SOURCES SOUGHT
13 -- Sources Sought - 10 Gauge and 12 Gauge Shotgun Shell Production
- Notice Date
- 1/11/2021 1:31:21 PM
- Notice Type
- Sources Sought
- NAICS
- 332
—
- Contracting Office
- W4MM USA JOINT MUNITIONS CMD ROCK ISLAND IL 61299-5000 USA
- ZIP Code
- 61299-5000
- Solicitation Number
- W52P1J-22-S-SHOT
- Response Due
- 2/5/2021 12:00:00 AM
- Archive Date
- 02/20/2021
- Point of Contact
- Alex R, Sheppard, Phone: 3097825477, Mark D. Stevens, Phone: 3097822082
- E-Mail Address
-
alex.r.sheppard.civ@mail.mil, mark.d.stevens.civ@mail.mil
(alex.r.sheppard.civ@mail.mil, mark.d.stevens.civ@mail.mil)
- Description
- Description: The Project Manager for Maneuver Ammunition Systems (PM-MAS), Picatinny Arsenal, NJ and the Army Contracting Command -Rock Island, IL are currently seeking sources for the manufacture and delivery of Cartridge (Ctg) 12 Gauge �#00 Buckshot (A011), Ctg 12 Gauge #9 Shot (A017), Ctg 10 Gauge Blank (A010), and Ctg 12 Gauge 7 � Shot (A014). Department of Defense Identification Code (DODIC) A011 is a 12 Ga. 2 3/4� round with nine .330 inch diameter 00 Buckshot pellets.� It is packed 5 cartridges in a cardboard carton, 32 cartons packed in an M2A2 ammunition box.� Two ammunition boxes are then packed into a wire bound wooden crate.� This ammunition is used for training and combat.� � DODIC A017 is a 12 Ga. 2 3/4� round with 1 1/8 ounces of #9 shot (approximately 575 pellets .080� in diameter). It is packed 25 cartridges in a cardboard carton, 20 cartons in a fiberboard box.� This ammunition is used for training and target competition.�� DODIC A010 is a 10 Ga. 2 7/8� round with a blank charge. It is packed 5 cartridges in a cardboard carton, cartons packed into a fiberboard box.� This ammunition is used in training in a simulator.� Please note that the drawing for DODIC A010 is currently marked obsolete. Prior to the potential release of a future request for proposal, the Government will be removing the obsolete marking from the drawing.�� DODIC A014 is a 12 Ga. 2 3/4"" round with 1 1/8 ounces of #7 1/2 Shot that is approximately 0.095"" diameter and weighs about 1.25 grains each. It can be fired out of the M26, M1014, Mossberg Model 500/590, and Remington 870/MCS shotguns. It is packed 48 cartridges in a cardboard box.� This ammunition is used for training and marksmanship.�� Specifications:� A011, A017, A010, and A014 cartridges shall be manufactured in accordance with the specified performance specifications noted above. To obtain the Technical Data Packages (TDPs) for this Sources Sought, Offerors must request explicit access through the ""Attachments/Links"" tab in this announcement. Request access to the document titled ""TDP Request W52P1J-22-S-SHOT"". When prompted for ""Reason for Request"", Offerors shall enter the following: ""I am requesting access to the .zip file for the TDPs under Sources Sought W52P1J-22-S-SHOT. My CAGE Code is XXXXX"". Successful completion of this will prompt a Government point of contact to send the TDP to the requesting data custodian via the DoD SAFE website. Offerors must have an approved DD Form 2345, Military Critical Technical Data Agreement, on file with the Joint Certification Program (JCP) in order to be granted access to the TDP. Restricted technical data will not be available to an Offeror who has not been certified. NOTE: The TDP requestor must be the data custodian in the JCP database or the TDP request will be denied. To verify who your data custodian is, please log into https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/www.dlis.dla.mil/jcp/ and use the CAGE Code search function. Planned Acquisition:� A five (5) year Indefinite Delivery Indefinite Quantity (IDIQ) contract (FY22-FY27) is contemplated for this acquisition with total quantities up to approximately 14M each of one or more of the described DODICs over the life of the contract.� The Government anticipates making one award. The planned approach is Full and Open Competition.� ��� Submission Information:� All responsible, interested sources should submit their capabilities/qualification data. The respondent's capabilities information must demonstrate the ability to produce approximately 2.8M rounds annually of these cartridges.� �Submittal of information is requested via electronic mail only, no later than 30 days from the date of this notice. �All responses should be submitted to Alex Sheppard at ACC-RI, e-mail address alex.r.sheppard.civ@mail.mil .All information is to be submitted at no cost or obligation to the Government, as this notice is submitted for planning purposes only.� Please include company name, address, telephone number, email address, technical point of contact, �and company size (please specify as either a Large Business Foreign-Owned Business, Small Business, Small Disadvantaged Business, 8(a) concern, Woman-Owned Small Business, Historically Underutilized Business Zone concern, Veteran-Owned Small Business, or Service-Disabled Small Business).� Brochures/literature may be attached to the e-mail submission. This is a Market Survey Notice only and it is not a pre-solicitation notice. If a formal solicitation is generated at a later date, a solicitation notice will be published.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/9941b51840d84c699db41a00f21dd5c2/view)
- Record
- SN05889519-F 20210113/210111230107 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |