SAMDaily.us | PRESOL | 71 | Cubicle Furniture

SAMDAILY.US - ISSUE OF APRIL 07, 2021 SAM #7067
SOLICITATION NOTICE

71 -- Cubicle Furniture

Notice Date: 4/5/2021 8:51:58 AM
Notice Type: Solicitation
NAICS: 337127 — Institutional Furniture Manufacturing
Contracting Office: DLA MARITIME - NORFOLK PORTSMOUTH VA 23709-5000 USA
ZIP Code: 23709-5000
Solicitation Number: SPMYM121Q0043
Response Due: 4/14/2021 3:00:00 AM
Archive Date: 04/29/2021
Point of Contact: Craig Harmon, Phone: 7572785055
E-Mail Address: craig.harmon@dla.mil
(craig.harmon@dla.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 337127 Institutional Furniture Manufacturing. This requirement will be set aside as a 100% Small Business concern. The Contract Line Items (CLINs) are as follows. N4215810285080 LAMINATES GRD L1 STANDARD LAMINATES ITEM#HTLHP96 THE HON COMPANY 1 Each FOB: Destination N4215810285081 SWIVEL TILT ARMS PILLOWSOFT 2090 MGR MID-BACK SWIVEL TILT ARMS CASTER: HARD (STANDARD) GR 1 UPH ITEM#H2092 THE HON COMPANY 8 Each FOB: Destination N4215810285082 RECTANGULAR TOP PRESIDE 96W X 48D RECT SHAPED LAMINATE TOP 2MM/FLAT ITEM#HTCL4896 THE HON COMPANY 1 Each FOB: Destination N4215810285084 HARNESS ELECTRICAL POWER HARNESS 48W 3-1 & 2-2 SYSTEMS ITEM#HH8711248 THE HON COMPANY 1 Each FOB: Destination N4215810285085 CABLE BASE BASE IN FEED CABLE BASE 3-1 & 2-2 SYSTEMS ITEM#HH879072 THE HON COMPANY 7 Each FOB: Destination N4215810285083 HARNESS ELECTRICAL POWER HARNESS 36W 3-1 & 2-2 SYSTEMS ITEM#HH871236 THE HON COMPANY 21 Each FOB: Destination N4215810285086 TASKLIGHT TASKLIGHT 42W ITEM#HH870942 THE HON COMPANY 12 Each FOB: Destination N4215810285087 RECEPTACLE DUPLEX RECEPTACLE CIRCUIT 4 3-1 & 2-2 SYSTEMS ITEM#HH871504 THE HON COMPANY 24 Each FOB: Destination N4215810285088 RECEPTABLE DUPLEX RECEPTACLE CIRCUIT 1 3-1 & 2-2 SYSTEMS ITEM#HH871501 THE HON COMPANY 24 Each FOB: Destination N4215810285089 RECEPTACLE DUPLEX RECEPTACLE CIRCUIT 2 3-1 & 2-2 SYSTEMS ITEM#HH871502 THE HON COMPANY 14 Each FOB: Destination N4215810285090 RECEPTACLE DUPLEX RECEPTACLE CIRCUIT 3 3-1 SYSTEM ONLY ITEM#HH871503 THE HON COMPANY 10 Each FOB: Destination N4215810285091 CONNECTOR KIT STRAIGHT CONNECTOR KIT ITEM#HSCKTPS THE HON COMPANY 26 Each FOB: Destination N4215810285092 CANTILEVER 24D CANTILEVER ONE PAIR ITEM#HCTL242 THE HON COMPANY 24 Each FOB: Destination N4215810295093 CANTILEVER LEFT-HAND CANTILEVER 18 IN D ITEM#HCTL181L THE HON COMPANY 12 Each FOB: Destination N4215810295094 CANTILEVER RIGHT-HAND CANTILEVER 18 IN D ITEM#HCTL181R THE HON COMPANY 12 Each FOB: Destination N4215810295095 PANEL BRACKET VOI O-LEG TO PANEL BRACKET LEFT (QTY 1) ITEM#HLSLPBL THE HON COMPANY 5 Each FOB: Destination N4215810295096 PANEL BRACKET VOI O-LEG TO PANEL BRACKET RIGHT (QTY 1) ITEM#HLSLPBR THE HON COMPANY 7 Each FOB: Destination N4215810295097 CORD COVER CORD COVER 15 INVERTICAL HEIGHT ITEM#HECC15 THE HON COMPANY 14 Each FOB: Destination N4215810295098 DOOR FRAME ACCELERATE SLIDING DOOR FRAME 36W ITEM#HESDMK36 THE HON COMPANY 7 Each FOB: Destination N4215810295099 SLIDING DOOR ABOUND SLIDING DOOR 80H X 42W ITEM#HH18042SD THE HON COMPANY 8 Each FOB: Destination N4215810295100 DOOR FRAME ACCELERATE SLIDING DOOR FRAME 36W ITEM#HESDMK36 THE HON COMPANY 1 Each FOB: Destination N4215810295101 PANEL CAP PANEL TOP CAP 36W ITEM#HETC36 THE HON COMPANY 50 Each FOB: Destination N4215810295102 PANEL CAP PANEL TOP CAP 48W ITEM#HETC48 THE HON COMPANY 7 Each FOB: Destination N4215810295103 END COVERS PANEL FINISHED END COVERS 50H ITEM#HEFEC50P THE HON COMPANY 12 Each FOB: Destination N4215810295104 CONNECTOR T CONNECTOR 80H ITEM#HEC80PT THE HON COMPANY 10 Each FOB: Destination N4215810295105 CONNECTOR KIT VARIABLE HEIGHT CONNECTOR KIT 30H ITEM#HECVH30P THE HON COMPANY 12 Each FOB: Destination N4215810295106 CONNECTOR L CONNECTOR 80H ITEM#HEC80PL THE HON COMPANY 4 Each FOB: Destination N4215810295107 END COVERS PANEL FINISHED END COVERS 80H ITEM#HEFEC80P THE HON COMPANY 12 Each FOB: Destination N4215810295108 FABRIC STACKER FABRIC STACKER 15H X 36W ITEM#HES1536F THE HON COMPANY 2 Each FOB: Destination N4215810295109 FABRIC STACKER FABRIC STACKER 15H X 48W ITEM#HES1548F THE HON COMPANY 1 Each FOB: Destination N4215810295110 FLIPPER DOOR 15H X 13D X 36W FLIPPER DOOR OVERHEAD ITEM#HEOHRTA1536FD THE HON COMPANY 24 Each FOB: Destination N4215810295111 FLIPPER DOOR 15H X 13D X 48W FLIPPER DOOR OVERHEAD ITEM#HEOHRTA1548FD THE HON COMPANY 12 Each FOB: Destination N4215810295112 O-LEG SUPPORT 24D X 28H O-LEG SUPPORT FOR WKSF (SINGLE LEG) ITEM#HLSL2428O THE HON COMPANY 24 Each FOB: Destination N4215810295113 GLASS STACKER GLASS STACKER 15H X 36W ITEM#HES1536G THE HON COMPANY 12 Each FOB: Destination N4215810295114 GLASS STACKER GLASS STACKER 15H X 48W ITEM#HES1548G THE HON COMPANY 6 Each FOB: Destination N4215810295115 BRIGADE BRIGADE PED R PULL FREESTANDING B/B/F 20D X 28H ITEM#H36720R THE HON COMPANY 24 Each FOB: Destination N4215810295116 BRIGADE BRIGADE PED R PULL FREESTANDING F/F 20 20D X 28H ITEM#H36820R THE HON COMPANY 24 Each FOB: Destination N4215810295117 GLASS STACKER CLEAR GLASS STACKER 30H X 36W ITEM#HES3036G THE HON COMPANY 24 Each FOB: Destination N4215810295118 PANEL TACKABLE PANEL W/O TC 65H X 36W ITEM#HETP6536FP THE HON COMPANY 14 Each FOB: Destination N4215810295119 PANEL TACKABLE PANEL W/O TC 65H X 48W ITEM#HETP6548FP THE HON COMPANY 7 Each FOB: Destination N4215810295120 PANEL TACKABLE PANEL W/O TC 50H X 36W ITEM#HETP5036FP THE HON COMPANY 36 Each FOB: Destination N4215810295121 SYSTEMS COVER SYSTEMS 72X36X24X24 LEFT CORNER COVE WKSFC EDGE ITEM#HWV93AALP THE HON COMPANY 12 Each FOB: Destination N4215810295122 CORNER COVE SYSTEMS 72X36X24X24RT CORNER COVE WKSFC EDGE ITEM#HWV93AARP THE HON COMPANY 12 Each FOB: Destination N4215810295123 RECTANGULAR EDGEBAND SYSTEMS RECTANGULAR WORKSURFACE EDGEBAND ITEM#HWR2448P THE HON COMPANY 12 Each FOB: Destination N4215810295124 SEAT SLIDER IGNITION 2 TASK MID-BACK ILIRA BACK ITEM#HIWMM THE HON COMPANY 24 Each FOB: Destination N4215810295125 TASKLIGHT TASKLIGHT 60W ITEM#HH870960 THE HON COMPANY 14 Each FOB: Destination N4215810295126 DESK SHELL 10500 SERIES DESK SHELL 72W X 30D X 29-1/2H ITEM#H10592 THE HON COMPANY 14 Each FOB: Destination N4215810295127 FLOORSTAND 10500 SERIES FLOORSTAND FULL HT PED B/B/F 15-5/8W ITEM#H10502 THE HON COMPANY 14 Each FOB: Destination N4215810295128 FLOORSTAND 10500 SERIES FLOORSTANDING FULL HT PED F/F 15-5/8 ITEM#H10504 THE HON COMPANY FOB: Destination 14 Each MILSTRIP: N4215810295128 N4215810295129 STORAGE 10500 SERIESSTACK ON STORAGE 72W X 14-5/8D X 37 ITEM#H10534 THE HON COMPANY 14 Each FOB: Destination N4215810295130 STRONG BACK 10500 SERIES TCKBD FOR 72W STACK ON STRG BCK ITEM#H90056 THE HON COMPANY 14 Each FOB: Destination N4215810295131 BACK ENCLOSURE 10500 SERIES BACK ENCLOSURE FOR 72W STACK ON ITEM#H105856 THE HON COMPANY 14 Each FOB: Destination N4215810295132 MID BACK ILIRA IGNITION 2 TASK MID BACK ILIRA BACK ITEM#HIWMM THE HON COMPANY 14 Each FOB: Destination This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM121Q0043 and it is expected to be posted on or about 5 April 2021 and posted in BETA SAM, https://beta.sam.gov/. Quotes will be due by 6:00 am EST on 14 April, 2021 and may be emailed to the attention of Craig Harmon at craig.harmon@dla.mil. Please make sure that the solicitation number (SPMYM121Q0043) is included in the subject line of any email correspondence.� Emails without subject lines will not be read because of security issues. Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://beta.sam.gov/ By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency. SCOPE 1.1�� The contractor shall procure and install office furniture in the Code 740 office in building 268 within Norfolk Naval Shipyard (NNSY), Portsmouth, VA 23709. This work includes all material, equipment, labor, and trades and skills. 2.�� ATTACHMENTS 2.1�� Code 740 Office Furniture List. 2.2�� Code 740 Furniture Layout Drawing. 3.�� SAFETY, PPE, AND SHIPYARD ENTRY REQUIREMENTS �� 3.1�� Personal Protective Equipment (PPE). The Contractor is responsible for providing all their employees PPE and ensuring they utilize PPE while on NNSY property. All personnel will follow site requirements for wearing PPE at all times while in a posted area. Mandatory PPE includes a hard hat that shall identify the name of the respective Contractor, safety glasses with side shields, steel-toed safety shoes, and hearing protection on their person in case it is needed. In addition, all personnel shall wear any additional PPE as appropriate to control hazards of the work being performed (examples: life vests, personal fall arrest systems). �� 3.2�� Fall Protection. The Contractor shall provide and utilize proper guarding around every open-sided platform and work surface edge or shall use other means of fall protection to include a fall protection safety harness and lanyard, fall restraint system, safety nets, or other appropriate protection against fall hazards meeting the requirements of 29 CFR 1910, 29 CFR 1915, and 29 CFR 1926. 3.3�� Spill Contingency and Control. The Contractor shall notify Fire Division 757-396-3333 immediately upon discovery of any spill discharge, regardless if Contractor generated or by another source. Notification shall identify when spills/discharges are Contractor caused. The Contractor shall cleanup all Contractor-generated spills/discharges. The Contractor shall maintain cleanup capability commensurate with the spill potential of its work operations. A �clean-as-you-go� work methodology for Contractor work shall be used to maintain a level of cleanliness that will not or cause a work environment that may be unsafe. 3.4�� Hazardous Energy Control. Contractor and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA�s Occupational Safety, Health, and Environmental Corporate Manual (OSHECM) Chapter 250 (latest revision) and Chapter 230 (latest revision), when performing work under NNSY contract.� All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Point of Contact (TPOCs) and/or Contracting Officer�s Representatives (CORs) be notified of the HEC scope of work prior to starting work.� Any changes or deviations in the initial scope of the HEC work requires NNSY TPOCs and/or CORs be informed of the change/deviation.� Appendix 250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC.� HEC locks shall be provided by the contractor or NNGA for their employees use.� The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number.� HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed.� HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out.� OSHECM Chapter 250 Tags-Plus procedures will be strictly followed. In accordance with OSCHECM Chapter 230, REV M, paragraph 230.4.B.7 work on energized equipment less than or equal to 30V, although energized, presents minimal risk to personnel. Therefore, only general safety practices apply to protect sensitive electrical equipment from damage and to protect personnel from hazards. �The general safety practices will be decided by the contractor and NNSY assigned Subject Matter Expert (SME) during the job safety briefing. Contractors and NNGAs may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA 1915.89 web site by using the following link to NNSY�s public access web site: Http://www.navsea.navy.mil/shipyards/norfolk/default.aspx 3.5�� Restricted items. Contractors are prohibited from bringing onto federal property the following items: All forms of alcohol and illegal drugs. Shotguns, handguns, machineguns, firearm silencers, ammunition of any type, blasting caps or similar items of explosive material (i.e. fireworks), starter or flare pistols, pellet or BB guns, dynamite, teargas and their dispensing devices, and other similar devices. Construction tools that require use of explosive materials are authorized if they are required to perform approved duties. Contractors who require one of the prohibited items listed above may bring the item onto the installation in performance of the contract (i.e., bird control, wild life management, etc.), but only when specified in the contract. Any blades in excess of four inches, switch blade knives, underwater spear guns, bows and arrows, crossbows, slingshots and blowguns, throw blade knives, blackjacks, nightsticks, clubs, brass knuckles, tomahawks, swords, bolas, fighting sticks, throwing discs, chains, and other similar items that can be used as a weapon. Cameras, camcorders, cell phones with cameras, computers or tablets with cameras, etc. Smoking is only permitted in designated areas. �� 3.6�� Shipyard Contractor Entry. Commander, Navy Installations Command (CNIC), has established the Defense Biometric Identification System, (DBIDS), a standardized process for granting unescorted access privileges to vendors, Contractors, suppliers and service providers not otherwise entitled to the issuance of a Common Access Card (CAC) who seek access to and can provide justification to enter Navy installations and facilities. The Contractor shall obtain and maintain DBIDS access for NNSY for all of its personnel for the duration of this Contract. For the requirements herein, participation in the DBIDS is mandatory. The Government will not be responsible for any cost or lost time associated with obtaining daily passes or added vehicle inspections incurred by non-participants in the DBIDS. The Contractor and sub-Contractors shall obtain and maintain long-term credentials through enrollment, registration, background vetting, screening, issuance of credentials, and electronic validation of credentials. Further information regarding DBIDS can be found at www.cnic.navy.mil/om/dbids.html. �� 3.7�� Contractor Vehicle Entry. All vehicles entering any naval activity are required to obtain a permit in accordance with facility regulations.� The vehicle permits can be obtained from the NNSY Pass and I.D. Office.� Vehicles will be required to have a company logo or identification visible on both sides.� All Contractor vehicles and equipment, when not in use, shall be locked or removed from the facility or otherwise disabled or secured preventing unauthorized operation. All Contractor vehicles entering NNSY for Contractor work shall bring the following credentials to the Shipyard Pass and ID Office: Current unexpired company vehicle registration Current proof of state inspection (if required by the state the vehicle is registered in) Current proof of insurance Current driver�s license of the Contractor person driving the company vehicle 3.8�� Business hours. Business hours are 7:30am to 4:00pm Monday through Friday excluding federal holidays. 4.�� WORK DESCRIPTION Code 740 Furniture and Installation 4.1.1�� The contractor shall procure and install seating capacity for personnel in the Code 740 office in accordance with Attachments 2.1 and 2.2. Seating shall consist of cubicle style seating with desk area that appears as a free standing wood/laminate �L� shaped desk, matching pedestal, and with six foot tall cubicle/privacy panels as shown in Addendum (2.1). Panels along the windowed wall shall be shorter panels so as not to block windows. The panels shall include powered strips to support duplex outlets under each desk. Panels can be hardwired into nearest wall outlets. Each seat shall have two flip door storage cabinets which mount to the panel over each desk. Each seat shall also include a new ergonomic 5-castor office chair with head rest, black in color. 4.2�� Work Description Requirements 4.2.1�� The contractor shall: �� 4.2.1.1 Provide all material, equipment, labor, and trades and skills to determine desk and other storage cabinet sizes and panel sizes and install the furniture. Deliver and install new approved furniture and cubicle panels including installation of all brackets, wall mountings, electrical receptacles and components required in accordance with the manufacturer�s standards. Electrically install duplex receptacles into the base of the new panels. Level all cubicle panels to match facility floor. The contractor shall notify the government representatives of the expected lead time for ordering, shipping and installation of the Code 740 office furniture. 4.3�� Place of Performance 4.3.1�� NNSY, Portsmouth, VA 23709, building 268. Business hours are 7:30am to 4:00pm Monday through Friday excluding federal holidays. This building does have a cargo elevator. The Code 740 office renovation will require hand carry for removal and installation. 5.�� QUALITY ASSURANCE �� 5.1�� Contractor shall deliver all items new, in carton, and make available for government personnel inspection prior to installation. �� 5.2�� Government personnel shall inspect all panels and furniture prior to and after installation to ensure compliance with this Statement of Work and that no damage occurred during the installation process. 6.�� NOTES �� 6.1�� Government representatives are: Point Of Contact (POC) Will Hebert, Office: 757/396-1314, Cell: 757/944-0077 POC Supervisor Robert Steiner, Office: 757/396-1316, Cell: 757/636-5737 QUANTITY MFGR ITEM NUMBER DESCRIPTION 1 HON HTLHP96 HTLHP96 Conference $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ .~ Undecided LAMINATE2 Option 8 HON H2092 Pillowsoft 2090 Mgr Mid-back Swivel Tilt Arms Conference .H CASTER: Hard (Standard) $(1) Gr 1 UPH ~ Undecided FABRIC Option .T FRAME: Black 1 HON HTLC4896 Preside Preside 96W x 48D Rect Shaped Laminate� Top Conference .G 2MM/Flat ~ Undecided EDGE Option .N No Grommets $(L1STD) Grd L1 Standard Laminates ~ Undecided LAMINATE Option 21 HON HH871236 ELECTRICAL POWER HARNESS 36W� 3-1 & 2-2� SYSTEMS Cubicles 7 HON HH871248 ELECTRICAL POWER HARNESS 48W� 3-1 & 2-2� SYSTEMS Cubicles 7 HON HH879072 BASE IN-FEED CABLE BASE�� 3-1 & 2-2 SYSTEMS Cubicles 12 HON HH870942 TASKLIGHT 42W Cubicles 24 HON HH871504 DUPLEX RECEPTACLE CIRCUIT 4 3-1 & 2-2 SYSTEMS Cubicles .~ Undecided PAINT Option 24 HON HH871501 DUPLEX RECEPTACLE CIRCUIT 1 3-1 & 2-2 SYSTEMS Cubicles .~ Undecided PAINT Option 14 HON HH871502 DUPLEX RECEPTACLE CIRCUIT 2 3-1 & 2-2 SYSTEMS Cubicles .~ Undecided PAINT Option QUANTITY MFGR ITEM NUMBER DESCRIPTION 10 HON HH871503 DUPLEX RECEPTACLE CIRCUIT 3 3-1 SYSTEM ONLY Cubicles .~ Undecided PAINT Option 26 HON HSCKTPS STRAIGHT CONNECTOR KIT Cubicles .X No Option 24 HON HCTL242 24D CANTILEVER ONE PAIR Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 12 HON HCTL181L LEFT-HAND CANTILEVER 18 IN D Cubicles $(P1) Select P1 Paint ~ ~Undecided~ 12 HON HCTL181R RIGHT-HAND CANTILEVER 18 IN D Cubicles $(P1) Select P1 Paint ~ ~Undecided~ 5 HON HLSLPBL VOI O-LEG TO PANEL BRACKET LEFT (QTY 1) Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 7 HON HLSLPBR VOI O-LEG TO PANEL BRACKET RIGHT (QTY 1) Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 14 HON HECC15 CORD COVER 15INVERTICAL HEIGHT Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 7 HON HESDMK36 ACCELERATE SLIDING DOOR FRAME 36W Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ QUANTITY MFGR ITEM NUMBER DESCRIPTION 8 HON HH18042SD ABOUND SLIDING DOOR 80H X 42W Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 1 HON HESDMK36 ACCELERATE SLIDING DOOR FRAME 36W Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 50 HON HETC36 PANEL TOP CAP 36W Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 7 HON HETC48 PANEL TOP CAP 48W Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 12 HON HEFEC50P PANEL FINISHED END COVERS 50H Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 10 HON HEC80PT T CONNECTOR 80H Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 12 HON HECVH30P VARIABLE HEIGHT CONNECTOR KIT 30H Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 4 HON HEC80PL L CONNECTOR 80H Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ QUANTITY MFGR ITEM NUMBER DESCRIPTION 12 HON HEFEC80P PANEL FINISHED END COVERS 80H Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 2 HON HES1536F FABRIC STACKER 15H X 36W Cubicles $(A) Gr A Fabric ~ ~Undecided~ 1 HON HES1548F FABRIC STACKER 15H X 48W Cubicles $(A) Gr A Fabric ~ ~Undecided~ 24 HON HEOHRTA1536FD 15H X 13D X 36W FLIPPER DOOR� OVERHEAD Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 12 HON HEOHRTA1548FD 15H X 13D X 48W FLIPPER DOOR� OVERHEAD Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 24 HON HLSL2428O 24D X 28H O-LEG SUPPORT FOR WKSF (SINGLE� LEG) Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ 12 HON HES1536G GLASS STACKER 15H X 36W Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ .Q Glass: Clear 6 HON HES1548G GLASS STACKER 15H X 48W Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ .Q Glass: Clear QUANTITY MFGR ITEM NUMBER DESCRIPTION 24 HON H36720R BRIGADE PED R PULL FREESTANDING B/B/F 20D X� 28H Cubicles .L Lock: Lock $(P1) P1 Paint Opts ~ ~Undecided~ 24 HON H36820R BRIGADE PED R PULL FREESTANDING F/F 20 20D X� 28H Cubicles .L Lock: Lock $(P1) P1 Paint Opts ~ ~Undecided~ 24 HON HES3036G CLEAR GLASS STACKER 30H X 36W Cubicles $(P1) P1 Paint Opts ~ ~Undecided~ .Q Glass: Clear 14 HON HETP6536FP TACKABLE PANEL W/O TC 65H X� 36W Cubicles $(A) Gr A Fabric ~ ~Undecided~ $(P1) P1 Paint Opts ~ ~Undecided~ 7 HON HETP6548FP TACKABLE PANEL W/O TC 65H X� 48W Cubicles $(A) Gr A Fabric ~ ~Undecided~ $(P1) P1 Paint Opts ~ ~Undecided~ 36 HON HETP5036FP TACKABLE PANEL W/O TC 50H X� 36W Cubicles $(A) Gr A Fabric ~ ~Undecided~ $(P1) P1 Paint Opts ~ ~Undecided~ QUANTITY MFGR ITEM NUMBER DESCRIPTION 12 HON HWV93AALP SYSTEMS 72X36X24X24LEFT CORNER COVE WKSFC ED Cubicles Cubicles 4�� Cubicles Cubicles Offices Offices $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ .~ Undecided EDGE Option .~ Undecided GROMMET Option 12 HON HWV93AARP SYSTEMS 72X36X24X24RT CORNER COVE WKSFC EDGE $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ .~ Undecided EDGE Option .~ Undecided GROMMET Option 12 HON HWR2448P SYSTEMS RECTANGULAR WORKSURFACE EDGEBAND 2 $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ .~ Undecided EDGE Option .~ Undecided GROMMET Option 24 HON HIWMM IGNITION 2 TASK MID-BACK ILIRA BACK .Y1 Syncho-Tilt W Seat Slider .A Arm: Height and Width Adj. Arm .H Hard Caster .~ Undecided BACK Option $(1) Gr 1 UPH ~ ~Undecided~ .AL Adjustable Lumbar .SB Base: Standard Base .T Frame: Black 14 HON HH870960 TASKLIGHT 60W 14 HON H10592 10500 SERIES DESK SHELL� 72W X 30D X� 29-1/2H $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ QUANTITY MFGR ITEM NUMBER DESCRIPTION 14 HON H10502 10500 SERIES FLOORSTND FULL HT PED B/B/F 15-5/8W Offices $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ 14 HON H10504 10500 SERIES FLOORSTNDING FULL HT PED F/F 15-5/8 Offices $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ 14 HON H10534 10500 SERIESSTACK-ON STORAGE 72W X 14-5/8D X �37 Offices $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ 14 HON H90056 10500 SERIES TCKBD FOR 72W STACK ON STRG BCK E N Offices $(A) Gr A Fab ~ ~Undecided~ 14 HON H105856 10500 SERIES BACK ENCLOSURE FOR 72W STACK ON S Offices $(L1STD) Grd L1 Standard Laminates ~ ~Undecided~ 14 HON HIWMM IGNITION 2 TASK MID-BACK ILIRA BACK Offices .Y1 Syncho-Tilt W Seat Slider .A Arm: Height and Width Adj. Arm .H Hard Caster .~ Undecided BACK Option $(1) Gr 1 UPH ~ ~Undecided~ .AL Adjustable Lumbar .SB Base: Standard Base .T Frame: Black ��
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/dd95663830ab4f219b13ab56e557ae4e/view)
Place of Performance: Address: Portsmouth, VA 23709, USA; Zip Code: 23709; Country: USA
Record: SN05962833-F 20210407/210405230103 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

71 -- Cubicle Furniture