SOLICITATION NOTICE
66 -- NX EQ Automated Coverslipper Machine
- Notice Date
- 4/15/2021 7:30:52 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- STRATEGIC ACQUISITION CENTER FREDERICKSBURG (36C10G) FREDERICKSBURG VA 22408 USA
- ZIP Code
- 22408
- Solicitation Number
- 36C10G21Q0037
- Response Due
- 5/16/2021 8:59:00 PM
- Archive Date
- 08/23/2021
- Point of Contact
- Ninatile Bacote, Contract Specialist, Phone: 202-957-2173
- E-Mail Address
-
Ninatile.Bacote@va.gov
(Ninatile.Bacote@va.gov)
- Awardee
- null
- Description
- Solicitation Number: 36C10G21Q0037 Notice Type: Combined Synopsis/Solicitation Synopsis: COMBINED SYNOPSIS/SOLICITATION This is a combined synopsis/solicitation for brand name or equal commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation number 36C10G21Q0037 is issued for this combined synopsis/solicitation; this solicitation is being issued as a Request for Quote (RFQ). This combined synopsis/solicitation incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2021-05, dated 10 March 2021. Requirement Description: VA has a requirement to purchase Automated Coverslipper Machines to deliver patient care at its VA Medical Centers around the country. Automated Coverslipper Machines are automated machines, dealing with the tedious task of adding coverslips to microscope slides. Its capability of handling a large variety of slide racks from different suppliers makes it very flexible. All common mounting media can be used, and the operator can choose wet or dry coverslipping. The Automated Coverslipper Machines performance achieves three goals: highly consistent and reliable coverslipping quality, full adaptation to individual laboratory set-ups, and integration into staining/coverslipping workstations to form a fully automated walk-away system. A single award Requirements contract will be awarded for the purchase of brand name or equal equipment in accordance with all terms, conditions, provisions, specifications, and schedule of this solicitation herein. Quotes shall contain the terms for cost/price and technical capabilities of the band name or equal equipment. The Government reserves the right to award without discussions. The associated North American Industrial Classification System (NAICS) code for this procurement is 339112 Surgical and Medical Instrument, Product Service Code: 6515 Medical and Surgical Instruments, Equipment, and Supplies and the associated size standard is 1,000 employees. This procurement action is issued as full and open competition. This acquisition is for a single award Requirements contract in accordance with FAR Part 16.5 for Leica® brand name or equal Automated Coverslipper Machines and related equipment and accessories as identified in ATTACHMENT A NX EQ AUTOMATED COVERSLIPPER MACHINES PRICE COST SCHEDULE. All interested companies shall provide a quote for all Contract Line Item Numbers (CLINs) listed in ATTACHMENT A NX EQ AUTOMATED COVERSLIPPER MACHINES PRICE COST SCHEDULE. The ordering period is for one year with four 12-month option years. Delivery is FOB destination. Firm-Fixed Price Orders will be placed against this contract in writing and will provide the delivery locations, delivery dates and exact quantities. The FAR provision at 52.212-1, Instructions to Offerors Commercial, applies to this acquisition including attached addenda to the provision. The FAR provision at 52.212-2, Evaluation -- Commercial Items, and the specific evaluation criteria as attached addenda also applies to this acquisition The Offeror is to include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items, with its offer. Clause at 52.212-4, Contract Terms and Conditions -- Commercial Items, applies to this acquisition and a statement regarding any addenda to the clause. Addendum is attached. Clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items, applies to this acquisition and a statement regarding which, if any, of the additional FAR clauses cited in the clause are applicable to the acquisition. Addendum is attached. All interested Offerors must be registered in the System for Award Management (SAM) prior to submitting an offer or quotation. You may access SAM at https://sam.gov/SAM/. Questions regarding this combined synopsis/solicitation are due via email by 11:59PM EST on April 29, 2021 to Contract Specialist, Ninatile Bacote at Ninatile.Bacote@va.gov and Contracting Officer, Timothy Johnson at Timothy.Johnson13@va.gov. No calls will be accepted. Quotes are due via email by 11:59PM EST on May 16, 2021 to Contract Specialist, Ninatile Bacote at Ninatile.Bacote@va.gov and Contracting Officer, Timothy Johnson at Timothy.Johnson13@va.gov. Product Description Salient Characteristics Literature Review 1. SCOPE OF WORK: The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Automated Coverslipper Machines product line as a candidate for a VA-wide (otherwise referred to as national ) single Requirements contract award. Automated Coverslipper Machines are automated machines, dealing with the tedious task of adding coverslips to microscope slides. They are able to use a variety of mounting media and many allow the operator to between wet or dry Coverslipping. The Automated Coverslipper Machines performance achieves three goals: highly consistent and reliable coverslipping quality, full adaptation to individual laboratory set-ups, and integration into staining/coverslipping workstations to form a fully automated walk-away system. The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide Automated Coverslipper Machines to be used by clinicians throughout the VA medical centers and facilities. The period of performance is for one 12-month base period with four 12- month option periods. 2. REQUIREMENT This requirement will be IAW FAR clause 52.211-6, Brand Name or Equal which requires the quoter indicate that each product being offered as an equal product to the Leica® brand name Automated Coverslipper Machines. For each equal product, the offeror must include a description reflecting the salient characteristics (SC) and level of quality that will satisfy the salient physical, functional, or performance characteristics of the equal product(s) specified in the solicitation. The quoter must also clearly identify the item by brand name (if any) and make/model number. Finally, the quoter must include descriptive literature, such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer, and clearly describe any modifications it plans to make to a product to make it conform to the solicitation requirements. Contract Line Items Manufacturer Part Number Description 0001 Leica 14047839700 Leica CV5030 Robotic Coverslipper Basic instrument - 100-250 VAC / 50-60 Hz 0002 Leica 149CVTS5025 Configuration 1 Leica CV5030 - Robotic Coverslipper 100-250 VAC / 50-60 Hz - Configuration connected with transfer station TS5025 for use with Leica ST5020 - Multistainer as automated workstation 0003 Leica 149CVTS5015 Configuration 2 Leica CV5030 - Robotic Coverslipper 100-250 VAC / 50-60 Hz - Configuration connected with transfer station TS5015 for use with Leica ST5010 Autostainer XL as automated workstation 0004 Leica 14041157009 Power Cord Various NEMA5-15-C13 The Department of Veterans Affairs (VA) is seeking vendors who can provide Leica® brand name Automated Coverslipper Machines as listed above or equal commodities which meet all of the following salient characteristics. Offeror may propose any product solution or configuration so long as they meet the salient characteristics. SC # Applicable CLINs Salient Characteristics Method of Evaluation Page # Where SC Is Found in Technical Literature SC 1 0001-0003 Throughput: Minimum 300 Slides/Hour, Glass Literature Review SC 2 0001-0003 Works with coverslips in various sizes Literature Review SC 3 0001-0003 Allows for Adjustment of Mounting Media Volume Literature Review SC 4 0001-0003 Able to Utilize Xylene Literature Review SC 5 0001-0003 Fume Extraction via Activated Carbon Filter Literature Review SC 6 0001-0003 Benchtop Unit Literature Review SC 7 0001-0004 Able to Operate on 115 VAC 60 Hz Literature Review
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/eeaba4c91fbb41389d00c4fb78b75d1c/view)
- Place of Performance
- Address: Nationwide
- Record
- SN05974019-F 20210417/210415230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |