SOURCES SOUGHT
16 -- CM20323003 SOURCES SOUGHT
- Notice Date
- 3/3/2021 4:28:57 PM
- Notice Type
- Sources Sought
- NAICS
- 333995
— Fluid Power Cylinder and Actuator Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX21R0074
- Response Due
- 3/11/2021 10:00:00 AM
- Archive Date
- 03/26/2021
- Point of Contact
- Scott Knowles614-692-0639, Phone: 6146920639
- E-Mail Address
-
Scott.Knowles@dla.mil
(Scott.Knowles@dla.mil)
- Description
- ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10. NO SOLICITATION IS BEING ISSUED AT THIS TIME. � The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below.� Please review the below NSNs and provide us with any additional sources that are able to manufacture these items.� Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information.� All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil.� Phone 614 692-0639. We thank you in advance for your assistance. NSN��������������������� �������������� ������������������������������� ��������������� 1650012783656 PISTON,LINEAR ACTUA 3040010106500 SHAFT,BRAKE VALVE 4320011952478 HOUSING ASSEMBLY,PU 4320012766097 ROTOR,PUMP 4820009910785 VALVE,REGULATING,FL 4820010075367 VALVE,BLEED 4820011939907�VALVE,BLEEDER,HYDRA 4820012224421�VALVE,SAFETY RELIEF 5945010378335�SOLENOID,ELECTRICAL Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. CLIN 0001 NSN: 1650012783656 PISTON, LINEAR ACTUATING CYLINDER. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT�� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES�� PART NUMBER 1211162-130 ONLY. CA061: ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE ���� OFFERS IS NOT AVAILABLE AT THE PROCUREMENT ���� AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE ���� DATA PACKAGE INCLUDING DATA FOR THE APPROVED ���� AND ALTERNATE PART FOR EVALUATION. � � CRITICAL APPLICATION ITEM ���� ARKWIN INDUSTRIES, INC. 98391 P/N 1211162-130 � � PREP FOR DELIVERY�� � � �PKGING DATA-QUP:001 ����� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ---------------------------------------------------------- CLIN 0002 NSN: 3040010106500 SHAFT, BRAKE VALVE.� � RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � ���FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES E/I A-10A AIRCRAFT. CA060: NO DATA IS AVAILABLE.� THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION. ARKWIN INDUSTRIES, INC. 98391 P/N 0711289-203 PREP FOR DELIVERY ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ----------------------------------------------------------- CLIN 0003 NSN: 4320011952478 HOUSING ASSEMBLY, PUMP RD002, COVERED DEFENSE INFORMATION APPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ��� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES CA060: NO DATA IS AVAILABLE.� THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION. CRITICAL APPLICATION ITEM ARKWIN INDUSTRIES, INC. 98391 P/N 1311024-256 PREP FOR DELIVERY ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ---------------------------------------------------------- CLIN 0004 NSN: 4320012766097 ROTOR, PUMP. (HAND PUMP - RESERVOIR FILL) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ032: EXPORT CONTROL OF TECHNICAL DATA ��� �This item has technical data some or all of which is subject to ���� export-control of either the International Traffic in Arms regulations ���� (ITAR) or the Export Administration Regulations (EAR), and cannot be ���� exported without prior authorization from either the Department of State ���� or the Department of Commerce. Export includes disclosure of technical ���� data to foreign persons and nationals whether located in the United ���� States or abroad. This requirement applies equally to foreign national ���� employees and U.S. companies and their foreign subsidiaries. DFARS ���� 252.225-7048 is applicable to this data. ���� The Defense Logistics Agency (DLA) limits distribution of export-control ���� technical data to DLA contractors that have an approved US/Canada Joint ���� Certification Program (JCP) certification, have completed the ���� Introduction to Proper Handling of DOD Export-Controlled Technical Data ���� Training and the DLA Export-Controlled Technical Data Questionnaire ���� (both are available at the web address given below), and have been ���� approved by the DLA controlling authority to access the ���� export-controlled data. Instructions for obtaining access to the ���� export-controlled data can be found at: ���� https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ ���� To be eligible for award, offerors and any sources of supply proposed ��� �for use are required to have an approved JCP certification and have ���� been approved by the DLA controlling authority to access ���� export-controlled data managed by DLA. DLA will not delay award in ���� order for an offeror or its supplier to apply for and receive approval ���� by the DLA controlling authority to access the export-controlled data. RD002, COVERED DEFENSE INFORMATION APPLIES CA060: NO DATA IS AVAILABLE.� THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) CS120: NOTE:� THE CITED DRAWING IS A SOURCE CONTROLLED ���� DRAWING AND AS OF THE DATE OF THIS SOLICITATION ���� ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE ���� BEEN APPROVED.� EVEN THOUGH SOURCES AND APPROVED ���� PART NUMBERS ARE PROVIDED, THE ITEMS � ���FURNISHED MUST MEET THE REQUIREMENTS OF THE ���� CITED DRAWING.� OFFERORS WHO ARE INTERESTED IN ���� QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ���� ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ���� ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED ���� DRAWING. ���� ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES ���� THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT ���� THIS TIME. CS150: THIS NSN SHALL BE PHYSICALLY IDENTIFIED I/A/W MIL-STD-130. ���� CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE ���� USED NOR INCORPORATED IN ANY ITEMS TO BE ���� DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION ���� SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT ���� DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. ���� SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR ���� APPROVAL UNLESS THEY ARE AUTHORIZED BY THE ���� SPECIFICATION REQUIREMENTS. CRITICAL APPLICATION ITEM ARKWIN INDUSTRIES, INC. 98391 P/N 1311025-001 ���� IAW BASIC DRAWING NR 78286 65664-03802 ���� REVISION NR C�� DTD 04/15/1995 ���� PART PIECE NUMBER: 65664-03802-101 PREP FOR DELIVERY ���� PGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ----------------------------------------------------------- CLIN 0005 NSN: 4820009910785 VALVE, REGULATING, FLUID PRESSURE. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� BODY MATERIAL: ALUMINUM ALLOY; SEAT MATERIAL: STEEL CORROSION RESISTING ���� TEMP RATING: -65 DEG F MIN TO 275 DEG F MAX; MAX INLET PRESS. RATING: ���� 3000 PSI AND OUTLET PRESS. SETTING: 1275 PSI. CS241: NOTE: THIS IS A RESTRICTED SOURCE ITEM AND ���� REQUIRES ENGINEERING SOURCE APPROVAL BY THE ���� GOVERNMENT DESIGN CONTROL ACTIVITY. ���� CA061: ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE ���� OFFERS IS NOT AVAILABLE AT THE PROCUREMENT ���� AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE ���� DATA PACKAGE INCLUDING DATA FOR THE APPROVED ���� AND ALTERNATE PART FOR EVALUATION. CRITICAL APPLICATION ITEM ARKWIN INDUSTRIES, INC. 98391 P/N 3A004 PREP FOR DELIVERY ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ----------------------------------------------------------- CLIN 0006 NSN: 4820010075367 VALVE, BLEED. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES E/I:� AIRCRAFT MODEL A-10A CA060: NO DATA IS AVAILABLE.� THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION. CRITICAL APPLICATION ITEM ARKWIN INDUSTRIES, INC. 98391 P/N 0711289-103 PREP FOR DELIVERY ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ----------------------------------------------------------- CLIN 0007 NSN: 4820011939907 VALVE, BLEEDER, HYDRAULIC SYSTEM. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES CA060: NO DATA IS AVAILABLE.� THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION. CRITICAL APPLICATION ITEM ARKWIN INDUSTRIES, INC. 98391 P/N 1311023-110 PREP FOR DELIVERY ���� PKGING DATA-QUP:001 ���� WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ----------------------------------------------------------- CLIN 0008� NSN: 4820012224421 VALVE,SAFETY RELIEF�� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� ALUMINUM ALLOY 2024 BODY ���� MEDIA: OIL LUBRICATING, DIESTER ���� BASE; MAX OPER PRESSURE: 3000 PSI ���� MAX OPER TEMP: 275 DEG F; OPEN ���� PRESSURE SETTING: 4 PSI CA062: THE PROCUREMENT AGENCY HAS DATA ADEQUATE FOR ���� EVALUATION PURPOSES, BUT LIMITED RIGHTS APPLY. ���� THE OFFEROR NEED PROVIDE ONLY ITS DATA FOR ���� EVALUATION. RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a�shelf life of 180 months (non-extendable) applies to this item. RS069: Shelf life requirement RS001 for a TYPE 2 (CODE X) item with a�shelf life of 180 month (extendable) applies to this item. CRITICAL APPLICATION ITEM ARKWIN INDUSTRIES, INC. 98391 P/N 0711324-305-6 PREP FOR DELIVERY ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:AE� CLNG/DRY:1� PRESV MAT:00 ���� WRAP MAT:DA� CUSH/DUNN MAT:NA� CUSH/DUNN THKNESS:D ���� UNIT CONT:D3� OPI:O ���� INTRMDTE CONT:DO� INTRMDTE CONT QTY:AAA ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:33 -33 Type II, shelf life ����� PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING ����� REQUIREMENTS FOR PROCUREMENT ------------------------------------------------------------------------ CLIN 0009� NSN: 5945010378335 SOLENOID,ELECTRICAL RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES E0165: THE TECHNICAL DATA CITED IN THIS SOLICITATION IS ���� NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST ���� MEET THE REQUIREMENTS OF THE CITED TECHNICAL ���� DATA IN ADDITION TO THE REQUIREMENTS OF THE ���� PART NUMBERED ITEM LISTED ON THIS SOLICITATION. EDL01: DATA LIST E0116: ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE ���� OFFERS IS NOT AVAILABLE AT THE PROCUREMENT ���� AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE ���� DATA PACKAGE INCLUDING DATA FOR THE APPROVED ���� AND ALTERNATE PART FOR EVALUATION. E0114: THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE ���� (ODS) IN THE DESIGN, MANUFACTURING, TESTING, ���� CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM ���� UNDER ANY MILITARY OR FEDERAL SPECIFICATION, ���� STANDARD OR DRAWING REFERENCED IN THIS ITEM ���� DESCRIPTION IS ""PROHIBITED"" UNLESS THE SEPARATE ���� WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS ���� OBTAINED.� THIS PROHIBITION SUPERSEDES ALL ���� SPECIFICATION REQUIREMENTS BUT DOES NOT ���� ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. ���� THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS ���� DEFINED IN ""FAR 11.001"" OR TO PART-NUMBERED- ���� ONLY ITEMS. CRITICAL APPLICATION ITEM ARKWIN INDUSTRIES, INC. 98391 P/N 0711288-100 PREP FOR DELIVERY ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:41� CLNG/DRY:1� PRESV MAT:00 ���� WRAP MAT:ZZ� CUSH/DUNN MAT:NA� CUSH/DUNN THKNESS:C ���� UNIT CONT:ZZ� OPI:M ���� INTRMDTE CONT:D3� INTRMDTE CONT QTY:AAA ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:ZZ -ZZ Special Requirements ZD009: UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH ���� (a) In addition to all other marking requirements in this contract, the ���� Contractor shall apply one of the ���� assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of ���� IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit ���� boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify ���� Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of ���� the item being acquired. Placement of the markings shall be in ���� accordance with paragraph 6.1 of the standard. ���� (b) Copies of the current version of this standard may be purchased or ���� downloaded from the Association ���� Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid ���� State Technology Association ���� (JEDEC), http://www.jedec.org. -----------------------------------------------------------
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/ba6819498e0d4c65a1c5b30269446cb0/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN05932566-F 20210305/210303230117 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |