SOLICITATION NOTICE
53 -- SPE7MX21R0023, CM20148002, 5330-Special Seal
- Notice Date
- 1/7/2021 8:39:05 AM
- Notice Type
- Presolicitation
- NAICS
- 339991
— Gasket, Packing, and Sealing Device Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX-21-R-0023
- Response Due
- 2/21/2021 8:59:00 PM
- Archive Date
- 03/08/2021
- Point of Contact
- Eukia Bryant, Phone: 6146928997
- E-Mail Address
-
eukia.bryant@dla.mil
(eukia.bryant@dla.mil)
- Description
- This requirement is for�NSN 5330-00-606-8780.� This�NSN has an estimated annual demand of 248 each. This acquisition is for a Fixed Price, Indefinite Quantity Contract (IQC).� FAR Part 15 � Contracting by Negotiations.�The proposed procurement contains a 1-year base period plus two option years.��The total contract period shall not exceed 3�years. Award will be made on an ALL�OR NONE BASIS per NSN for items supplied covered under this contract. Copies of the solicitation is available at the https://www.dibbs.bsm.dla.mil/RFP/�and available approximately 15 days�after this notice is published in beta.SAM.gov. NSN� � � � � � � � � � � � � � � �CAGE� � � � � � � � � � � � �COMPANY NAME� � � �� � � � � �PART NUM 5330-00-606-8780� � � � �62983� � � � � � � � � � � � � Eaton Aerospace� � � � � � � � � � � 138488 This solicitation is UNRESTRICTED.��All offers shall be in the English language and�in US dollars. The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price�discussions under this solicitation. The solicitation shall be available in DIBBS on or about November 16, 2020. All responsible sources may submit an offer/quote which shall be considered. (X) PART NUMBER: Specifications, plans, or drawings related to the procurement described are not available and cannot be furnished by the Government. (X) Trade Agreements Acts (X) Sole Source (FAR 6.302) (X) Commercial Notice (when the Government does not intend to use Part 12, Commercial Acquisition Procedures)(FAR 5.206(e)(4)) (X) The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation. Type of Set-Aside: None PID DATA: SEAL, SPECIAL RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. �THE CONTRACTUAL END �ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, �STYLE 1. THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS. NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. CRITICAL APPLICATION ITEM EATON AEROSPACE LLC 62983 P/N 138488 PACKAGING DATA: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 �PRES MTHD:33 �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:00 �CUSH/DUNN MAT:00 �CUSH/DUNN THKNESS:0 UNIT CONT:BV �OPI:M INTRMDTE CONT:D3 �INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING �REQUIREMENTS FOR PROCUREMENT IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS �
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/207e9c364eff4dfdbb7bbfb6d578edbf/view)
- Place of Performance
- Address: Columbus, OH 43213, USA
- Zip Code: 43213
- Country: USA
- Zip Code: 43213
- Record
- SN05887389-F 20210109/210107230122 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |