SOURCES SOUGHT
65 -- DENTAL PROSTHETICS LAB WORKSTATIONS
- Notice Date
- 4/22/2021 5:53:16 AM
- Notice Type
- Sources Sought
- NAICS
- 339116
— Dental Laboratories
- Contracting Office
- 257-NETWORK CONTRACT OFFICE 17 (36C257) ARLINGTON TX 76006 USA
- ZIP Code
- 76006
- Solicitation Number
- 36C25721Q0715
- Response Due
- 4/28/2021 7:00:00 AM
- Archive Date
- 05/13/2021
- Point of Contact
- Dr. Vinicky Ann Ervin Ph.D., Contract Specialist, Phone: Please title Email Subject with the following:, Fax: RFI Lab Workstations
- E-Mail Address
-
vinicky.ervin@va.gov
(vinicky.ervin@va.gov)
- Awardee
- null
- Description
- Department of Veterans Affairs Veterans Health Administration (VHA) Sources Sought Notice Obtain WORKSTATIONS. This is a Sources Sought notice and not a request for quotes. This request is solely for the purpose of conducting market research to enhance VHA s understanding of your company s offered services and capabilities. The Government will not pay any costs for responses submitted in response to this Source Sought Notice. This Sources Sought notice provides an opportunity for respondents to submit their capability and availability to provide the service requirement described below. Vendors are being invited to submit information relative to their potential to fulfill this requirement, in the form of a capability response that addresses the specific requirement identified in this Sources Sought. The Veterans Health Administration (VHA) is seeking to obtain brand name or equal WORKSTATIONS and San Antonio, TX. Refer to the General Requirements section below for the requested product description. This Sources Sought is to facilitate the Contracting Officer s review of the market base, for acquisition planning, size determination, and procurement strategy. General Requirements: Brand name or equal WORKSTATIONS are needed for the San Antonio, TX in accordance with the following requirements: ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEM (POS-01) FOR THE DENTAL PROSTHETICS LAB 0002 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEMS (POS-02) FOR DENTAL PROSTHETICS LAB. 0003 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEMS (POS-03) FOR DENTAL PROSTHETICS LAB 0004 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEM (POS-04) FOR DENTAL PROSTHETICS LAB 0005 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEM (POS-05-12) FOR DENTAL PROSTHETICS LAB 0006 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEM (POS 13-16) FOR DENTAL PROSTHETICS LAB 0007 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEMS (POS 17-18) FOR DENTAL PROSTHETICS LAB 0008 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEM (POS 19-20) FOR DENTAL PROSTHETICS LAB 0009 1.00 EA $00.00 $00.00 WORKSTATIONS/SYSTEMS (POS 21-24) FOR DENTAL PROSTHETICS LAB 0010 1.00 EA $00.00 $00.00 OTHER ITEMS ASSOCIATED WITH WORKSTATIONS IN DENTAL PROSTHETICS LAB GRAND TOTAL $00.00 Item Name: Tank Assembly, Boilout/Curing, Double Basis of Design Brand or Equal: Nevin Laboratories | Electric Boilout/Washout/Curing Unit w/Cabinet | 26105SSWCEL Width: 35 in. Depth: 24 in. Height: 36.75 in. Salient Characteristics: Main Image: Boilout/Washout/ Curing Unit. Vented cabinet with internal shield. Electric fuel. Features four-faucet washout tank, heavy duty recirculating pump, and is built of heavy gauge stainless steel. Curing unit-holds 8 two flask compresses-16 flasks. Sinks built into stainless steel top. Optional faucet #P26105-30F available to fill tanks. Item Name: Workstation, Dental Lab, Tech, Single Station Basis of Design Brand or Equal: Nevin Laboratories | Ergotech 9748 w/1604 Cabinet | 9748 / 1604 Width: 82 in. Depth: 24 in. Height: 62 in. Salient Characteristics: Main Image: Dental workstation with one modular cabinet. Features a vibration-free, fractional horsepower, variable speed dust collector motor with a lighted power switch. Operates in manual or automatic modes with disposable filter bag and removable suction hood and safety shield. Constructed with 1/2 inch work surface with vinyl top saver, stainless steel scrap drawer, all steel construction with powder coat finish, pre-piped for gas and air, pre-wired for electricity, and has an AGA approved gas valve for Bunsen burner. Also with OSHA compliant air gun with regulator, drawer storage cabinet, and 110 watt lighting system with 2 case pan storage shelves. Modular cabinet has 4 drawers and is pre-treated with a phosphate coating to minimize corrosion; scratch resistant. Finish Options: Arctic steel color and Sanded Grey solid surface color. Item Name: Casting & Soldering (natural gas & O2, gold melting) Basis of Design Brand or Equal: DentalEZ Group | E135 Casting & Soldering Unit Width: 43 in. Depth: 30 in. Height: 37 in. Salient Characteristics: Main Image: Casting & Soldering bench in a compact, ergonomic design. The unit comes complete with a cutout and casting well, 3 drawers for storage, knock-outs for air & gas connection, a 6"" riser and two duplex outlets. Available with a backsplash in place of the 6"" riser; bench depth will be 23"". Order with Soap stone top Finish Options: Soap stone top Item Name: Workstation, Dental Lab, Microblasting Basis of Design Brand or Equal: DentalEZ Group | 2420 -Cabinet/Vaniman Sandvac Width: 24 in. Depth: 24 in. Height: 36 in. Salient Characteristics: Main Image: Cabinet with Dental sandblaster with filter-fan and light. Fluorescent illuminated panoramic viewing area and self-contained sand filter system. Item Name: Workstation, Dental, w/ Benchtop Polishing Unit Basis of Design Brand or Equal: DentalEZ Group | Modular Workstation w/80502 Width: 43 in. Depth: 30 in. Height: 37 in. Salient Characteristics: Main Image: Modular workstation w/ Dental polishing hood with suction and light. Accommodates most lathes. Built-in suction, two disposable filter bags, safety switch with manual reset. Lights and safety shields over each spindle. Two removable rubber splash pans. OSHA compliant. Item Name: Chair, Rotary, Laboratory, Dental Basis of Design Brand or Equal: HON Industries | ComforTask 5900 Series (H5905) | H5905 Width: 26.75 in. Depth: 30 in. Height: 49.75 in. Salient Characteristics: Main Image: High task stool. Pneumatic seat height adjustment (21-3/4 to 31-7/8in.), back and foot ring height adjustment. Molded polymer outer back. Available with optional heel glides. Maximum user weight of 300-lbs. Finish Options: CF Stinson Oxford Color Nightshade SCFSOXF98 Item Name: Press, Flask, Pneumatic Basis of Design Brand or Equal: Nevin Laboratories | 832 Pneumatic | 83200 Width: 10 in. Depth: 8.5 in. Height: 21.75 in. Salient Characteristics: Main Image: Pneumatic denture flask press. Requires two-hand operation to comply with OSHA standards. Converts 1 psi of line air pressure to 75 lbs of applied pressure. Supplied with combination filter/regulator with drain lock. Item Name: Sandblaster, Complete Basis of Design Brand or Equal: Renfert USA | BASIC quattro IS (Immediate Stop) | 29591000 Width: 15.75 in. Depth: 20.25 in. Height: 12.75 in. Salient Characteristics: Main Image: Dental sandblasting unit with immediate stop. Two blasting tanks standard (can be upgraded to a 3 or 4 tanks). Working pressure 1-6 bar; connecting pressure (external) 5-8 bar. Features LED lights and PerfectView technology which offers contour and detail recognition, as well as 4,800 lux in the illuminated sandblasting chamber. Easy tank upgrade (tool-free), integrated air blast nozzle for cleaning, and large blasting chamber 20 l volume. Washable/interchangeable hand port cuffs, ventilation slits. Tank selection switch, pressure regulator, and foot switch. Includes sandblasting nozzle 0.8 mm green IT and sandblasting nozzle 1.2 mm red IT. VAAR 852.212-72 Gray Market Items: a) Gray market items are Original Equipment Manufacturers' (OEM) goods sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new OEM medical equipment only for VA Medical Centers. No remanufactures or gray market items will be acceptable. (b) Vendor shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed equipment/system, verified by an authorization letter or other documents from the OEM, such that the OEM's warranty and service are provided and maintained by the OEM. All software licensing, warranty and service associated with the equipment/system shall be in accordance with the OEM terms and conditions. (End of clause) FAR 52.212-2 Evaluation-Commercial Items: A copy of the authorized distributor letter from the contractor to verify that you are an authorized distributor of the products/services SHALL BE SUBMITTED WITH THE QUOTE AND IS MANDATORY. Please title email with RFI Solicitation Number and Title
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/97a26282685c4251a18e193856a35f6b/view)
- Place of Performance
- Address: SA Northwest Health Care Center 9939 State HWY 151, San Antonio, TX 78251, USA
- Zip Code: 78251
- Country: USA
- Zip Code: 78251
- Record
- SN05981094-F 20210424/210422230119 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |