SAMDaily.us | PRESOL | 51 | 51--tools

SAMDAILY.US - ISSUE OF MAY 08, 2021 SAM #7098
SOLICITATION NOTICE

51 -- 51--tools

Notice Date: 5/6/2021 11:53:31 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 333991 — Power-Driven Handtool Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: BRAGGDPWRDE0081
Response Due: 5/10/2021 12:00:00 PM
Archive Date: 11/06/2021
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is BRAGGDPWRDE0081 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 333991 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-05-10 15:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Pope Army Airfield, NC 28308 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: 2ELD6 WESTWARD: 6"" Adjustable Wrench, Cushion Grip Mfr#: 6WCB, 1, EA; LI 002: 1YHL6 WESTWARD: 8"" Adjustable Wrench, Cushion Grip : Mfr#: 8WCB, 1, EA; LI 003: 39FV52 DREMEL: Accessory Kit (70 pieces): Mfr#: EZ725, 1, EA; LI 004: 7 ft x 16 ft tandem Axle Utility Open bed Trailer (Heavyduty), 1, EA; LI 005: Item# 753540 KOBAL T Smooth-Face Plastic DeadBlow Hammer Model# 646525, 2, EA; LI 006: ST SKU# 125270 Model# 62965Q Internet# 203110583 QEP floor Demolition Tear Out Scraper & Stripper w/ Reversible Head, 2, EA; LI 007: Model# 75006Q Store SKU #786500 QEP T' Wide Floor Scraper and Stripper with 48 in. Handle and Foot Peg, 2, EA; LI 008: H27-291 FIELDPIECE: In Duct Digital Psychrometer Mfr#: SRH3, 1, EA; LI 009: H27-204 General Tools: 3"" Carbon Fiber Caliper Mfr#: 1433, 1, EA; LI 010: H26-266 Gearwrench: 7-Piece Pivot Ratcheting Comb. Wrench Set Mfr#: 9700, 1, EA; LI 011: H28-388 Klien Tools: 4-in-1 Electronic Screwdriver Mfr#: 32581, 1, EA; LI 012: H28-091 Diversitech: Nitrogen Purge Tool Mfr#: DP-1, 1, EA; LI 013: H28-091 Lenox: Tube Cutter: 1 /8"" to 1-3/8"" : Mfr#: 21011TC138, 1, EA; LI 014: H26-508 Lenox: Tube Cutter: 1 /8"" to 1-3/8"" : Mfr#: 21011TC138, 1, EA; LI 015: H27-417 CPS: Molecular Transformator Mfr#: MT69, 1, EA; LI 016: Mfr#: Type 17-15 UNIWELD: Torch Tip Rosebud: Type 17-15, 1, EA; LI 017: UNIWELD: Torch Tip Rosebud: Type 17-30 Mfr#: Type 17-30, 1, EA; LI 018: Mfr#: FB12 UNIWELD: Flame Barrier : 12""x12"", 1, EA; LI 019: MILWAUKEE: Step Drill Bit Set: 1/8"" to 1-1/8"" 19RK85, 4, EA; LI 020: Mfr#: MWT-PBSET-01 MIDWEST: Pookie Buster Screw Bits, 1, EA; LI 021: 1GDL7 DIVERSITECH: Drain Cleaning Gun, 1, EA; LI 022: GGC-12 DIVERSITECH: SWOOSH CO2 Cartridge, 2, EA; LI 023: I.JOHNSTONE: B-TANK (Acetylene} Tote tt-150 PN: H25-036, 1, EA; LI 024: PN: H28-259 I.JOHNSTONE: Sensible Products: One Trip Hook #OTH-1, 1, EA; LI 025: Mfr#: 4091231 ?MPROBE: Tip Sensors : Mfr#: RLD-1, 2, EA; LI 026: 36475 RIDGID 36475 EXPOSED RATCHET THREADER� TO 2 INCH NPT DIES AND MANUAL RATCHET, 1, SET; LI 027: RIDGID 22088 EXTREME PERFORMANCE AEROSOL THREAD, 12, EA; LI 028: PAS-225VP ECHO WEEDEATER /EDGER COMBO KIT CUTTING OIL 16 OZ CAN, 1, EA; LI 029: 99944200907 UNIVERSAL SPEED FEED HEAD ECHO BRAND, 2, EA; LI 030: 69601553630 2PACK EDGER BLADES .181 7HICK, 2, EA; LI 031: 7450010 RED ARMOUR FUEL 110 FL OZ, 2, EA; LI 032: 5YE63 FLUKE : Temp./Humidity Meter: Mfr#: FLUKE 971, 1, EA; LI 033: 3LZG3 FLUKE: Digital Pocket Thermometer: Mfr#: TPP1-C1, 1, EA; LI 034: RAINGER APP.: Pocket Liquid Glass Therm. (0-220 F): Mfr#: 6DKDO 6DKDO, 2, EA; LI 035: Harbor Freight: item#: 56329 BRAUN: Slim Bar Folding Magnetic LED 390 Lumens: Mfr#: 56329, 1, EA; LI 036: 5YE63 FLUKE : Temp./Humidity Meter: Mfr#: FLUKE 971, 1, EA; LI 037: 3LZG3 !FLUKE: Digital Pocket Thermometer: Mfr#: TPP1-C1, 1, EA; LI 038: 6DKD0 GRAINGER APP.: Pocket Liquid Glass Therm. (0-220 F): Mfr#: 6DKD0, 2, EA; LI 039: Harbor Freight: item#: 56329 BRAUN: Slim Bar Folding Magnetic LED 390 Lumens: Mfr#: 56329, 1, EA; LI 040: 5GEG7 TURBOTORCH: Brazing and Welding Kit: Mfr#: 0386-1323, 1, EA; LI 041: 2CZV9 UNIWELD: Carrying Stand with Tool Tray: Mfr#: 502, 1, EA; LI 042: 5YE63 FLUKE: Temp./Humidity Meter: Mfr#: FLUKE 971, 1, EA; LI 043: 3LZG3 FLUKE: Digital Pocket Thermometer: Mfr#: TPP1-C1, 1, EA; LI 044: 6DKD0 GRAINGER APP.: Pocket Liquid Glass Therm. (0-220 F): Mfr#: 6DKD0, 2, EA; LI 045: Harbor Freight: item#: 56329 BRAUN: Slim Bar Folding Magnetic LED 390 Lumens: Mfr#: 56329, 1, EA; LI 046: 5YE63 FLUKE: Temp./Humidity Meter: Mfr#: FLUKE 971, 1, EA; LI 047: 3LZG3 FLUKE: Digital Pocket Thermometer: Mfr#: TPP1-C1, 1, EA; LI 048: Harbor Freight: item#: 56329 BRAUN: Slim Bar Folding Magnetic LED 390 Lumens: Mfr#: 56329, 1, EA; LI 049: 6DKDO GRAINGER APP.: Pocket Liquid Glass Therm. (0-220 F): Mfr#: 6DKDO, 2, EA; LI 050: 5YE63 FLUKE : Temp./Humidity Meter : Mfr#: FLUKE 971, 1, EA; LI 051: 3LZG3 FLUKE: Digital Pocket Thermometer : Mfr#: TPP1-C1, 1, EA; LI 052: 6DKDO !GRAINGER APP.: Pocket Liquid Glass Therm. (0-220 F): Mfr#: 6OKDO, 2, EA; LI 053: Harbor Freight: item#: 56329 BRAUN: Slim Bar Folding Magnetic LED 390 Lumens: Mfr#: 56329, 1, EA; LI 054: 1KA-KEYED - 2002 MASTER LOCK : Alike-Keyed Padlock 15/16"" : Mfr#: 1 KA-2002 keyed, 18, EA; LI 055: FLUKE: Digital Pocket Thermometer: Mfr#: TPP1-C1 3LZG3, 1, EA; LI 056: GRAINGER APP.: Pocket Liquid Glass Therm. (0-220 F): Mfr# : 6DKD0, 2, EA; LI 057: BRAUN: Slim Bar Folding Magnetic LED 390 Lumens: Mfr#: 56329, 1, EA; LI 058: EXTECH: LCD Battery Operated Megohmeter: Mfr#: 380260 1YB52, 1, EA; LI 059: KLEIN TOOLS: Multi-Bit Screwdriver, 11-in-1: Mfr#: 32527, 2, EA; LI 060: EXTECH: Anemometer, 80 to 5906 fpm: Mfr#: AN100 1PKZ4, 1, EA; LI 061: CHANNELLOCK: 8 in. Adjustable Wrench: Mfr#: SWCB 1YHL6, 1, EA; LI 062: FLUKE: Temperature/Humidity Meter: Mfr#: FLUKE 971 5YE63, 1, EA; LI 063: WESTWARD: Metric Chrome Socket Set (73pcs): Mfr#: 53PN33, 1, EA; LI 064: WESTWARD: Metric Chrome Socket Set (73pcs): Mfr#: 53PN33, 1, EA; LI 065: MILWAUKEE: Screwdriver Bit Set (40pcs): Mfr#: 48-32-4006 45EU85, 1, EA; LI 066: MILWAUKEE: Headlamp, 475 lumes, LED, Rechargeable mfr#: 2111-21 419J78, 1, EA; LI 067: 11A180 DEWALT: �"" Cordless Impact Driver kit, 20.0V mfr#: DCF885C2, 1, EA; LI 068: 'DAYTLOAD ON CAPACITY, MOBILE 59'' SCISSOR LIFTING LIFT HEIGHT TABLE MAX 1500 LB, 4ZD01, 1, EA; LI 069: 2MPT2 DAYTON Manual lift, Manual Push Platform Lift 1000 I LB load capacity lifting height max 60"", 1, EA; LI 070: 2116-21 Milwaukcc 600 Lumens LEO USB Rechargeable 360 _Degree Visibility Hard Hat Headlamp, 6, EA; LI 071: Milwaukee 450 Lumens LED Spot/Flood Headlamp 2104, 24, EA; LI 072: FS-311 Bike Handle Trimmer, 2, EA; LI 073: FS560C-EM STIHL Brush Cutter, 1, EA; LI 074: 41932 Clearing Saw Blade, 4, EA; LI 075: 0000-930-2290 .130"" X 750' Weed eater String, 1, EA; LI 076: 0781-313-8004 STIHL 2 Cycle Engine Oil, 2, EA; LI 077: 15F196 WESTWARD: Pistol Grip Grease Gun, 6000 psi: Mfr#: 15F196, 1, EA; LI 078: LUBRIMATIC: Lever Grease Gun, 7000 psi: Mfr#: 30-802 49EV70, 1, EA; LI 079: NUPLA: Nonsparking Sledge Hammer, 1-1/2 lb.: Mfr#: 30015 4A105, 1, EA; LI 080: STANLEY: 25 ft. Steel SAE Tape Measure, Green Mfr#: 30-305 2KFJ3, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/d8fd646357ed41a781f2d39d3ee851cd/view)
Place of Performance: Address: Bldg 249 Boxcar St. , Pope Army Airfield, NC 28308, USA; Zip Code: 28308; Country: USA
Record: SN05994155-F 20210508/210506230117 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

51 -- 51--tools