SOLICITATION NOTICE
A -- Characterization of Metal below Paint and Loose Corrosion
- Notice Date
- 4/6/2021 5:23:40 AM
- Notice Type
- Solicitation
- NAICS
- 541715
— Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- ZIP Code
- 00000
- Solicitation Number
- FMP-NNL-007
- Response Due
- 5/3/2021 12:00:00 AM
- Archive Date
- 05/18/2021
- Point of Contact
- Nicole Merriman, Gretchen R. Belanger
- E-Mail Address
-
nicole.merriman@unnpp.gov, gretchen.belanger@unnpp.gov
(nicole.merriman@unnpp.gov, gretchen.belanger@unnpp.gov)
- Description
- Shipyards have been ineffective at estimating and bounding the preservation and structural repairs required for external hull welds.� Underestimating structural repairs leads to production and contractor churn, work execution delays, and unexpected costs during maintenance periods. Preservation repairs are determined based on the as-arrived paint condition, which can initially be assessed as small touch-up paint repairs or extensive coating replacements.� Structural repair scope growth can have a gradual impact on an availability, since small increases to predicted scope can often be absorbed without significant impact to schedule.� However, large increases to structural weld repairs can have a significant impact to cost and schedule of an availability. Visual inspections are the basis for scoping the preservation and structural evaluation scope.� These visual inspections require a person to enter the space and is limited by what the inspector can see in a painted, corroded condition.� It is not until the paint and corrosion are removed by abrasive blasting that the inspector can completely and accurately quantify the amount of structural repairs required.� Reliance on visual inspections alone limits the ability to accurately assess current conditions and predict the future scope of work.� NNL is interested in technologies that can measure the degree of metal loss through paint and loose corrosion A new or available technology that can characterize the condition of metal (i.e., metal loss) through paint and loose corrosion is requested for submission.� The standard material is HY-100 base material, using HY-80 weld filler material.� The ideal state for the technology would be for the inspection to be performed inboard of the hull, to support the ship being waterborne.� The intent is to perform the inspection without removing paint or interferences.� Update 3/29/2021: Additional attachment provided with Needs Statement from a shipyard interface. Update 4/6/22021: Updated Request for Proposal document (Rev. 1)�to correct contact information for FMP-NNL-006. Keywords: NDE, Non-Destructive Examination, Inspection
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/21c447a3d6254fb9a9a07a3ef0a409a6/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN05963407-F 20210408/210406230112 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |