SOURCES SOUGHT
12 -- Post, Aming
- Notice Date
- 4/2/2021 12:18:33 PM
- Notice Type
- Sources Sought
- NAICS
- 336390
— Other Motor Vehicle Parts Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M221R0015SSamendment
- Response Due
- 4/12/2012 3:00:00 PM
- Archive Date
- 04/27/2012
- Point of Contact
- Elizabeth Beechey, Phone: 6146927996
- E-Mail Address
-
ELIZABETH.BEECHEY@DLA.MIL
(ELIZABETH.BEECHEY@DLA.MIL)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Sources sought is amended to change the return date to 4/12/21 Description is below:� PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:016408931 � � �POST,AIMING � � �REFERENCE NUMBER:RP001 � � �REFERENCE NUMBER:RQ032 � � �REFERENCE NUMBER:RD002 � � �REFERENCE NUMBER:RA001 � � �REFERENCE NUMBER:RQ011 � � �REFERENCE NUMBER:CA070 � � �REFERENCE NUMBER:RQ009 � � �REFERENCE NUMBER:ZD054 � � �REFERENCE NUMBER:ZDISO � � �IAW BASIC DRAWING NR 19200 13028470 � � �REVISION NR B � DTD 08/13/2018 � � �PART PIECE NUMBER: 13028470-2 � � �IAW REFERENCE DRAWING NR 19207 12579607 � � �REVISION NR C � DTD 08/04/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028468 � � �REVISION NR B � DTD 08/13/2018 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028469 � � �REVISION NR A � DTD 08/12/2014 � � �PART PIECE NUMBER: � � �IAW REFERENCE QAP 19200 13028469 � � �REVISION NR � � DTD 03/06/2014 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028470 � � �REVISION NR B � DTD 04/07/2020 � � �PART PIECE NUMBER: � � �IAW REFERENCE QAP 19200 13028470 � � �REVISION NR B � DTD 03/06/2014 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028471 � � �REVISION NR � � DTD 08/07/2013 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028472 � � �REVISION NR � � DTD 08/07/2013 � � �PART PIECE NUMBER: � � �IAW REFERENCE QAP 19200 13028472 � � �REVISION NR � � DTD 03/06/2014 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028468 � � �REVISION NR A � DTD 06/28/2018 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028470 � � �REVISION NR A � DTD 06/28/2018 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028470 � � �REVISION NR A � DTD 06/28/2018 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028470-2 � � �REVISION NR A � DTD 08/12/2014 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028470 � � �REVISION NR � � DTD 04/06/2020 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13028470 � � �REVISION NR � � DTD 04/06/2020 � � �PART PIECE NUMBER: � � �PREP FOR DELIVERY � � �LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS � � �PKGING DATA-QUP:001 � � �WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951. ************************************************************************************************************ � � � � � � � � � � � � � � � � � � � � � � � � � � GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: � � �All DLA Master List of Technical and Quality Requirements take � � � precedence over ASTM D3951. � � �Mark and label all packaging and packing in accordance with MIL-STD-129. � � �The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be � � � as specified in the contract/purchase order. � � �PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING � � � REQUIREMENTS FOR PROCUREMENT ITEM DESCRIPTION TEXT � � �REFERENCE NUMBER RP001 � � �RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT � � �REFERENCE NUMBER RQ032 � � �RQ032: EXPORT CONTROL OF TECHNICAL DATA � � �This item has technical data some or all of which is subject to � � �export-control of either the International Traffic in Arms regulations � � �(ITAR) or the Export Administration Regulations (EAR), and cannot be � � �exported without prior authorization from either the Department of State � � �or the Department of Commerce. Export includes disclosure of technical � � �data to foreign persons and nationals whether located in the United � � �States or abroad. This requirement applies equally to foreign national � � �employees and U.S. companies and their foreign subsidiaries. DFARS � � �252.225-7048 is applicable to this data. � � �The Defense Logistics Agency (DLA) limits distribution of export-control � � �technical data to DLA contractors that have an approved US/Canada Joint � � �Certification Program (JCP) certification, have completed the � � �Introduction to Proper Handling of DOD Export-Controlled Technical Data � � �Training and the DLA Export-Controlled Technical Data Questionnaire � � �(both are available at the web address given below), and have been � � �approved by the DLA controlling authority to access the � � �export-controlled data. Instructions for obtaining access to the � � �export-controlled data can be found at: � � �https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ � � �To be eligible for award, offerors and any sources of supply proposed � � �for use are required to have an approved JCP certification and have � � �been approved by the DLA controlling authority to access � � �export-controlled data managed by DLA. DLA will not delay award in � � �order for an offeror or its supplier to apply for and receive approval � � �by the DLA controlling authority to access the export-controlled data. � � �REFERENCE NUMBER RD002 � � �RD002, COVERED DEFENSE INFORMATION APPLIES � � �REFERENCE NUMBER RA001 � � �RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. � � �REFERENCE NUMBER RQ011 � � �RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES � � �REFERENCE NUMBER CA070 � � �FULL AND OPEN COMPETITION APPLY � � �REFERENCE NUMBER RQ009 � � �RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN � � �REFERENCE NUMBER ZD054 � � �CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED, � � �UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION. � � �REFERENCE NUMBER ZDISO � � �FAR CLAUSE 52.246-11 APPLIES. �THE CONTRACTOR SHALL BE IN COMPLIANCE � � �WITH THE FULL REQUIREMENTS OF THE INTERNATIONAL ORGANIZATION FOR � � �STANDARDIZATION (ISO) 9001 STANDARD AT THE TIME OF CONTRACT ACCEPTANCE � � �OR CONTRACT MODIFICATION DATE. � � �1. �The minimum Higher Level Contract Quality Requirements for � � �manufacturers for DLA ISO 9001:2015. �MIL-I-45208 and MIL-Q-9858 are � � �obsolete and no longer acceptable when higher level quality is required. � � �2. �Higher-Level Contract Quality Requirement for Non-Manufacturers. �If � � �a non-manufacturer is supplying the material, the non-manufacturer � � �shall: � � �(i) Furnish items produced at a manufacturing facility conforming to the � � �higher-level contract quality requirement for manufacturers as specified � � �in paragraph 1; and � � �(ii) �Maintain and provide documented evidence that material furnished � � �under this contract was produced at a manufacturing facility conforming � � �to the specified higher-level contract quality requirement and that the � � �material meets all requirements. �At a minimum, the documented evidence � � �shall be sufficient to establish the identity of the product and its � � �manufacturing source; and include the basic item description, the � � �item(s) part number and/or national stock number, the item(s) � � �manufacturing source , the manufacturing source#s commercial and � � �government entity code (e.g. CAGE code), and clear identification of the � � �name and location of supply chain intermediaries from the manufacturer � � �to the direct source of the product for the offeror/contractor, to the � � �item(s) acceptance by the Government. �It should also include, where � � �available, the manufacturer's batch identification for the part(s), such � � �as date codes, lot codes, or serial numbers. � � �(iii) Maintain documentation of the Non-Manufacturers# quality assurance � � �program; receiving/verification processes; records management system; � � �procurement system; inventory control system; testing results; and any � � �other records associated with the material being provided. � � �(End of TQ Requirement)
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/726f3ad912a942de834586004b7b6916/view)
- Record
- SN05961760-F 20210404/210402230125 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |