SOLICITATION NOTICE
84 -- Service, Hat, Drill Instructor, Olive Drab, Army, Men's
- Notice Date
- 4/23/2021 5:43:13 AM
- Notice Type
- Presolicitation
- NAICS
- 315990
— Apparel Accessories and Other Apparel Manufacturing
- Contracting Office
- DLA TROOP SUPPORT PHILADELPHIA PA 19111-5096 USA
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE1C121R0057
- Response Due
- 5/7/2021 12:30:00 AM
- Archive Date
- 05/22/2021
- Point of Contact
- Sharan Khaira, Phone: 2157372319, Earl Joyner, Phone: 2157376040
- E-Mail Address
-
sharan.khaira@dla.mil, Earl.joyner@dla.mil
(sharan.khaira@dla.mil, Earl.joyner@dla.mil)
- Description
- Pre-solicitation Notice / Synopsis for Solicitation No: SPE1C1-21-R-0057 This is for the purchase of the following: ������������������������������ Item 0001: Service, Hat, Drill Instructor, Olive Drab, Men�s, Army NSN Series: 8405-01-157-1143 MULTIPLE ����������� PGC: 00346 Spec/Cid Number: A-A-50526C Spec/Cid Date: 21 February 1995 Annual Estimated Quantity (AEQ): 7,860 This acquisition will be issued as a Total Small Business Set-Aside for the manufacture and delivery of the Service, Hat, Drill Instructor, Olive Drab, Army (PGC 00346). The Service, Hat, Drill Instructor, Olive Drab, Army, shall be manufactured in accordance with A-A-50526C dated 21 February 1995. Pattern Date: 21 February 1995. This procurement will result in one award of an Indefinite Delivery, Indefinite Quantity, Firm Fixed Price Type contract with a one (1) year base term and four (4) (one-year) option terms. The guaranteed minimum and annual estimated quantities (AEQ) for Item 0001 will be 3,850 min and 9,624 AEQ each under the base term and each option term. The Annual Order Limitation Quantity (AOLQ) per Term is 12,030 each. The AOLQ refers to the annual ordering limitation in FAR 52.216-19.�Therefore, the overall contract maximum quantity is 60,150 each. This will be a Contractor Furnished Materials award. All materials required in the performance of this contract shall be furnished by the Contractor*. �*NOTE: ONLY DOMESTIC MANUFACTURED ITEMS WHICH ARE MADE FROM 100% DOMESTIC PRODUCTS ARE PERMITTED. Under the initial delivery order there will be twelve (12) monthly deliveries that will be required starting 120 days after the date of award with subsequent orders due in 90 days. The delivery destination for these items is located in Pendergrass, GA. Source Selection criteria will be used for award evaluation purposes in accordance with FAR 15.101-1. For award evaluation purposes technical merit is more important than price. Evaluation Factors for award are Past Performance Confidence Assessment, Product Demonstration Models (PDM) and Proposed Price in that order. The Government intends to use FAR Part 12 for this acquisition. All items must be 100% U.S. Made from 100% U.S. Materials. Offerors will be required to submit a total of one (1) Product Demonstration Models (PDM) from each proposed place of performance; one (1) size Medium; and a history of their experience/past performance record from the period three years prior to the solicitation closing date. PDMs must be submitted with offers.� Past Performance will be the most important evaluation factor, PDM(s) which will be evaluated for conformance to the specifications, followed by Price. Availability of solicitations, FAR 5.102(d) applies, as our office no longer issues solicitations or amendments in paper form. The Solicitation will be posted on DIBBS and beta.sam.gov. Please check both. Refer to the following when viewing solicitation on Dibbs: The Solicitation will be posted on https://www.dibbs.bsm.dla.mil/� Detailed system requirements and instructions for registration can be found on the DLA DIBBS Home Page accessed on https://www.dibbs.bsm.dla.mil/.� A few highlights of the information that will be found include: 1. On the DLA Internet Bulletin Board System (DIBBS) Home Page, click the VENDOR REGISTRATION link to begin the registration process.� 2. In order to register for access to secure portions of DLA DIBBS, the company you are representing must already be registered in the System for Award Management (SAM)(https://www.sam.gov).� 3. A Commercial and Government Entity (CAGE) Code registration will be processed immediately.� A User ID will appear on the registration screen and a password will be sent separately to the email address of the Super User.� If a CAGE is already registered on DLA DIBBS, the name and email address of the Super User will be provided.� The Super User should be contacted to set-up additional accounts, logons and passwords for their CAGE.� DIBBS Super User * If your CAGE has already been registered on DIBBS, the name and email address of the person designated as your super user will be provided. * The representative who starts the DIBBS registration process has the option to accept their SAM registration POC as the DIBBS super user, or they can designate themselves or another person to act as the super user for the CAGE. * The super user acts as the account administrator for a CAGE. They can add up to ninety-eight (98) additional users, provide user IDs and passwords, modify existing users, and control the login status of each user for their CAGEs through My Account (Account Maintenance). ****The Defense appropriations and authorization acts and other statutes (including what is commonly referred to as �The Berry Amendment�) impose restrictions on the DoD�s acquisition of foreign products and services.� Generally, Clothing and Textile items (as defined in DFARS clause 252.225-7012) and �specialty metals� (as defined in DFARS clause 252.225-7014), including the materials and components thereof (other than sensors, electronics, or other items added to, and not normally associated with clothing), must be grown, reprocessed, reused, melted or produced in the United States, its possessions or Puerto Rico, unless one of the DFARS 225.7002-2 exceptions applies. NOTICE TO DLA SUPPLIERS: DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for this solicitation use the following link to the DLA Troop Support C&T Technical Data Repository area at: http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx � Please ensure the following required fields are entered when submitting your request: � Spec/Cid Number: A-A-50526C Spec/Cid Date: 21 February 1995 Pattern Date: 21 February 1995 Item 0001: Service, Hat, Drill Instructor, Olive Drab, Army (PGC: 00346) Solicitation Number: SPE1C1-21-R-0057 Upon submission of a technical data request, please notify the Contract Specialist, Sharan Khaira, via e-mail at Sharan.khaira@dla.mil������� The point of contact for subject acquisition is: Sharan Khaira, Contract Specialist Email: Sharan.khaira@dla.mil
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/c4af5274dca04673a98984895897f8ec/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN05981979-F 20210425/210423230113 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |