SOURCES SOUGHT
16 -- B52 Nose Cowl Fod Removal Fixture
- Notice Date
- 3/29/2021 8:14:19 PM
- Notice Type
- Sources Sought
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- FA8125 AFSC PZIMA TINKER AFB OK 73145-3303 USA
- ZIP Code
- 73145-3303
- Solicitation Number
- FA8125A21019
- Response Due
- 4/28/2021 8:00:00 AM
- Archive Date
- 05/13/2021
- Point of Contact
- Shelli Simmons, Phone: Phone intermittent, please email.
- E-Mail Address
-
shelli.simmons@us.af.mil
(shelli.simmons@us.af.mil)
- Description
- The Government is conducting market research to identify potential sources that possess the production data, capabilities, and experience to meet qualification requirements for the production of the B-52 Engine Nose Cowl FOD Removal Fixture. Fabricate two (2) ""B-52 Engine Nose Cowl FOD Removal Fixture"" per drawing X201961718. � The first article shall be made as a prototype. � The second article shall be fabricated only after Engineering has validated and verified (val/ver) the first article and made any necessary changes to the design of the fixture. � The second article shall be fabricated only after Engineering has validated and verified (val/ver) the first article and made any necessary changes to the design of the fixture. An updated drawing will be furnished to the contractor if changes are made. � The second article shall be delivered no more than sixty (60) days after Engineering has val/ver the first. Engineering shall val/ver the first article within thirty (30) days after delivery. � Deliver fully assembled or the contractor shall fully assemble the fixtures upon delivery on-site. � All substitutions or deviations from drawing must be approved by Technical POC (Engineering). � Delivery shall be directly to Building 2121, addressed to the 565th AMXS Tool Crib. � Contractor must have access to all standards or specifications referenced in the drawing X201961718. � For the purposes of the correction of fabrication errors and/or discussion of design changes, the contractor shall be available for no more than three (3) on-site visits of one business day or less. � Any operations manuals, technical information, instruction guidance, etc. included with Consumer Off-The-Shelf (COTS) items on the fixtures shall be furnished by the contractor to Engineering � All welders must be AWS Certified Welders (CW) with at least 5 years� experience. Parts which include Geometric Dimensions and Tolerance (GD&T / GDT) must be fabricated by personnel who have received formal GD&T training with experience machining GD&T parts. � Components which re-quire electrical wiring must be inspected by a licensed electrician. Contractor must have access to all standards or specifications referenced in the drawing X201961718.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/c5472932187e487ca235cf8c006bc2df/view)
- Place of Performance
- Address: Tinker AFB, OK 73145, USA
- Zip Code: 73145
- Country: USA
- Zip Code: 73145
- Record
- SN05956189-F 20210331/210331081153 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |