SOLICITATION NOTICE
78 -- GYM EQUIPMENT
- Notice Date
- 3/17/2021 1:50:56 PM
- Notice Type
- Presolicitation
- NAICS
- 713940
— Fitness and Recreational Sports Centers
- Contracting Office
- 262-NETWORK CONTRACT OFFICE 22L (36C262) LONG BEACH CA 90815 USA
- ZIP Code
- 90815
- Solicitation Number
- 36C26221Q0484
- Response Due
- 3/25/2021 11:00:00 AM
- Archive Date
- 05/24/2021
- Point of Contact
- John.harrison2@va.gov, John Harrison, Phone: 562-766-2267
- E-Mail Address
-
john.harrison2@va.gov
(john.harrison2@va.gov)
- Awardee
- null
- Description
- REQUEST FOR INFORMATION: 36C262-21-Q-0484 GYM EQUIPMENT. THIS REQUEST FOR INFORMATION (RFI) IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). This is not a solicitation announcement. This is sources sought synopsis only for market research purposes ONLY. The purpose of this synopsis is to gain knowledge of potential qualified Service-Disabled Veteran Owned Small Businesses (SDVOSB) or Veteran Owned Small Businesses (VOSB) for relative to NACIS 713940 sources (size standard of 8.0 Million). Responses to this synopsis will be used by the Government to make appropriate acquisition decisions. After review of the responses to this source sought synopsis, a solicitation announcement may be published in the FedBizOpps or GSA eBuy websites. Responses to the sources sought synopsis are not considered adequate responses to the solicitation announcement. All interested offerors will have to respond to the solicitation announcement in addition to responding to this source sought announcement. The Department of Veterans Affairs, Network 22 Contracts Office, is seeking sources to provide Trashcan Liners for the VA Greater Los Angeles Healthcare System. If you are interested and can provide the required supplies, please provide the requested information as indicated below. Responses to this notice should include your company name, DUNS Number, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified under this RFI? (3) Are you the manufacturer or distributor of the items being referenced above (or equivalent product/solution)? What is the manufacturing country of origin of these items? (4) If you re a small business and you are an authorized distributor/reseller for the items identified above (or equivalent product/solution), do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (5) Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract type and number. (6) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions available on your schedule/contract? (7) Please provide general pricing for your products/solutions for market research purposes. (8) Please submit your capabilities regarding the salient characteristics being provided and any information pertaining to brand name or equal to items to establish capabilities for planning purposes? Responses to this notice shall be submitted via email to John.harrison2@va.gov Telephone responses shall not be accepted. Responses must be received no later than Thursday, March 25, 2021 at 11:00 AM PST. If a solicitation is issued it shall be announced later, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation. Please provide unofficial pricing. Notice: No remanufactures or gray market items/ supplies will not be acceptable. Interested parties of RFI must be an authorized reseller, distributor, or dealer of the O.E.M. (Original Equipment Manufacturer). Verification can be provided by an authorization letter or other documents from the OEM. Equipment shall be in accordance with the OEM terms and conditions. Salient Characteristics Salient Specifications- updated 3.5.21 Recumbent Elliptical Requires wt. capacity of 350 lbs. Requires various settings and options for length/intensity of workout Requires adjustable seat, and proper positioning with handles and foot straps for adjustability to individuals. Requires visual display of time, steps, calories, METs, HR, watts Requires various resistance levels of up to 200 Dumbbells Individual Neoprene Dumbbells Set, 1-10lb in pairs and uniformly, increasing weight increments. All weights must be made of cast iron or steel and latex free, vinyl coated to protect flooring. Ankle Weights- set of 32 Requires Velcro strap to fit ankle, wrist and thigh and secure comfortably Requires double stitching and heavy-duty material for commercial use Must be color coded for easy identification of weight Requires grommets to allow for storage Recumbent Bike Recumbent Bike with Premium Seat Requires no less than 450 lb. user capacity Requires 360 deg swivel seat. Requires minimal display status: Display Feedback Time, total steps, steps per minute, stride length, calories, ascent, MET's, watts, heart rate and level. Requires Resistance Levels minimum: 1-20 levels adjustable in .1 increments providing 200 levels of resistance. Requires user programs: Quick Start, Manual, 7 Hill Profiles, Fit-Quick, Stress Test, Heart Fit Test, Heart Fit Training, Constant Work, Iso-Strength (constant RPM), Power Fit Test, Power Fit Training, Random Exercise ergonomic system with Premium Seat Exercise ergonometer system with easily removable seat Requires seat features forward/back and up/down adjustments, plus recline up to 23º and 360º swivel. Requires removable seat, facilitating wheelchair user access Requires step-through access to allow users to enter the machine without lifting their leg up and over a center console. Requires minimal display status: Display Feedback Time, total steps, steps per minute, stride length, calories, ascent, MET's, watts, heart rate and level. Requires Resistance Levels minimum: 1-20 levels adjustable in .1 increments providing 200 levels of resistance. Requires user programs: Quick Start, Manual, 7 Hill Profiles, Fit-Quick, Stress Test, Heart Fit Test, Heart Fit Training, Constant Work, Iso-Strength (constant RPM), Power Fit Test, Power Fit Training, Random Plyometric Rebounder Requires durable frame from welded steel and powder coated. Requires commercial-grade woven trampoline fabric. Requires angle adjustability. Must measure 31 H x 40 W x 45 L Requires standing handle for support and balance 3 Section Table- Imperial blue Requires gas struts for angle adjustability Requires wt. capacity of 550 lbs Requires retractable plugs and casters to prevent falls and tripping Must measure 78 L x 28W x 38 H Must have surround high/low bar to easily raise/lower table to prevent injury. 5 section Table- Imperial Blue Requires gas struts for angle adjustability. Requires wt. capacity of 550 lbs Requires retractable plugs and casters to prevent falls and tripping Must measure 78 L x 28W x 38 H. Must have surround high/low bar to easily raise/lower table to prevent injury. Requires adjustable armrests, drop down shoulders, and motorized mid-section to allow for various treatment positions. Bariatric Hi-Lo Mat Platform 6 x 8 Imperial blue Requires height adjustability from 18 - 38 . Requires capability to lift 500 lbs; and hold up to 1000 lbs. Bariatric Bar Activated Table Requires wt. capacity of 500 lbs. Must measure 34 W x 76 L x 18 - 37 H Requires height adjustability of 18-37 . Requires surround bar for adjusting table Chattanooga TX Traction Package- Imperial Blue Requires height adjustable from 13-20 . Must have clevis attachment. Required 4 section adjustment table. Must have touch screen, timer, and set protocols. Therapy System- 4 Channel Combo No EMG Requires 4 channels and no EMG. Requires clear interface and smart software for user-friendliness. Requires various treatment modality options and customizable parameters. Requires ultrasound and electrical stimulation capabilities. Kore Balance 19/22 Requires large 19 -22 touch screen. Requires a variety of games to customize individual treatment plans. Must have low step up height for easy access. Requires safety rails and attachments for safety belts or attachment bands. Must be 44 x 58 to maximize space usage in the clinic. True Stretch Requires exercise placard for visual cues to pt. Requires grip base to prevent slipping 2-sided staircase Required wt. capacity of at least 350 lbs. Requires access on 2 sides. Requires safety handrails on 2 sides. Requires safety treads at each level. Requires different step heights (4 and 6 ) for variable practice Pilates Reformer- studio bundle Must include various accessories for customization: mat converter, jump board, rotational disk board, arc barrel, box/foot strap, padded platform extender and maple pole Requires higher carriage height of 22.5 for easy access Hydrocollator Heating Unit Must be stainless steel for easy wipe down. Must have wheels for ease of relocating/draining Required to hold at least 24 hot packs. Must be no larger than 35 D x 20 W x 33 H Storage Rack Must be wall mounted. Required to store up to 12 forms of assistive devices to prevent trip hazards. Must hold up to 30# per hook. Bariatric Motorized Height and Width Parallel Bars- Pearl Gray 12 Must be at least 12 feet. Must have motorized height/width adjustments from 25.5 to 39.75 in height and 21.5 to 30.5 in width. Requires 6.8A, 115V, 782W, hospital grade plug. Requires 1000 lb. wt. capacity. Requires no skid mats. Handrails must be 1-5/8 Standard Weight Dumbbell set (20 pcs) with floor rack Dumbbells, 1-10lb in pairs and uniformly, increasing weight increments. All weights must be made of cast iron or steel and latex free, vinyl coated to protect flooring. Must come with rack for storage Upright Bike Upright stationary Bike. Requires no less than 350 lb. user capacity. Requires Resistance Levels minimum: 1-20 levels adjustable in .1 increments providing 200 levels of resistance. Requires user programs: Quick Start, Manual, Hill Profiles, Random Profiles, Heart Rate, Iso-Strength, Constant Work, Heart-Fit Test, Heart-Fit Training, Power-Fit Test, Power-Fit Training, Stress Test and Fit-Quick. Requires Self-generating power and optional 12V adapter. Required equivalency SCIFIT model ISO1000 Upright Bike Combo Mirror- Ankle/Wrist Weight-Band and dumbbell Rack Must be able to hold various pieces of rehab accessories. Must be mobile with swivel casters for ease of movement. Must hold up to 32 weights, 22 dumbbells, and 6 rolls of bands. Must have mirror side. 3Tier Kettlebell Rack with KB Must store at least 6 kettlebells various from 5-50 lbs. Kettlebells must be rubber coated for floor protection. Handles must be reinforced for durability. Treadmill Electric Electric heavy-duty gym treadmill. Requires 550lb user weight capacity. Requires handrail switches for easy adjustment of speed and elevation. Requires slow starting speed to ensure safety and makes it easy to make changes to the workout. Requires walking surface no less than 22"" x 62 and no larger than 24 x 64 . Required operating range: 0.1-12mph; 0% - 15% electronic elevation in .5 increments of adjustment Skeleton Model Must display anatomical structures and some deformities, muscle attachments for educational purposes. Must be on wheels for easy maneuverability. Appendages must be removable Joints must be flexible Shoulder joint model Must be flexible and with removable parts for educational purposes Knee model Must be flexible and with removable parts for educational purposes Bosu ball Required nonskid and non-marking base. Must have pump Tumble Forms 18 x 3 x 4 Must have flat bottom and curved top. Required to have surfaces that are easy to clean and sanitize. Latex free Yellow 18 exercise Ball Up to 600 lbs of static weight. Must be easily wiped down for sanitation Red 21 exercise ball Up to 600 lbs of static weight. Must be easily wiped down for sanitation Green 26 EXERCISE BALL Up to 600 lbs of static weight. Must be easily wiped down for sanitation Blue 28 exercise ball Up to 600 lbs of static weight. Must be easily wiped down for sanitation Balance pad elite Must be non-slip, must be water resistant. Must be no bigger or smaller than 20 x 16 x 2.5 Soft weights Must be 1.5 in diameter. Material must easily be wiped down. Must range from 1.1-6.6 lbs. Stability trainers- soft pair Surface must be anti-slip. Material must be easily wiped down. Must have 2 surfaces for various sensorimotor inputs Economy Hot pack storage Rack x 2 Required ability to mount to wall. Must be stainless steel. Must have at least 6 hooks for storage Balance Pad Standard Must have smooth surface. Must be non-slip. Must be water resistant. Must be no bigger or smaller than 20 x 16 x 2.5 Wall rack for therapy bars Must be heavy duty and wall mounted. Must hold 8 bars. Slots must be angled for secure hold 3# weighted bar Must be easy to clean. Must be 36 L 6# weighted bar Must be easy to clean. Must be 48 L 7# weighted bar Must be easy to clean. Must be 48 L 8# weighted bar Must be easy to clean. Must be 48 L Suspension Kit Body weight-based, performance training tool used with TRX suspension system rack Required to support up to 1000 lbs user weight. Easy set up. Required kit weight less than 4 lbs Required equivalency TRX Suspension Trainer Pro Kit 4# weighted bar Must be 36 L. Must be easy to clean 5# weighted bar Must be easy to clean. Must be 42 L 10# weighted bar Must be easy to clean. Must be 54 L Spine model Model1. Must be able to place on floor or table (with stand). Must be flexible and display various spinal deficits, nerve exits, etc. for educational purposes. Swiss Ball wall mount racks Required to hold at least 3 balls. Required to be wall mounted. 58 L x 17 W x 3 H
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/0906cbf0c06b41c884a3bb74e72e65a6/view)
- Place of Performance
- Address: VA San Diego Healthcare System 1330 30th St. Ste. G San Diego, CA 92154 warehouse hours are Mon-Fri 8am – 4:30pm.
- Record
- SN05945942-F 20210319/210317230115 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |