SAMDaily.us | PRESOL | 66 | SMALL BUSINESS SET-ASIDE FOR An atomic force microscope capable of providing images in the following modes: non-contact, contact, lateral force microscopy, force modulation, force spectroscopy and lithography.

SAMDAILY.US - ISSUE OF MARCH 10, 2021 SAM #7041
SOLICITATION NOTICE

66 -- SMALL BUSINESS SET-ASIDE FOR An atomic force microscope capable of providing images in the following modes: non-contact, contact, lateral force microscopy, force modulation, force spectroscopy and lithography.

Notice Date: 3/8/2021 10:33:10 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 334516 — Analytical Laboratory Instrument Manufacturing
Contracting Office: W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
ZIP Code: 20783-1197
Solicitation Number: W911QX-21-Q-0053
Response Due: 3/15/2021 8:59:00 AM
Archive Date: 03/30/2021
Point of Contact: Adrian Barber, Phone: 3013941503
E-Mail Address: adrian.t.barber.civ@mail.mil
(adrian.t.barber.civ@mail.mil)
Description: Description: Disclaimer: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.� This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. NOTICE: THIS PROCUREMENT WILL BE CONDUCTED USING A TIERED EVALUATION OF OFFERS. THE FOLLOWING PROCEDURES WILL BE UTILIZED: � THIS A SMALL BUSINESS SET-ASIDE THAT WILL CONVERT TO FULL AND OPEN COMPETITION IF NO ACCEPTABLE OFFERS ARE RECEIVED FROM RESPONSIBLE, SMALL BUSINESS CONCERNS. FOR OFFERS TO BE CONSIDERED ACCEPTABLE, THEY MUST MEET ALL TECHNICAL REQUIREMENTS CONTAINED IN THE SOLICITATION AND BE competitive in terms of market prices, quality, and delivery. If ONLY ONE ACCEPTABLE OFFER IS RECEIVED FROM A RESPONSIBLE, SMALL BUSINESS CONCERN, THE CONTRACTING oFFICER WILL CONSIDER AWARDING DIRECTLY TO THAT FIRM, PRIOR TO THE DISSOLUTION OF THE SMALL BUSINESS SET-ASIDE. NO AMENDMENT WILL BE ISSUED TO CONVERT THE SOLICITATION TO FULL AND OPEN COMPETITION. IF THE SMALL BUSINESS SET-ASIDE IS DISSOLVED, THE GOVERNMENT WILL AWARD TO THE LARGE BUSINESS WHOSE OFFER IS MOST ADVANTAGEOUS TO THE GOVERNMENT, BASED ON THE REQUIREMENTS AND EVALUATION CRITERIA SET FORTH IN THIS SOLICITATION. ALL INTERESTED PARTIES ARE ENCOURAGED TO RESPOND, REGARDLESS OF BUSINESS SIZE; HOWEVER, THEY MUST DO SO AT THEIR OWN RISK, TAKING INTO ACCOUNT THAT THIS IS A SMALL BUSINESS SET-ASIDE first, AND FULL AND OPEN COMPETITION ONLY AFTER THE ABOVE CRITERIA IS NOT MET. � This acquisition is issued as a Request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-04. For purposes of this acquisition, the associated NAICS code is 334516.� The small business size standard is 1,000 employees. Contract Line Item (CLIN) Structure: The following is a list of contract line item number(s) and items, quantities and units of measure, (including option(s), if applicable): CLIN 0001-�One (1) Atomic Force Microscope (AFM) System Specifications/Requirement: � The contractor shall deliver one (1) atomic force microscope system to Aberdeen Proving Ground (APG) that meets the following requirements: Capable of a minimum X-Y scan range of 100 micrometers by 100 micrometers. Capable of a minimum Z range of 10 micrometers with closed loop Z control. Capable of tapping mode (also called non-contact mode or dynamic force mode) imaging with phase contrast mode. Capable of contact mode (also called static force) imaging. Capable of lateral force mode operation. Capable of magnetic force microscopy measurements. Capable of force-distance spectroscopy measurements. Capable of imaging in fluids including water and mineral oil. X-Y stage capable of accommodating samples that are at least 20 millimeters by 20 millimeters in area and up 4 millimeters in height. Stage must be capable of movement in the X and Y directions. Active or passive vibration isolation must be provided. �Integrated camera that provides a top view of the cantilever and sample surface �Computer and software necessary to operate the atomic force microscope in all the modes mentioned above and perform image analysis, particularly quantification of surface roughness. Software and hardware must allow for calibration of cantilever spring constants and quality factor calculation. �Installation of the system at Aberdeen Proving Ground, MD along with training (minimum of one day) � � Delivery: Delivery is required ninety (90) days after receipt of order (ARO). Delivery shall be made to US Army Research Laboratory, Logistics Warehouse, Building 321, 6375 Johnson Road Aberdeen Proving Ground, MD 21005. Acceptance shall be performed at US Army Research Laboratory, Logistics Warehouse, Building 321, 6375 Johnson Road Aberdeen Proving Ground, MD 21005. The FOB point is Destination. � Clauses: � The provision at 52.212-1, Instructions to Offerors � Commercial, applies to this acquisition.� The following addenda have been attached to this provision: � In addition to the requirements set for the in FAR 52.212-1, all offers responding to this solicitation must provide their business size in relation to the NAICS code contained in this solicitation and shall identify any socioeconomic categories to which they belong. Evaluation Criteria - The specific evaluation criteria to be used are as follows:� � In accordance with FAR 13.106-2(b)(3), comparative evaluation procedures will be utilized. Comparative evaluation is the comparison of all offers received in response to this solicitation against each other. An item-by-item comparison of each offer to one another will be performed to determine which offer provides the most benefit to the Government. �Award will be made to the offer that is most advantageous to the Government. The Government may award to the lowest priced offeror that meets the Government�s minimum requirements; however, the Government reserves the right to award to a higher priced offeror exceeding the minimum requirements if it is most advantageous to the Government. In order to be considered for award, an offer must meet the Government�s minimum technical requirement contained in this solicitation. The below evaluation factors will be utilized during evaluation (in no order of relative importance): Price Technical Capabilities/Specification Past Performance Offerors shall include a completed copy of the provision at FAR 52.212-3 (with its Alternate I), Offeror Representations with its offer. � The clause at 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following addenda have been attached to this clause: NONE � The clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items and the selected clauses listed in DFARS 212.301 Solicitation provisions and Contract Clauses for the Acquisition of Commercial Items, applies to this acquisition.� The following additional FAR/DFARS clauses cited in this clause are applicable: � FAR: 52.204-10, REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (JUL 2013) 52.209-6, PROTECTING THE GOVERNMENT� INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (OCT 2015) 52.219-6, NOTICE OF SMALL BUSINESS SET-ASIDE (MAR 2020) (DEVIATION 2020-O0008) 52.219-28, POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013) 52.222-3, CONVICT LABOR (JUN 2003) 52.222-19, CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (JAN 2020) (DEVIATION 2020-O0019) 52.222-21, PROHIBITION OF SEGREGATED FACILITIES (FEB 1999) 52.222-26, EQUAL OPPORTUNITY (MAR 2007) 52.222-36, AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (JUL 2014) 52.222-50, COMBATING TRAFFICKING IN PERSONS (JAN 2019) 52.223-18, ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) 52.225-13, RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) 52.232-33, PAYMENT BY ELECTRONIC FUNDS TRANSFER�CENTRAL CONTRACTOR REGISTRATION (JUL 2013) 52.232-36, PAYMENT BY THIRD PARTY (MAY 2014) DFARS: *252.203-7005, REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) *252.204-7008, COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) 252.204-7015, DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016) *252.204-7016, COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES�REPRESENTATION (DEC 2019) *252.204-7017, PROHIBITION ON THE ACQUISITON OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES�REPRESENTATION (DEC 2019) 252.204-7018, PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES (DEC 2019) 252.223-7008, PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013) *252.225-7035, BUY AMERICAN STATUTE�FREE TRADE AGREEMENTS�BALANCE OF PAYMENTS PROGRAM CERTIFICATE (NOV 2014) (DEVIATION 2020-O0019) 252.225-7036, BUY AMERICAN�FREE TRADE AGREEMENTS�BALANCE OF PAYMENT PROGRAM (DEC 2017) (DEVIATION 2020-O0019) *252.225-7974, REPRESENTATION REGARDING BUSINESS OPERATIONS WITH THE MADURO REGIME (FEB 2020) (DEVIATION 2020 O0005) 252.232-7010, LEVIES ON CONTRACT PAYMENTS (DEC 2006) 252.244-7000, SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) 252.247-7023, TRANSPORTATION OF SUPPLIES BY SEA (FEB 2019) The following additional contract requirement(s) or terms and conditions apply (full text of all FAR/DFARS clauses that contain fill-in information, as well as all local clauses, can be found in the attached Provisions and Clauses Full-Text document): � FAR/DFARS Clauses: *52.204-7, SYSTEM FOR AWARD MANAGEMENT (OCT 2018) 52.204-13, SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018) *52.204-16, COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2015) 52.204-18, COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2015) 52.232-40, PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013) 252.203-7000, REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP 2011) 252.204-7000, DISCLOSURE OF INFORMATION (OCT 2016) 252.204-7012, SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) 252.225-7048, EXPORT-CONTROLLED ITEMS (JUN 2013) 252.232-7003, ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING (JUN 2012) FAR/DFARS FILL-IN/FULL TEXT CLAUSES: *52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (OCT 2020) *52.204-26, COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION (OCT 2020) *52.252-1, PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) 52.252-2, CLAUSES INCORPORATED BY REFERENCE (FEB 1998) 252.211-7003, ITEM IDENTIFICATION AND VALUATION (JUN 2013) 252.232-7006, WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) LOCAL CLAUSES: ACC - APG POINT OF CONTACT TECHNICAL POINT OF CONTACT TYPE OF CONTRACT GOV INSPECTION AND ACCEPTANCE PAYMENT OFFICE (BANKCARD) TAX EXEMPTION CERT. (ARL) PAYMENT INSTRUCTIONS RECEIVING ROOM � APG *EXCEPTIONS IN PROPOSAL *AWARD OF CONTRACT *ADELPHI CONTR. DIVISION URL *FOREIGN NATIONALS PERFORMING *PAYMENT TERMS This acquisition is rated under the Defense Priorities and Allocations System (DPAS) as: N/A � The following notes apply to this announcement:� N/A Place of Performance: US Army Research Laboratory, Logistics Warehouse, Building 321, 6375 Johnson Road Aberdeen Proving Ground, MD 21005.
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/2957ba7f3c81446f835b5cdd78dd1775/view)
Place of Performance: Address: Aberdeen Proving Ground, MD 21005, USA; Zip Code: 21005; Country: USA
Record: SN05936204-F 20210310/210308230121 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

66 -- SMALL BUSINESS SET-ASIDE FOR An atomic force microscope capable of providing images in the following modes: non-contact, contact, lateral force microscopy, force modulation, force spectroscopy and lithography.