SOLICITATION NOTICE
48 -- 1 NSN LTC 4820011203713
- Notice Date
- 3/9/2021 9:45:47 AM
- Notice Type
- Presolicitation
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX21R0076
- Response Due
- 4/27/2021 12:00:00 PM
- Archive Date
- 05/12/2021
- Point of Contact
- Andrea Cline, Phone: 6146927512
- E-Mail Address
-
andrea.cline@dla.mil
(andrea.cline@dla.mil)
- Description
- 1.� ACTION CODE:� (X) P = Presolicitation�� (� ) M = Modification to a Previous Presolicitation Notice 2.� CLASSIFICATION CODE: �- 4820 � Non-powered Valves 3.� NAICS CODE: 332911 4.� TITLE:� 1 NSN LTC 5.� RESPONSE DATE:����� 04/27/2021 6.� PRIMARY POINT OF CONTACT:��������� Andrea Cline 7. SOLICITATION NUMBER:������� SPE7MX-21-R-0076 8. ITEM DESCRIPTION: 1 NSN LTC 9.� NSN:� 4820-01-120-3713 One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. Based upon market research, the Government is using the policies contained in Part 15, Contracting by Negotiation.� Interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement.� The Contracting Officer may utilize on-line Reverse Auctioning as a means of conducting price discussions under this solicitation. During the course of the on-line auction, offerors' proposed prices will be publicly disclosed to other offerors and anyone else having access to the on-line auction. This public disclosure is anonymous, meaning that each offeror's identity will be concealed from other offerors (although it will be known to the Government), and only generic identifiers will be used publicly for each offeror's proposed pricing (e.g., ""Offeror A""). By submitting a proposal in response to the solicitation, offerors agree to participate in the Reverse Auction and that their prices may be publicly disclosed, including to other offerors, during the Reverse Auction. An offeror's final auction price will be considered its final proposal revision. No price revisions will be accepted after the close of the Reverse Auction, unless the Contracting Officer decides that further discussions are needed and final proposal revisions are again requested in accordance with FAR 15.307. The solicitation will be available in DLA DIBBS on or about its issue date of �23 March 2021.� ��The website is https://www.dibbs.bsm.dla.mil/rfp. The Small Business Size Standard is 750 employees for �NAICS 332911 Items are currently code and Part number items, with the only current approved source of CAGE (09990) Parker Hannifin� CLIN 0001 � (09990) P/N 2-2686-3 The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.� The total duration (base plus option years) shall not exceed five years.� While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. TYPE OF SET-ASIDE:� UNRESTRICTED � � � � � � � CLIN 0001 NSN 4820-01-120-3713 VALVE, SAFETY RELIEF. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN FAR CLAUSE 52.246-11 APPLIES.� THE CONTRACTOR SHALL BE IN COMPLIANCE WITH THE FULL REQUIREMENTS OF THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9001 STANDARD AT THE TIME OF CONTRACT ACCEPTANCE OR CONTRACT MODIFICATION DATE. 1.� The minimum Higher Level Contract Quality Requirements for manufacturers for DLA ISO 9001:2015.� MIL-I-45208 and MIL-Q-9858 are obsolete and no longer acceptable when higher level quality is required. 2.� Higher-Level Contract Quality Requirement for Non-Manufacturers. �If a non-manufacturer is supplying the material, the non-manufacturer shall: (i) Furnish items produced at a manufacturing facility conforming to the higher-level contract quality requirement for manufacturers as specified in paragraph 1; and (ii)� Maintain and provide documented evidence that material furnished under this contract was produced at a manufacturing facility conforming to the specified higher-level contract quality requirement and that the material meets all requirements.� At a minimum, the documented evidence shall be sufficient to establish the identity of the product and its manufacturing source; and include the basic item description, the item(s) part number and/or national stock number, the item(s) manufacturing source , the manufacturing source#s commercial and government entity code (e.g. CAGE code), and clear identification of the name and location of supply chain intermediaries from the manufacturer to the direct source of the product for the offeror/contractor, to the item(s) acceptance by the Government.� It should also include, where available, the manufacturer's batch identification for the part(s), such as date codes, lot codes, or serial numbers. (iii) Maintain documentation of the Non-Manufacturers# quality assurance program; receiving/verification processes; records management system; procurement system; inventory control system; testing results; and any other records associated with the material being provided. (End of TQ Requirement) I/A/W U.S. ARMY (19207) DRAWING NUMBER 12288478. APPROVED SOURCE: PARKER HANNIFIN (09990) P/N 2-2686-3 REV B1 EXCEPTION TO SOURCE CONTROL DRAWING: THE ARMY DWG CALLS OUT REV B1 FOR PARKER HANNIFIN DWG 2-2686-3. THE CURRENT REV FOR DWG 2-2686-3 IS REV F. NOTE:� THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED.� EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING.� OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. CRITICAL APPLICATION ITEM PARKER-HANNIFIN CORPORATION 09990 P/N 2-2686-3 IAW BASIC DRAWING NR 19207 12288478 REVISION NR P�� DTD 03/20/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344343 REVISION NR N�� DTD 06/30/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12288478 REVISION NR���� DTD 02/11/2021 PART PIECE NUMBER: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001� PRES MTHD:31� CLNG/DRY:1� PRESV MAT:00 WRAP MAT:CA� CUSH/DUNN MAT:00� CUSH/DUNN THKNESS:0 UNIT CONT:00� OPI:O INTRMDTE CONT:E5� INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING �REQUIREMENTS FOR PROCUREMENT
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/cc368274a907402ea0a9a4e13f878e89/view)
- Record
- SN05937456-F 20210311/210309230109 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |