SOLICITATION NOTICE
20 -- USCGC STRATTON NR1 SSDG BEARING FAILURE
- Notice Date
- 1/22/2021 3:55:28 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
- ZIP Code
- 94501
- Solicitation Number
- 70Z08521QP4576000
- Response Due
- 1/24/2021 5:00:00 AM
- Archive Date
- 02/08/2021
- Point of Contact
- ERIC FOSTER, Phone: 5104375431, EMILY GREENHOUSE, Phone: 5104375754
- E-Mail Address
-
Eric.T.Foster@uscg.mil, EMILY.E.GREENHOUSE@USCG.MIL
(Eric.T.Foster@uscg.mil, EMILY.E.GREENHOUSE@USCG.MIL)
- Description
- This is a combined synopsis/solicitation for commercial items/services prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Request for Quotations number is 70Z0-8521-Q-P4576000 and is issued as a request for quotations (RFQ). This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-65 dated January 29, 2013. The NAICS Code is 336611. The small business size standard is 1250. This is a total small business set aside. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. All responses from interested vendors must be�received on/before 0800 Pacific Time, JAN 24th, 2021, and will be reviewed by the Government. �� The United States Coast Guard Surface Force Logistics Center has a requirement for the following: �CGC STRATTON #1 GENERATOR BEARING REPLACEMENT THE CTR SHALL PROVIDE TECHNICAL SERVICES AND LABOR TO COMPLETE THE ALIGNMENT AND LOAD TESTING THE #1 SSDG ON BOARD THE CGC STRATTON. THE AFT BEARING EXPERIENCING CONSISTENT OVER HEARTING WHILE IN USE. THE BEARING WILL UNDERGO REPLACEMENT WITH A NEW PROTOTYPE. FOLLOWING THIS REPLACEMENT, ALIGNMENT AND LOAD TESTING WILL NEED TO OCCUR. The CTR shall provide the following: 1. LABOR A. MONITOR AND PROVIDE OEM TECHNICAL INSIGHT AS THE BEARING IS REMOVED AND REPLACED. B. PROVIDE TECHNICAL REPRESENTATIVE QUALIFIED TO PERFORM WORK ON CAT GENERATOR BEARING. C. PROVIDE ALL SPECIAL TOOLS AND 2 QUALIFIED ENGINEERS. 2. ATTEND DAILY PRODUCTION MEETINGS TO INCLUDE A. REVIEW OF PLAN AND REQUIREMENTS WITH SHIP'S PERSONNEL B. COMPLETION OF OEM CHECKLIST IF AVAILABLE C. VALID RAPID GATE CREDENTIALS AND/OR A COMPLETED FILLED OUT ACCESS LIST TEMPLATE (ATTACHED D. N-95 MASKS FOR ALL CTR PERSONNEL WHO GO ONBOARD STRATTON. E .PERFORM ALL WORK IAW SFLC STANDARD SPECIFICATION 0000. 3. CERTIFIED TECHNICIANS TO SUPPLY ALL EQUIPMENT NEEDED TO PERFORM A LOAD TEST IAW WITH PROVIDED INSTRUCTION. A. PROVIDE AT LEAST 250FT OF CABLE B. PROVIDE LOAD BANK AND OPERATING PERSONNEL 4. PROVIDE DETAILED SERVICE REPORT ON FINDINGS AND OBSERVATIONS 5 .CERTIFIED TECHNICIANS TO COMPLETE ALIGNMENT REQUIREMENTS (ATTACHED). A. PERFORM ALIGNMENT AND MEASURE FINAL GENERATOR SHAFT USED TWO DIAL METHOD OR LASER SHAFT ALIGNMENT IN THE PRESENCE OF A CF INSPECTOR B. RECONNECT COUPLING USING A NEW ELASTOMERIC COUPLING PIECE AND INSTALL COUPLING GUARD C. CTR SHALL RE-REAM HOLES AS NECESSARY TO INSTALL ALIGNMENT PINS. D. SUBMIT CFR DOCUMENTING ALL MEASUREMENT AS WELL AS ANY ALIGNMENT DATA IN ACCORDANCE WITH TP 7119. Coast Guard will provide the following: 1. GFE: A. END BELL, ELEC ROTATING EQUIPMENT NIIN: 016602601 P/N: 11466477-001 QTY: 1 B. END FRAME, NON DRIVE END KIT NIIN: 016602607, P/N: 11466469-001 QTY: 1 C. ADDITIONAL VARIOUS EQUIPMENT TO SUPPORT RENEWALOF THE BEARING. 2. TAG OUTS OF ALL INTERFERING EQUIPMENT 3. REMOVE INTERFERENCES 4. ELECTRICAL POWER 5. REMOVAL AND INSTALLATION OF BEARING. 6. CLEAN WORK ENVIRONMENT Description of Problem: THE AFT BEARING EXPERIENCING CONSISTENT OVER HEARTING WHILE IN USE. THE BEARING WILL UNDERGO REPLACEMENT WITH A NEW PROTOTYPE. FOLLOWING THIS REPLACEMENT, ALIGNMENT AND LOAD TESTING WILL NEED TO OCCUR. Location of work to be performed: USCGC STRATTON (WMSL-752) Coast Guard Island Alameda, CA 94501 US Period of Performance: 25JAN-01FEB, 2021 Cutter contact will be provided to selected company. USCGC STRATTON is moored at above address with restricted access. Access to the cutter is gained by establishing communications with vessel point of contact above. Questions and quotes shall be emailed to Eric.T.Foster@uscg.mil and Emily.E.Greenhouse@uscg.mil Contractors are responsible for verifying receipt of quotes. INTERESTED VENDORS PLEASE SIGN AN OFFICIAL QUOTE WITH A SAM.GOV REGISTERED DUNS NUMBER AND EMAIL TO Eric.T.Foster@USCG.MIL and �Emily.E.Greenhouse@uscg.mil.�
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/e2b1b5c5bd7d4f0bb62c4a57b6e42391/view)
- Place of Performance
- Address: Alameda, CA 94501, USA
- Zip Code: 94501
- Country: USA
- Zip Code: 94501
- Record
- SN05898002-F 20210124/210122230100 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |