SOURCES SOUGHT
59 -- ICCP Cables
- Notice Date
- 1/27/2021 5:08:31 AM
- Notice Type
- Sources Sought
- NAICS
- 335931
— Current-Carrying Wiring Device Manufacturing
- Contracting Office
- DLA MARITIME - PORTSMOUTH PORTSMOUTH NH 03801-5000 USA
- ZIP Code
- 03801-5000
- Solicitation Number
- SPMYM3-21-Q-3S04
- Response Due
- 2/3/2021 6:00:00 AM
- Archive Date
- 02/18/2021
- Point of Contact
- Rachel McCluskey, Phone: 2074386818
- E-Mail Address
-
rachel.mccluskey@dla.mil
(rachel.mccluskey@dla.mil)
- Description
- This is a sources sought notice for the following material, not an RFQ.� To the best of the Government's knowledge, EB is the proprietary source of these specifc specifications, making this required restricted to EB and authorized distributors of EB.� Vendors that can provide this material or who have evidence suggesting a different OEM of specifications are encouraged to contact Rachel McCluskey at rachel.mccluskey@dla.mil with the following information: 1.� Company Name 2. POC Information 3. Business Size 4. Manufacturer Size 5.� Cage Code 6. Statement explaining capabilities MATERIAL: ITEM 0001: Plug Assembly, outboard, molded 90 degree (anode), EB P/N 19-87-3222. Manufactured IAW NAVSEA dwg 302-5792287A, assy 502 as modified by NAVSEA dwg 415-7285181A assy 502 Mod 1 and Modification Note 21 (eliminates the leak detector & extension wiring pc�s 19, 20, and 23 of dwg 5792287A). Observe applicable general notes of drawings. Mold with 50 ft of type LSSHOF-3 cable (cable type is changed by Modification Note 10 of drawing 7285181A) per leg and leave other end unterminated. Mold IAW NAVSEA MOLDING MANUAL S9320-AMPRO- 020. The requirement for non-conductive coating (NCC) has been eliminated per note on DWG 5792287A Section B-B. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must -020 approved vendor list. Inspect and test cable assembly IAW MILDTL- 24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs. ITEM 0002: Plug Assembly, outboard, molded 90 degree (anode), EB P/N 19-87-3222. Manufactured IAW NAVSEA dwg 302-5792287A, assy 502 as modified by NAVSEA dwg 415-7285181A assy 502 Mod 1 and Modification Note 21 (eliminates the leak detector & extension wiring pc�s 19, 20, and 23 of dwg 5792287A). Observe applicable general notes of drawings. Mold with 50 ft of type LSSHOF-3 cable (cable type is changed by Modification Note 10 of drawing 7285181A) per leg and leave other end unterminated. Mold IAW NAVSEA MOLDING MANUAL S9320-AMPRO- 020. The requirement for non-conductive coating (NCC) has been eliminated per note on DWG 5792287A Section B-B. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list. Inspect and test cable assembly IAW MILDTL- 24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs. ITEM 0003: Cable Assembly (3 Cable type) 90 degree, EB P/N 19-87-7053 or equivalent. Salient characteristics: EB 4211/16 SPEC SHT (EB4211/16-100). Cable Assembly for EHF end of reference cells. Manufacture IAW EB SPEC 4211 rev D, P/N EB4211/16-100. Cable Assembly consists of MIL-DTL-24231/2-001 connector body (NCC coated) with a three pin insert wired and molded to three 65 foot lengths of type LSSHOF-3 cable. Leave other end of cable unterminated. Plug body must be treated with nonconductive coating (NCC) plasma spray per NAVSEA S9320-AMPRO- 030 using an approved vendor (see attached list). Teledyne D. G. O'Brien�s DGO-1 cathodic delamination resistant coating is also authorized as an alternative to plasma spray. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs. DI-NDTI-80809B applies. ITEM 0004: Cable Assembly (3 Cable type) 90 degree, EB P/N 19-87-7053 or equivalent. Salient characteristics: EB 4211/16 SPEC SHT (EB4211/16-100). Cable Assembly for EHF end of reference cells. Manufacture IAW EB SPEC 4211 rev D, P/N EB4211/16-100. Cable Assembly consists of MIL-DTL-24231/2-001 connector body (NCC coated) with a three pin insert wired and molded to three 65 foot lengths of type LSSHOF-3 cable. Leave other end of cable unterminated. Plug body must be treated with nonconductive coating (NCC) plasma spray per NAVSEA S9320-AMPRO- 030 using an approved vendor (see attached list). Teledyne D. G. O'Brien�s DGO-1 cathodic delamination resistant coating is also authorized as an alternative to plasma spray. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs. DI-NDTI-80809B applies. ITEM 0005: Plug Assembly, outboard, molded, straight (anode); EB P/N: 19-87-3223; Manufactured IAW NAVSEA dwg 302-5792287A Assy 502 as modified by NAVSEA dwg 415-7285181A Assy 502 Mod 2 and modification note 21 (eliminates the leakdetector & extension wiring pc's 19, 20, and 23 of dwg 5792287A); observe applicable general notes of dwgs. Mold with 50 foot of type LSSHOF-3 cable (cable type is changed by modification note 10 of dwg 7285181A) per leg and leave other end unterminated. Mold IAW NAVSEA molding manual S9320-AM-PRO-020. The requirement for non-conductive coating (NCC) has been eliminated per note on dwg 5792287A section b-b. Offeror must furnish, w/offer, evidence of having satisfactorily conducted first article test for M24231 connectors, previously acquired or tested by the government(see section 6.3 of MIL-DTL-24231). Offerors must also be listed on the NAVSEA S9320-AM-PRO- 020 approved vendor list; offeror may utilize a vendor who can provide, w/offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list; inspect and test cable assy IAW MIL-DTL-24231E(sh) dtd 26April2013 table 1 Quality Conformance Type 1 for molded plugs; D-NDTI-80809B applies. ITEM 0006: Cable Assembly (4 cable type) 90 degree, EB P/N 19-87-7054 or equivalent; salient characteristics: EB 4211/16 spec sht (EB4211/16-200) cable assy for EHF end of ref cells; Manufactured IAW EB Spec 4211 Rev-D, P/N EB4211/16-200; cable assy consists of MIL-DTL-24231/2-002 connector body (NCC coated) w/a 4 pin insert wired and molded to four 65 foot lengths of type LSSHOF-3 cable. Leave other end of cable unterminated. Plug body must be treated with non conductive coating (NCC) plasma spray per NAVSEA S9320-AM-PRO-030 using approved vendor; offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government( see section 6.3 of MIL-DTL-24231); offerors must also be listed on NAVSEA S9320-AM-PRO-020 approved vendor list (attached); offeror may utilize a vendor who can provide, w/offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on NAVSEA S9320-AMPRO- 020 approved vendor list; inspect and test cable assy IAW MIL-DTL-24231E(sh) dtd 26April 2013 table 1 Quality Conformance Type 1for molded plugs; DI-NDTI-80809B applies. ITEM 0007: Cable Assembly (4 cable type) 90 degree, EB P/N 19-87-7054 or equivalent; salient characteristics: EB 4211/16 spec sht (EB4211/16-200) cable assy for EHF end of ref cells; Manufactured IAW EB Spec 4211 Rev-D, P/N EB4211/16-200; cable assy consists of MIL-DTL-24231/2-002 connector body (NCC coated) w/a 4 pin insert wired and molded to four 65 foot lengths of type LSSHOF-3 cable. Leave other end of cable unterminated. Plug body must be treated with non conductive coating (NCC) plasma spray per NAVSEA S9320-AM-PRO-030 using approved vendor; offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government( see section 6.3 of MIL-DTL-24231); offerors must also be listed on NAVSEA S9320-AM-PRO-020 approved vendor list (attached); offeror may utilize a vendor who can provide, w/offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on NAVSEA S9320-AMPRO- 020 approved vendor list; inspect and test cable assy IAW MIL-DTL-24231E(sh) dtd 26April 2013 table 1 Quality Conformance Type 1for molded plugs; DI-NDTI-80809B applies. ITEM 0008: 90 degree anode plug assy outboard molded, EB PN 19-87-3222MOD; detailed 15-9-2A dwg 8357287, dwg 5792287 Assy 502, MOD 3; dwg H535-0510 modifies dwg 5792287, see dwg H535-0510A1 for MOD 3 (TVD to H535-0510), molded with 108 inches LSSHOF-23. Mold IAW NAVSEA MOLDING MANUAL S9320-AM-PRO-020. The requirement for non-conductive coating (NCC) has been eliminated per note on DWG 5792287A Section B-B. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs. ITEM 0009: Plug Assembly, 3 cable, ref cell outboard; EB PN 19-87-7053SALT, EB4211/16-100A Made with 100 feet of LSSHOF-23, see detail 15-10-2C. FAT certification required. Leave other end of cable unterminated. Plug body must be treated with nonconductive coating (NCC) plasma spray per NAVSEA S9320-AMPRO- 030 using an approved vendor (see attached list). Teledyne D. G. O'Brien�s DGO-1 cathodic delamination resistant coating is also authorized as an alternative to plasma spray. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs. DI-NDTI-80809B applies. ITEM 0010: Plug Assembly, 3 cable, ref cell outboard; EB PN 19-87-7053SALT, EB4211/16-100A Made with 100 feet of LSSHOF-23, see detail 15-10-2A. FAT certification required. Leave other end of cable unterminated. Plug body must be treated with nonconductive coating (NCC) plasma spray per NAVSEA S9320-AMPRO- 030 using an approved vendor (see attached list). Teledyne D. G. O'Brien�s DGO-1 cathodic delamination resistant coating is also authorized as an alternative to plasma spray. Offeror must furnish, with offer, evidence of having satisfactorily conducted first article testing for M24231 connectors previously acquired or tested by the government (see section 6.3 of MIL-DTL-24231), Offerors must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list (see attachment). Offeror may utilize a vendor who can provide, with offer, evidence of a satisfactorily conducted first article test for M24231 connectors, that vendor must also be listed on the NAVSEA S9320-AM-PRO-020 approved vendor list. Inspect and test cable assembly IAW MIL-DTL-24231E (SH) dtd 26APRIL2013 table 1 quality conformance type 1 for molded plugs. DI-NDTI-80809B applies.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/6d63b30b639d4c36a7759f975a2c16e8/view)
- Place of Performance
- Address: Kittery, ME 03904, USA
- Zip Code: 03904
- Country: USA
- Zip Code: 03904
- Record
- SN05901907-F 20210129/210127230117 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |