SOLICITATION NOTICE
66 -- Dissolution Vessel Washer
- Notice Date
- 4/28/2021 8:14:16 AM
- Notice Type
- Solicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- FDA OFFICE OF ACQ GRANT SVCS Beltsville MD 20705 USA
- ZIP Code
- 20705
- Solicitation Number
- 75F40121Q00047
- Response Due
- 5/5/2021 10:00:00 AM
- Archive Date
- 05/20/2021
- Point of Contact
- Michael Gemmill
- E-Mail Address
-
Michael.Gemmill@fda.hhs.gov
(Michael.Gemmill@fda.hhs.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The contractor shall provide a Dissolution Vessel Washer. The instrument shall meet or exceed the following requirements: � The instrument shall consist of a rinse tank and a waste tank contained in a mobile unit with pumps and universal wash module. � The universal wash module shall have a wash nozzle and drain assembly that empties a dissolution vessel, then performs a complete 360� wash that provides a thorough cleaning of the entire vessel in less than 60 seconds. � The universal wash module shall have the ability to securely fit into any (U. S. Pharmacopeia (USP) conforming 1 Liter vessel, regardless of the bath or vessel manufacturer. � The universal wash module shall have a self-adjusting drain that allows for vessel height variations. � The instrument shall have an integrated shaft rinse wand that provides a method for cleaning the shaft and stirring elements on the dissolution apparatus. � The instrument shall have the capability of cleaning at least 28 1 Liter vessels in under 15 minutes. � The rinse tank shall have a volume of at least 38 Liters. � The rinse tank shall have electric level sensors for full/empty determination and a sight gauge indicator. � The rinse tank shall have a fill port equipped with quick disconnect fittings on the top cover and automatic shut-off capability. � The waste tank shall have a volume of at least 76 Liters. � The waste tank shall have electric level sensors for full/empty determination and a sight gauge indicator. � The instrument shall have temperature control with an electronic immersion heater with a temperature range from 25� to at least 60�C. � The instrument shall have a continuous LED display of rinse tank temperature. � The instrument shall have a RS-232 and a USB 2.0 interface port. � The instrument shall be constructed with acid resistant heating elements. � The instrument shall have electrical power of 115V � 15V, 50/60 Hz, and 10A preset at the factory. � The instrument body must not exceed the following measurements: 26 inches in width, 26 inches in depth and 39 inches in height.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/91b4d10eee454f298c63e02d486ff373/view)
- Place of Performance
- Address: Irvine, CA 92612, USA
- Zip Code: 92612
- Country: USA
- Zip Code: 92612
- Record
- SN05986129-F 20210430/210428230121 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |