SOURCES SOUGHT
99 -- Maintenance Dredging of Hudson River, NY City to Waterford, NY, Federal Navigation Project
- Notice Date
- 1/29/2021 4:29:06 AM
- Notice Type
- Sources Sought
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- New York New York NY 10278-0090
- ZIP Code
- 10278-0090
- Solicitation Number
- W912DS21S0018
- Response Due
- 2/13/2021 11:00:00 AM
- Archive Date
- 02/28/2021
- Point of Contact
- Orlando Nieves, Nicholas P. Emanuel, Phone: 9177908069
- E-Mail Address
-
orlando.nieves@usace.army.mil, Nicholas.P.Emanuel@usace.army.mil
(orlando.nieves@usace.army.mil, Nicholas.P.Emanuel@usace.army.mil)
- Description
- The New York District of the U.S. Army Corps of Engineers (USACE) proposes to perform maintenance dredging of the Hudson River, NY City to Waterford, New York, Federal Navigation Project.� The dredged material would be transported to and placed into a government furnished upland dredge material placement site. The proposed maintenance dredging would remove approximately 36,000 cubic yards of critical shoals from the Port of Albany Turning Basin. Dredging would be required to a depth of -32 feet Mean Low Water (MLW) plus 1 foot allowable overdepth.� The dredged material is expected to consist primarily of silt and clay. Due to the physical characteristics and dimensions of the turning basin, and conditions found in the water quality certificate, the proposed work can only be performed by utilizing a mechanical dredge with a closed clamshell environmental bucket. Additionally, multiple barges and tug boats will be needed to perform the work during the dredging and unloading/placement operations. All necessary permits required for the dredging and dredged material placement (other than the NYS PARKS permit for equipment transport through Schodack Island State Park; the contractor�must coordinate directly with NYS PARKS) will be provided by the government.� The contractor will be required to meet all conditions pertaining to the dredging and dredge material placement as specified in these permits. The contractor will also be required to prepare the existing dredge material placement site, including existing earthen containment dikes, and weirs, prior to the placement of any dredge material.� Most significantly, the contract�s scope of work will include the grading material found within the existing cells. �� Water Quality restrictions preclude performing any in-water dredging work outside the window provided in the contract.� To successfully complete dredging of required material within the contract window allowed for in-water work, the contractor must be prepared to maintain a minimum average daily dredging production rate of 350 cubic yards of pay material.� Maintaining an acceptable production rate will be critical to the successful completion of the contract work and will minimize the duration of impacts to ship traffic using the Port of Albany Turning Basin. The majority of the proposed work, including all of the in-water dredging work which shall commence no earlier than September 1st, is anticipated to take place between July and December 2021.� The work is currently estimated to cost in the range of $1,000,000 to $10,000,000. SURVEY OF THE DREDGING INDUSTRY The following is a confidential survey questionnaire designed to apprise the Corps of prospective dredging contractors� project execution capabilities. Please provide your response to the following questions. All questions are in regard to the maintenance dredging of the Hudson River, NY, Federal Navigation Project. General 1.� Have you ever worked on dredging jobs similar in nature to this project? If so, please describe the project and for whom the work was performed. Identify a point of contact and phone number, if possible. 2.� What percentage of work (volume of material dredged, transported, dewatered processed, and ultimately placed) can you perform with your own equipment or equipment owned by another small dredging contractor? 3.� Have you performed dredging within the deep draft waters of the Hudson River, NY, Federal Navigation Project? 4.� Would you be willing to bid on the project described? If the answer is No, please explain why not? 5.� Would you be bidding on this project as a sole contractor, prime contractor with subcontractor(s) or as a joint venture? 6.� Is there a dollar limit on the size of contract that you would bid? 7.� What is the largest dredging contract, in dollars, on which you were the prime contractor? 8.� What is your bonding capacity per contract? What is your total bonding capacity? Equipment 1.� What type of dredge equipment do you own and / or operate that is suitable for the work described? �Do you own a closed environmental clamshell bucket?� Please list each piece of equipment capable of performing each type of work described, i.e. dredging, transportation and final disposal of the material. �For each dredge that you list, please specify its bucket size(s), and any other salient characteristics. 2.� Identify which dredge(s), including support equipment (tug, scows, etc), you would employ on this project. Also, for each dredge, identify the digging depth. 3.� How many material scows do you have available for use? Please list the name of the scow, its type, and the capacity. 4.� Do you have experience with the placement of dredged material in upland placement sites?� Do you have any experience operating hydraulic unloader equipment/systems to rehandle the dredge material from a scow/barge, and pump it into an upland placement site?� If so, do you own, or would you rent this equipment?� If not; would you utilize a subcontractor? �� ��5.� Please list any history with the dredging and placement of non-HARS material. Also list the processing and placement sites used to place the material.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/e735ecb608184118815e355a95457a56/view)
- Place of Performance
- Address: Hudson, NY, USA
- Country: USA
- Country: USA
- Record
- SN05904187-F 20210131/210129230105 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |