SOLICITATION NOTICE
72 -- Food Service Area Flooring Renovation Materials
- Notice Date
- 1/12/2021 9:06:29 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 325510
— Paint and Coating Manufacturing
- Contracting Office
- FPC DULUTH DULUTH MN 55814 USA
- ZIP Code
- 55814
- Solicitation Number
- 4D2K_01
- Response Due
- 1/22/2021 12:00:00 AM
- Archive Date
- 07/21/2021
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Awardee
- null
- Description
- Bids are being solicited under solicitation number 4D2K_01. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as a Request for Quote (RFQ), unless otherwise indicated herein. If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.UnisonMarketplace.com and reference Buy No. 1053815. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the Unison Marketplace Fee, for contract-specific items. If Unison receives notice that, due to inclusion of the Unison Marketplace Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the Unison Marketplace Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-01-22 13:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be 4464 Ralston Dr, MN 55811 The FPC DULUTH requires the following items, Brand Name or Equal, to the following: LI 001: Epoxy Mortar Grout Coat Coverage per gallon: 267 sq. ft. @ 6 mils Per coat or 100-133 sq. ft per gallon for one Coat application @ 12-16 mils 1 year shelf life Gloss Finish 1.5 gal kits, 20, EA; LI 002: Heavy Duty Epoxy Repair For heavy traffic, forklift traffic and steel Wheel equipment area 2 year shelf life Compressive strength: 11, 150 psi @ ASTN D695 Flexural strength: 15,150 psi @ ASTM D790 Tensile strength: 6,800 psi @ ASTM D638 Heat deflection: 70.5 degrees C 2 ASTM D648 5 gal kits, 198, EA; LI 003: 100% Solids Epoxy Primer Coverage: 300 sq. ft. per gallon $ 4-5 mils 1 year shelf life Pot life 20-30 min 1.5 gal or 5 gal kits, 14, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FPC DULUTH intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. FPC DULUTH is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Sellers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Sellers that require special considerations or assistance may contact the Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Sellers require additional clarification, contact Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. See below and attached for details. FPC Duluth is seeking a GSA, small-business source that can provide all of the requested items. This is strictly a supply requirement, no installation needed. Our evaluation factors are best value to the Government, lowest price, technical acceptance, and past performance. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable). Award Criteria-An award will be made to a responsive offeror (who submits all required submissions on time), whose past performance does not pose a risk to the Government, and whose offer is the Lowest Price Technically Acceptable (LPTA). An offer is technically acceptable if its technical capabilities conform to the Government's Statement of Work or listed specs whichever is applicable to the buy. Supplemental Bid Information In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. For Exact Match Only Commodity Buys- NO SUBSTITUTIONS, EXACT MATCH ONLY. The vendor may not substitute any item/service listed on this order without prior written approval from the DHS/CBP Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this RFQ. Items/services that do not conform to descriptions and part numbers found in this RFQ will be rejected at the time of delivery causing a return at the vendor's expense. For Exact Match Services Buys Only- In order for a sellers bid to be 'responsive' and considered for award, the seller is REQUIRED to document exactly how they intend to meet the requirements of the SOW. They shall document statement detailing the service for evaluation. Failure to do this may be cause for termination. This information is REQUIRED in order for a sellers bid to be deemed 'responsive' and to be considered for award. For all buys other than Exact Match Sellers MUST document what they are bidding for evaluation for award. Sellers must include, extended specs and/or manufacturer name and part numbers (if applicable). Failure to do this may be cause for termination. This information is REQUIRED in order for a sellers bid to be deemed 'responsive' and to be considered for award. FAR 52.211-6 To be considered for award, all Sellers must be manufacturer/ Federally authorized distributors of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the time frames specified by the Buyer on the award. Sellers may be required to provide documentation as proof of authorization to be considered for award.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/7b48e235123443bf9db2362537e98f3e/view)
- Place of Performance
- Address: 4464 Ralston Dr, MN 55811, USA
- Zip Code: 55811
- Country: USA
- Zip Code: 55811
- Record
- SN05890443-F 20210114/210112230112 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |