SOURCES SOUGHT
34 -- Electromagnetic Forming Machine
- Notice Date
- 1/22/2021 5:16:59 AM
- Notice Type
- Sources Sought
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- W4MM USA JOINT MUNITIONS CMD ROCK ISLAND IL 61299-5000 USA
- ZIP Code
- 61299-5000
- Solicitation Number
- W52P1J-21-Q-MTSL
- Response Due
- 2/5/2021 1:00:00 PM
- Archive Date
- 02/20/2021
- Point of Contact
- Lorraine Geren, Cindy K. Wagoner, Phone: 3097820182
- E-Mail Address
-
lorraine.geren.civ@mail.mil, cindy.k.wagoner.civ@mail.mil
(lorraine.geren.civ@mail.mil, cindy.k.wagoner.civ@mail.mil)
- Description
- The Army Contracting Command, Rock Island Contracting Center, is seeking to identify Potential Sources who have the capability to manufacture and provide the following item: Item:� Electromagnetic Forming Machine Description of Item:� The Electromagnetic Forming Machine shall reduce the size of metal tubing (approximately .050� on the diameter) at the point of a mechanical joint between two separate mating tubes/parts, and shall be a 16 Kilojoule (kJ) machine with 460-480VAC, 1 Phase, 6� compression coil, liquid cooled. After an initial maximum energy discharge, the electromagnetic forming machine will take 10 seconds or less for the capacitors to recharge completely, allowing for the second maximum energy discharge from the Electromagnetic forming machine. The electro-magnetic forming machine shall contain (4), 120 Microfarad (uF) sized capacitors, or larger (rated at 8.3 kilo-Volts/kV) OR the electro-magnetic forming machine shall contain eight (8) - 60 microfarad capacitors rated at 10 kV. The forming machine will incorporate quantity (2) ignitron high voltage, high current, mercury switches per capacitor when there are 4 capacitors OR (1) ignitron high voltage, high current, mercury switches per capacitor when there are 8 capacitors. Responses are requested from manufacturers only. The following information is requested: * Brief synopsis of interest and capabilities * Specific statement as to whether your company is the manufacturer of the machine * Experience in manufacturing electromagnetic forming machines * References for recent sales of electromagnetic machines, with a description of the associated item sold * Point of contact to include title, phone number, e-mail address and company Cage Code Responses should be sent to Lorraine Geren, Lorraine.geren.civ@mail.mil and Cindy Wagoner, Cindy.k.wagoner.civ@mail.mil no later than February 5, 2021.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/0983f71d38664174b85bd1f81af70a82/view)
- Record
- SN05898261-F 20210124/210122230101 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |