Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF FEBRUARY 25, 2021 SAM #7028
SOLICITATION NOTICE

H -- AST API 653 STI 001 Fuel Removal and Internal Inspection: Ft. Bliss Texas

Notice Date
2/23/2021 10:57:35 AM
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
541990 — All Other Professional, Scientific, and Technical Services
 
Contracting Office
W071 ENDIST OMAHA OMAHA NE 68102-4901 USA
 
ZIP Code
68102-4901
 
Solicitation Number
W9128F21R0045
 
Response Due
3/12/2021 10:00:00 AM
 
Archive Date
03/27/2021
 
Point of Contact
Steve Engen, Phone: 4029952233, Denise M. Fricke, Phone: 4029952057
 
E-Mail Address
Steven.d.engen@usace.army.mil, Denise.M.Fricke@usace.army.mil
(Steven.d.engen@usace.army.mil, Denise.M.Fricke@usace.army.mil)
 
Small Business Set-Aside
SBA Total Small Business Set-Aside (FAR 19.5)
 
Description
Remove and dispose of 250 gallons of fuel product for Tanks 11113 and 11114.��Perform an Internal AST inspection to include visual inspection of the containment area on tanks 11113 and 11114. These inspections must be phased. At no time will both tanks be out of service during these inspections. Coordination must be made with the installation before inspection.� On tanks 11113 and 11114, existing wiper seals (foam log, double wiper etc.) shall be removed and completely replaced with a new double wiper seal in accordance with UFGS 33 56 21.17 and the IFR manufacturer's recommendations; penetration seals in floating pan will also need to be replaced.� Perform an external AST inspection to include visual inspection of the containment area on STI Tanks 13467, 13468, 8604E, 8604C, 8243E, and 8243C.� Any fuel or residual product that will be disposed of the contractor will be responsible to coordinate with environmental and safety authorities having jurisdiction to obtain and execute required permits, manifests, etc. Clean the tank and perform an internal AST inspection to also include the visual inspection of the containment area.� Tank cleaning shall be done in accordance with UFGS 33 01 50.60. The tank Inspection shall be in conformance with applicable industry standards API 653, NFPA 30, NFPA 326, UFGS 33 01 50.60, and in compliance with 40 CFR 112, UFC 3-460-01, UFC 3-460-03 and any other applicable federal, state, local, service or host nation requirements. At a minimum, table 8-1 within UFC 3-460-01 shall be followed. Drain Line and Release Valve shall be Hydrostatically tested.� The Contractor shall perform a hydrostatic test to ensure the drainpipe and release valve do not leak.� Test in accordance with applicable requirements of AWWA C600 for hydrostatic testing.� Ensure the release valve is closed and pressurize the end of the pipe within the containment basin sump.� Test for leakage by filling the pipe with water and pressurizing to 10 psi using a suitable pump connected to the pipeline. The test pressure shall not vary by more than �1 psi for the duration of the test.� Hold this pressure for not less than 2 hours.� If the system does not hold pressure, check the outfall point to see if water is bypassing the valve.� Test pressure shall be maintained during the test by adding makeup water through the pressure test pump into the pipeline. �Accurately note the amount of makeup water required to maintain pressure during the test.� Containment Drain Inlet.� The Contractor shall perform a hydrostatic test to ensure the integrity of the inlet sump.� Test for leakage by filling the inlet with water to a level at least 1-2 inches above the top of the inlet structure.� The inlet shall hold this water for not less than 2 hours with no measurable change in the water level.� Provide telecon out briefing for OOS inspections.� Provide legible tank stencil or label on tanks 11113 & 11114 consisting of black letters at least 1� in height, stating the date cleaned and inspected. Update 23 Feb 2021: Question and Answer and Attachment included in Attachments Section
 
Web Link
SAM.gov Permalink
(https://beta.sam.gov/opp/cfd7bda8af7d4e9ca6f59d47b70d960d/view)
 
Place of Performance
Address: El Paso, TX 79906, USA
Zip Code: 79906
Country: USA
 
Record
SN05923986-F 20210225/210223230111 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.