SOLICITATION NOTICE
26 -- NSN 2610-01-530-9350
- Notice Date
- 1/5/2021 10:34:43 AM
- Notice Type
- Presolicitation
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7LX-21-R-X009
- Response Due
- 1/15/2021 8:59:00 PM
- Archive Date
- 01/30/2021
- Point of Contact
- Xiomara Seda-Vargas
- E-Mail Address
-
xiomara.sedavargas@dla.mil
(xiomara.sedavargas@dla.mil)
- Description
- Item Name: Tire, Pneumatic, Vehicular NSN:� 2610-01-530-9350 Unit of Issue: EA Destination Information: FOB Destination Government Requested Delivery Days: 30 days NAICS Code: 326211; small business size standard is 1,500 employees This solicitation contains an item that is available from only one or a limited number of responsible sources in accordance with 10 U.S.C. 2304(c) (1) and FAR 6.302-1. Pursuant to FAR 19.502-2(b) this requirement will be solicited as Unrestricted.� This is a FAR Subpart 13.5 Indefinite Delivery Contract (IDC) with a three (3) year base period and no options.� Simplified Procedures for Certain Commercial Items are applicable.� FOB and Inspection/Acceptance (I/A) will be at Destination. The Long Term Contract (LTC) resulting from this solicitation will provide supply support to the GTP (Global Tires Program) Integrator.� This solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/ on or around 1/15/2021. Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS.� RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 8 (Offer Due Date/Local Time) on Page 1 of Standard Form 1449 (Solicitation for Commercial Items). The Government will be conducting a Lowest Priced Technically Acceptable (LPTA) source selection, I/A/W FAR 15.101-2. The Contracting Officer will open and evaluate all offers to determine technical acceptability. The award decision will be made on the basis of the lowest evaluated price of proposals meeting the acceptability standards for non-cost factors, as outlined below: A technically acceptable proposal will be determined through an evaluation of each offeror's proposal by the Government. The evaluation factors for determining acceptability of offers are: ���������� Materiel Requirement ���������� Delivery Requirement ���������� Experience Work Experience Sub-Factor Schedule Experience Sub-Factor ���������� Compliance Requirement Technical / Quality Control Plan Sub-Factor Information Technology Sub-Factor All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. *** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:015309350 ���� TIRE,PNEUMATIC,VEHICLE ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:ZL001 ���� REFERENCE NUMBER:CS187 ���� TIRE CHARACTERISTICS ���� MANUFACTURER'S CAGE CODE & PART NUMBER ���� TIRE SIZE DESIGNATION: 22X8X10 ���� TIRE STRENGTH: LOAD RANGE E ���� TIRE LOAD MAX. CAPACITY: 3360 LBS ���� MAX. INFLATION PRESSURE: 85 PSI ���� MATERIAL: RUBBER, NATURAL ���� TIRE CONSTRUCTION: BIAS ���� TIRE AIR RETENTION METHOD: TUBELESS TYPE ���� FLAP: NO ���� SERVICE TYPE: INDUSTRIAL IMPLEMENT ���� TREAD DESIGN: RIBBED MULTIPLE ���� VEHICLE APPLICATION: AIR FORCE MHU-226 MUNITION TRAILER ���� FAST GLOBAL SOLUTIONS, INC. DBA 5T389 P/N 20038115 ���� IAW REFERENCE DRAWING NR 5T389 20038115 ���� REVISION NR���� DTD 09/20/2006 ���� PART PIECE NUMBER: ���� IAW REFERENCE STD NR MIL-STD-129R(2) ���� REVISION NR R�� DTD 09/27/2019 ���� PART PIECE NUMBER: ���� PREP FOR DELIVERY ���� LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:ZZ� CLNG/DRY:Z� PRESV MAT:ZZ ���� WRAP MAT:ZZ� CUSH/DUNN MAT:ZZ� CUSH/DUNN THKNESS:Z ���� UNIT CONT:ZZ� OPI:M ���� INTRMDTE CONT:ZZ� INTRMDTE CONT QTY:ZZZ ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:32 -32 Type I, shelf life ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING ����� REQUIREMENTS FOR PROCUREMENT ���� MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4 ���� REFERENCE NUMBER:ZDL58 ************************************************************************************************************ ��������������������������������������������������� GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT ���� REFERENCE NUMBER RP001 ���� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER RA001 ���� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� REFERENCE NUMBER RQ011 ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� REFERENCE NUMBER ZL001 ���� ** EXCEPTION:� This shelf life item is ���� Non-Extendable, Code S, with a total shelf ���� life of sixty months. Material furnished ���� under this contract/order shall have at least ���� 42 months of shelf life remaining at time of ���� delivery.� ** ���� REFERENCE NUMBER CS187 ���� CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE ���� USED NOR INCORPORATED IN ANY ITEMS TO BE ���� DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION ���� SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT ���� DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. ���� SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR ���� APPROVAL UNLESS THEY ARE AUTHORIZED BY THE ���� SPECIFICATION REQUIREMENTS. ���� REFERENCE NUMBER ZDL58 ���� PRESERVATION & PACKAGING SHALL BE IAW THE LATEST ���� REVISION OF MIL-DTL-4 PACKAGING OF NON-AIRCRAFT ���� TIRES AND INNER-TUBES. ���� SPECIAL MARKING REQUIREMENT: ���� APPLY SHELF LIFE MARKINGS IAW MIL-STD-129. Item Name: Tire, Pneumatic, Vehicular NSN:� 2610-01-530-9350 Unit of Issue: EA Destination Information: FOB Destination Government Requested Delivery Days: 30 days NAICS Code: 326211; small business size standard is 1,500 employees This solicitation contains an item that is available from only one or a limited number of responsible sources in accordance with 10 U.S.C. 2304(c) (1) and FAR 6.302-1. Pursuant to FAR 19.502-2(b) this requirement will be solicited as Unrestricted.� This is a FAR Subpart 13.5 Indefinite Delivery Contract (IDC) with a three (3) year base period and no options.� Simplified Procedures for Certain Commercial Items are applicable.� FOB and Inspection/Acceptance (I/A) will be at Destination. The Long Term Contract (LTC) resulting from this solicitation will provide supply support to the GTP (Global Tires Program) Integrator.� This solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/ on or around 1/15/2021. Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS.� RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 8 (Offer Due Date/Local Time) on Page 1 of Standard Form 1449 (Solicitation for Commercial Items). The Government will be conducting a Lowest Priced Technically Acceptable (LPTA) source selection, I/A/W FAR 15.101-2. The Contracting Officer will open and evaluate all offers to determine technical acceptability. The award decision will be made on the basis of the lowest evaluated price of proposals meeting the acceptability standards for non-cost factors, as outlined below: A technically acceptable proposal will be determined through an evaluation of each offeror's proposal by the Government. The evaluation factors for determining acceptability of offers are: ���������� Materiel Requirement ���������� Delivery Requirement ���������� Experience Work Experience Sub-Factor Schedule Experience Sub-Factor ���������� Compliance Requirement Technical / Quality Control Plan Sub-Factor Information Technology Sub-Factor All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. *** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:015309350 ���� TIRE,PNEUMATIC,VEHICLE ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:ZL001 ���� REFERENCE NUMBER:CS187 ���� TIRE CHARACTERISTICS ���� MANUFACTURER'S CAGE CODE & PART NUMBER ���� TIRE SIZE DESIGNATION: 22X8X10 ���� TIRE STRENGTH: LOAD RANGE E ���� TIRE LOAD MAX. CAPACITY: 3360 LBS ���� MAX. INFLATION PRESSURE: 85 PSI ���� MATERIAL: RUBBER, NATURAL ���� TIRE CONSTRUCTION: BIAS ���� TIRE AIR RETENTION METHOD: TUBELESS TYPE ���� FLAP: NO ���� SERVICE TYPE: INDUSTRIAL IMPLEMENT ���� TREAD DESIGN: RIBBED MULTIPLE ���� VEHICLE APPLICATION: AIR FORCE MHU-226 MUNITION TRAILER ���� FAST GLOBAL SOLUTIONS, INC. DBA 5T389 P/N 20038115 ���� IAW REFERENCE DRAWING NR 5T389 20038115 ���� REVISION NR���� DTD 09/20/2006 ���� PART PIECE NUMBER: ���� IAW REFERENCE STD NR MIL-STD-129R(2) ���� REVISION NR R�� DTD 09/27/2019 ���� PART PIECE NUMBER: ���� PREP FOR DELIVERY ���� LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:ZZ� CLNG/DRY:Z� PRESV MAT:ZZ ���� WRAP MAT:ZZ� CUSH/DUNN MAT:ZZ� CUSH/DUNN THKNESS:Z ���� UNIT CONT:ZZ� OPI:M ���� INTRMDTE CONT:ZZ� INTRMDTE CONT QTY:ZZZ ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:32 -32 Type I, shelf life ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING ����� REQUIREMENTS FOR PROCUREMENT ���� MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4 ���� REFERENCE NUMBER:ZDL58 ************************************************************************************************************ ��������������������������������������������������� GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT ���� REFERENCE NUMBER RP001 ���� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER RA001 ���� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� REFERENCE NUMBER RQ011 ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� REFERENCE NUMBER ZL001 ���� ** EXCEPTION:� This shelf life item is ���� Non-Extendable, Code S, with a total shelf ���� life of sixty months. Material furnished ���� under this contract/order shall have at least ���� 42 months of shelf life remaining at time of ���� delivery.� ** ���� REFERENCE NUMBER CS187 ���� CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE ���� USED NOR INCORPORATED IN ANY ITEMS TO BE ���� DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION ���� SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT ���� DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. ���� SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR ���� APPROVAL UNLESS THEY ARE AUTHORIZED BY THE ���� SPECIFICATION REQUIREMENTS. ���� REFERENCE NUMBER ZDL58 ���� PRESERVATION & PACKAGING SHALL BE IAW THE LATEST ���� REVISION OF MIL-DTL-4 PACKAGING OF NON-AIRCRAFT ���� TIRES AND INNER-TUBES. ���� SPECIAL MARKING REQUIREMENT: ���� APPLY SHELF LIFE MARKINGS IAW MIL-STD-129.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/7bc4e9e7ad9a42c1942ade3637246091/view)
- Record
- SN05885138-F 20210107/210105230111 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |