SOLICITATION NOTICE
70 -- 7E--Pivot Cases
- Notice Date
- 3/15/2021 1:07:41 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334118
— Computer Terminal and Other Computer Peripheral Equipment Manufacturing
- Contracting Office
- NAVSUP FLT LOG CTR JACKSONVILLE JACKSONVILLE FL 32212-0097 USA
- ZIP Code
- 32212-0097
- Solicitation Number
- N6883621Q0104
- Response Due
- 3/22/2021 8:00:00 AM
- Archive Date
- 09/18/2021
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is N6883621Q0104 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 334118 with a small business size standard of 1,000.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit quotes. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-03-22 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Special Shipping Instructions. The FLC - Jacksonville requires the following items, Brand Name or Equal, to the following: LI 001: Brand Name or equal (product PIVOT) per FAR 52.211- 6: Cases for iPad Mini 5. � Stainless steel pin connector for clip � Open port and button access for headphones and charging cables � All polycarbonate top plate. No silicone trim for the screen edge � Precision gesturing out to the screen edge and no long-term issue with cracking silicone seen in previous generations � Crease in the hinge to reduce bounce in Horizontal Folio Viewing Mode � Mic location � ID window on back panel � Rubber Feet on back panel Folio Features: � Molded plastic folio cover � Inner-cover ridges inside screen concave to prevent sliding and shifting � Soft, flexible rubber combined with rigid inner polycarbonate shell and hinge support �Quoter shall provide the country of origin for the item in this CLIN�, 1054, EA; LI 002: Brand Name or equal (product PIVOT) per FAR 52.211-6: Utility light mount [used with iPad Mini 5 case (CLIN 0001)]. � Multi-joint arm � Classified as �portable part� by FAA (AC120-76D) and EASA (AMC 20-25) � Can be pilot carried �Quoter shall provide the country of origin for the item in this CLIN�, 938, EA; LI 003: Brand Name or equal (product PIVOT) per FAR 52.211-6: Mount combo kit [used for iPad Mini 5 case (CLIN 0001)]. Includes Suction Cup, Mounting Plate, and Mounting Hardware Kit (Parts Kit) � Suction Cup Mount: Dual mode suction cup � Mounting Plate: Features locking slots for corresponding clip with Thermoplastic polyurethane (TPU) disc � Dogbone: For use with Mounting Plate � Tension Ring �Quoter shall provide the country of origin for the item in this CLIN�, 120, EA; LI 004: Brand Name or equal (product PIVOT) per FAR 52.211-6: Ejection Seat Leg strap for iPad Mini 5 case (CLIN 0001) designed for use in extreme conditions to meet ejection seat considerations up to 450 KEAS � Universal single direction mounting plate constructed of aircraft grade aluminum � Custom fit nylon straps with reinforced stitching and 1.5 inch GT Cobra Buckles � Removable Sun shade � Removable 15-degree wedge accessory �Quoter shall provide the country of origin for the item in this CLIN�, 623, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, FLC - Jacksonville intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing quotes, which descend in price during the specified period of time for the aforementioned reverse auction. FLC - Jacksonville is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time quotes. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their quote using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a quote on www.UnisonMarketplace.com. Offerors that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith quotes, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, using Simplified Acquisition Procedures found at FAR 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is N6883620Q0346 and this solicitation issued as a request for quote (RFQ). The solicitation document, incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-09. The small business standard for the associated NAICS code is 334118 with a size standard of 1,000. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. No partial shipments are permitted unless specifically authorized at the time of award. Bid MUST be good for 30 calendar days after close of Buy. The Offeror must be actively registered in the NAICS code of 334118 at the time of closing to be considered for award of any resulting contract. Failure to be properly registered at the time and date of closing will render the quote non-responsive. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein in full text (see attachment): SUPTXT243-9400(1-92) Authorized Changes Only By The Contracting Officer; 52.212-2 Evaluation -- Commercial Items; 52.212-3 Offeror Representations and Certifications -- Commercial Items (Alt I); 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders�Commercial Items; 52.222-19 Child Labor�Cooperation with Authorities and Remedies (Dev 2020-O0019); 52.252-1 Solicitation Provisions Incorporated by Reference; 52.252-2 Clauses Incorporated by Reference; 52.252-5 Authorized Deviations In Provisions; 52.252-6 Authorized Deviations In Clauses; 252.211-7003 Item Unique Identification and Valuation; 252.232-7006 Wide Area Workflow Payment Instructions This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be ""ACTIVE"" at the time of award The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: 52.203-12 Limitation on Payments to Influence Certain Federal Transactions; 52.204-7 System For Award Management; 52.204-13 System For Award Management Maintenance; 52.204-16 Commercial and Government Entity Code Reporting; 52.204-18 Commercial and Government Entity Code Maintenance; 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment; 52.212-1 Instructions to Offerors - Commercial Items; 52.212-4 Contract Terms And Conditions -- Commercial Items; 52.219- 6, Notice of Total Small Business Set-Aside (DEVIATION 2020-O0008); 52.219-6, Notice of Total Small Business Set-Aside (DEVIATION 2020-O0008) Alt I; 52.232-40 Providing Accelerated Payments to Small Business Subcontractors; 252.203-7000 Requirements Relating to Compensation of Former DoD Officials; 252.203-7005 Representation Relating To Compensation Of Former DoD Officials; 252.204-7003 Control Of Government Personnel Work Product; 252.204-7015 Disclosure Of Information To Litigation Support Contractors; 252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services � Representation; 252.204- 7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services; 252.223-7008 Prohibition of Hexavalent Chromium; 252.225-7012 Preference for Certain Domestic Commodities; 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports; 252.232-7010 Levies On Contract Payments; 252.244-7000 Subcontracts For Commercial Items And Commercial Components (DoD Contracts); 252.247-7023 Transportation Of Supplies By Sea.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/499aacdb33054c1baf3794aa22ed68dd/view)
- Place of Performance
- Address: Special Shipping Instructions.
- Record
- SN05943178-F 20210317/210315230109 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |