids (IFB) with Definitive Responsibility Criteria (DRC). This is not a solicitation, and the items listed herein are subject to change or be eliminated from the requirement. This survey is for market research purposes only. Only Contractors capable of performing this type of work should respond to this Request for Information.� Your response to this survey is requested by 2:00 PM Central Time, January 15, 2021. Please send by email to Samantha (Dani) Harrison at Samantha.D.Harrison@usace.army.mil� �� �1) Name of your firm:� �� �2) CAGE Code: �� � �� �3) Point of Contact (Phone number and Email Address): �� �4) Please provide responses to the following: a. �At least one (1) project completed within the past six (6) years demonstrating experiences as a prime contractor or subcontractor, erecting and maintaining a temporary facility with a footprint of at least 500 square feet, used for the purpose of particulate containment and controlling environmental conditions (e.g. ambient temperatures and humidity) during media blasting and painting operations of a steel structure.� Project Name:� Contract Number (If applicable):� Year Completed:� Prime or Sub-Contractor:� Type and percentage of work self-performed (based on contract value): Dollar Amount:� General Description of the project:� b. �At least one (1) project completed within the last six (6) years demonstrating experience as a prime contractor or subcontractor, performing containment and lead abatement during media blasting operations or managing a subcontractor who performed containment and lead abatement during media blasting operations. Project Name:� Contract Number (If applicable):� Year Completed:� Prime or Sub-Contractor:� Type and percentage of work self-performed (based on contract value): Dollar Amount:� General Description of the project:� c. �At least one (1) project completed within the last six (6) years demonstrating experience as a prime contractor or subcontractor applying the specific vinyl coating system (5-E-Z) to a steel structure of at least 1,000 square feet in surface area.� Project Name:� Contract Number (If applicable):� Year Completed:� Prime or Sub-Contractor:� Type and percentage of work self-performed (based on contract value): Dollar Amount:� General Description of the project:� d. �At least one (1) project completed within the last six (6) years demonstrating experience as a prime contractor or subcontractor, performing structural welding in accordance with AWS D1.5 (or managing a subcontractor who performed structural welding in accordance with AWS D1.5) for repairs, retrofits, new fabrication, or additions to steel structures. � Project Name:� Contract Number (If applicable):� Year Completed:� Prime or Sub-Contractor:� Type and percentage of work self-performed (based on contract value): Dollar Amount:� General Description of the project:� e. �Bidder shall have a TIR </= 3.0 or an EMR </= 1.0 for calendar year 2020. �If submitting a TIR, the Bidder shall submit a completed OSHA Form 300A, Summary of Work-Related Injuries and Illnesses, and the TIR calculations. For both EMR and TIR, the Bidder shall include a signed endorsement letter from their Insurer verifying the providing rating is current and accurate for calendar year 2020.� Project Name:� Contract Number (If applicable):� Year Completed:� Prime or Sub-Contractor:� Type and percentage of work self-performed (based on contract value): Dollar Amount:� General Description of the project:� 5) �Are you a Small Business classified under NAICS Code 237990? If so, do you fall into a sub-category (e.g. HubZone, 8(a), SDVOSB, WOSB, etc.)?� 6) �For this requirement, what percentage of this work would you subcontract (reference FAR 52.219-14, Limitations on Subcontracting, Class Deviation 2019-O0003)?� 7) �What work would you subcontract?� 8) �Do you plan to subcontract to only small businesses?� 9) �What are the prospective subcontractor names?� 10) �If the answer to question 8 is �yes�, are those small businesses with a sub-category (e.g. HubZone, 8(a), SDVOSB, WOSB, etc.)? 11) �What is your bonding capacity per contract?� 12) �What is your aggregate bonding capacity per contract?� 13) �If this requirement is advertised, do you anticipate submitting a bid?� 14) �Please provide any additional information you feel is necessary.�
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/2258db21270c476a8bd87f8b68690735/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN05884492-F 20210106/210104230103 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |