Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF FEBRUARY 14, 2021 SAM #7017
MODIFICATION

16 -- C-5 Pressure Divider NSN: 4820-01-452-8261UC

Notice Date
2/12/2021 6:54:18 AM
 
Notice Type
Solicitation
 
NAICS
332911 — Industrial Valve Manufacturing
 
Contracting Office
DLA AVIATION AT WARNER ROBINS, GA ROBINS A F B GA 31098-1813 USA
 
ZIP Code
31098-1813
 
Solicitation Number
SPRWA1-21-R-0017
 
Response Due
3/12/2021 1:00:00 PM
 
Archive Date
03/27/2021
 
Point of Contact
Todd Stimus, Phone: 4782228413
 
E-Mail Address
todd.stimus@us.af.mil
(todd.stimus@us.af.mil)
 
Description
The Defense Logistics Agency, Robins AFB, GA, will acquire a quantity of 33 �Pressure Dividers� in support of the C-5 Galaxy sustainment. The �Pressure Divider� is part of the hydraulic manifold assembly that controls the C-5 Pitch Trim Actuator�s Nut Drive Motor. The Pitch Trim Actuator positions the entire horizontal stabilizer assembly for pitch trim of the C-5 aircraft. Requires proof pressure, working pressure, and flow rate testing. Individual metal components all require Non-Destructive Inspection prior to assembly Anodized Aluminum cap 440C Stainless Steel, per .0002 to .0003 diametric clearance matched diameter between spool and sleeve Concentricity requirements as precise as 0.005 inches Parts require heat treatment and cold stabilization IAW SAE AMS 2759/5 TYPE 3, CLASS A, with cryogenic soak between tempers. Dimensions; Unit Weight: 0.5 lbs Unit Size: 6.3in x 5.3in x 3in Unit Pack Cube: 0.057 cu ft. Manufacture of parts for C-5 hydraulic manifolds requires strict control of processes to ensure adherence to very close tolerances during machining of specified material. Special machining equipment is required to produce the precisely manufactured part surfaces. Consistent manufacturing processes are necessary to ensure that the manifold components are manufactured such that the Pitch Trim Actuator assembly provides precise control of the horizontal stabilizer incidence during flight. Failure of the Pitch Trim Actuator to position the horizontal stabilizer could place the aircraft and crew in an extremely hazardous situation due to the pilots being unable to properly trim the aircraft for its flight condition, resulting in very heavy forces being required of the pilots to maintain level flight. Flight safety histories indicate that aircrew task saturation as a result of component failures dramatically increases the risk of an aircraft mishap if they occur in critical phases of flight. If the failure occurs under these conditions there is a risk of loss of life and/or aircraft. The technical data package for the pressure dividers is maintained by the United States Government, however, Thomas Instruments Inc., Cage: 5H860 is the only qualified source found. This is a sole source requirement under FAR 6.302-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements, under which the Government intends to solicit and negotiate with only Thomas Instruments Inc., Cage: 5H860. A Request for Proposal is attached to this notice.� Thomas Instruments Inc, is the Original Equipment Manufacturer (OEM) of the above mentioned SRUs. Thomas is the only known source with adequate knowledge of the Pressure Divider design, performance requirements, and possession of the required technical data and capabilities needed to produce this item and ensure compatibility with the C-5 Galaxy aircraft. In accordance with FAR 5.207(c)(16)(ii) responsible sources may identify their interest and capability to respond to the requirement. The notification should contain Company Name, Address, Point of Contact, CAGE, and size of business pursuant to NAICS code 332911. All potential offerors should contact the buyer/PCO identified herein for additional information or comments. Please provide responses to todd.stimus@us.af.mil by 4:00 P.M. EST on the above stated Response Date.�
 
Web Link
SAM.gov Permalink
(https://beta.sam.gov/opp/d767e8545c664befb1384ebee6d8bc15/view)
 
Place of Performance
Address: Warner Robins, GA 31098, USA
Zip Code: 31098
Country: USA
 
Record
SN05915681-F 20210214/210212230117 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.